Jump to content
Why become a member? ×

My DIY black hardware refurb..


BassTool
 Share

Recommended Posts

Decided to refurbish the black hardware on one of my basses as it was looking decidedly neglected after spending life in the cupboard under the stairs for way too long. In fact, the whole bass looked in need of some TLC.

 

IMG_20210407_162311_808.thumb.jpg.fd0d84188c6e5edcab9795fd7acab833.jpg

 

IMG_20210407_163653_120.thumb.jpg.494cf55d7beb904f229f8e1243d1c5b0.jpg

 

IMG_20210407_163713_697.thumb.jpg.2ff54eeb98f5ec98ced85b2c905255ad.jpg

 

I stripped everything off, including washers and nuts from the controls, and sanded down to bare metal, doing a final clean with brake cleaner then primed the parts before applying several coats of Plastikote black spray paint.

I put the various screws from the bridge and the tuner cover into the top of a cardboard box, pushed through small holes so that just the head was painted.

I also removed all the grub screws, saddle screws, springs and adjusting bolts and put them in a container of penetrating oil.

 

IMG_20210411_100049_350.thumb.jpg.d84a3fb37f8ecce9b4fbfbae43480015.jpg

 

Cleaned all the knobs with an old toothbrush and soapy water.

And eventually ended up with everything looking a lot better.

IMG_20210411_152338_292.thumb.jpg.776cc4f064a1f8b522032026c3d13ba9.jpg

 

Whilst waiting for paint drying/hardening I took the opportunity to thoroughly clean the neck, it was desperately in need of 'moisturising'.

I see there's another thread gone up about this. I use small round cleansing pad wipes and nail varnish remover (alcohol based) followed by my own lemon oil mix - two parts extra virgin olive oil, two parts white vinegar and one part freshly squeezed lemon juice. Initially the wood is really clean and looks dried out by the alcohol - it is, but it's ok. The lemon oil, which I apply with the same type of cleansing pads needs to soak into the wood for at least 24 hours, but it works brilliantly and rejuvenates the rosewood really well - do NOT use on maple necks, and if you do try the 'recipe' make a sparing amount of it up, it does not keep!

This was the rosewood before the lemon oil:

IMG_20210411_133402_815.thumb.jpg.c7f51bce521762ae5f900aafcbc602f7.jpg

And the type of grime to come out of the rosewood:

IMG_20210411_130951_854.thumb.jpg.7502a5ab9a5636bf0fd721554079bd5c.jpg

 

And during soaking:

IMG_20210411_134238_252.thumb.jpg.6b85d7be9137759d581fb6ef9aabcb89.jpg

 

Once everything has dried, paint has hardened, and neck given a final dry buff, time to put it all back together.

IMG_20210412_173335_736.thumb.jpg.2bace11eaf5259a4a6b0eabca9090fb2.jpg

 

IMG_20210412_173452_357.thumb.jpg.2566ad81bd2c63f15dab8d052ee38c75.jpg

 

 

IMG_20210412_173236_489.thumb.jpg.5456ec57c6faf9e8187c3dc8bec10fe4.jpg

 

IMG_20210412_173417_462.thumb.jpg.84b3c5c138cdfaddbf97db642bd8f178.jpg

1729460400_IMG_20210412_175658_6782.thumb.jpg.7d606d12d637078ece1dd62175502a71.jpg

A new set of strings on, full set up, and hopefully this will be getting used this year 🤞

  • Like 9
Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...