*SOLD Markbass Little Mark II Limited Edition. 500W @ 4 (Shipping in UK price included) £300 WV14 West Midlands

[geoff90guitar]

IExcellent bass amp. (Italy) Plenty of power depth and tone.
First class working order with carry case. There's no need to take  it out of the case when gigging, zip up and good night lads.

Welcome to trial here through my Vans or bring your own cab, observing Covid rules.

Can post/ship.

Geoff

Ive copied some light reading from elsewhere about this model (goes on a bit):

To celebrate this great honor, Marco De Virgiliis has created the Markbass Little Mark II Marco Limited Edition 08. Only 500 will be produced, and each one will be tested, approved, and signed by Marco personally. This collector's item will not last. 

The Markbass Little Mark II is a stunning bass amp head that combines great sound, compact size, and light weight. Its small size makes the Little Mark II easy to transport, yet with a 4-band EQ, VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter), its tone is nothing short of professional. The I/O includes an input that can handle both passive and active basses and an extra XLR balanced input for double bass pickups. Its Neutrik Speakon Combo out jacks work with 1/4" or Speakon speaker cables. A tuner out jack sends unbalanced signals to a tuner, amp, or recording equipment. Send and return effect jacks maintain your main signal even if something dies in your effects chain.

FEATURES
Solid state preamp analog bass head
Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
1/4" input jack works with active or passive basses
Balanced XLR on front for double bass pickups
Gain and Master volume controls
Clip warning light
EQ includes controls for Low, Mid Low, MId High, and High
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
Balanced XLR out
Ground lift switch to eliminate hum
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
Effect Send and Return maintain signal even when effects fail
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
Surface-mount components are silicon-sealed to isolate vibrations
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
Integrated threaded posts for easy assembly/disassembly and added durability
Rigid 2mm thick aluminium chassis
SPECIFICATIONS
Power
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
Voltage is factory preset for the U.S.
Controls
GAIN -80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT: switch on rear panel
Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW MID
Center frequency 360Hz, level ±16dB
HIGH MID
Center frequency 800Hz, level ±16dB
HIGH
10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
center frequency 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250Hz-20kHz (cut)
Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"
Other
Dimensions: 10.87"W x 2.8"H x 10.1"D
Weight: 6.39 lbs

 

 

Edited April 19, 2021 by geoff90guitar
Added picture

[geoff90guitar]

Bit of a larph really.

[geoff90guitar]

Bump now we can see the light.

Shipping now included UK mainland.