Jump to content
ricksterphil

Glockenklang Blue Rock PRICE DROP NOW SOLD
£850
Nottingham

Recommended Posts

FOR SALE ONLY Glockenklang Blue Rock £850.00  NOW £750 + SHIPPING  NOW SOLD ELSEWHERE

I'm probably going to regret this but up for sale is my Glockenklang Blue Rock head with gig bag

This is an awesome bit of kit so I'm not sure why I'm selling it except that I've just bought an Ashdown ABM 600 off here to get a bit of tube warmth into my sound and cos @walshy reckons the ABM 600 through a Barefaced Super 12 sounds mint (I have this cab so thought - what the hey)

Photos to follow but for now here's the thread for my purchase from this very parish

Courier at cost - it will be super well packed. I have the rack ears btw

My pics

IMG_20210208_181813.thumb.jpg.e88c45be950beae0f45fa080dd590a5c.jpg

IMG_20210208_181825.thumb.jpg.aa6874d8e6aef9b6b4624a49ddd46174.jpg

IMG_20210208_182149.thumb.jpg.044bcaacb78ba41dc16ae65d22040c4c.jpg

Edited by ricksterphil
Adding pics
  • Like 4

Share this post


Link to post
Share on other sites

Amazing amp. I would be strongly suggest you keep it! Could you not warm up in your signal chain instead? 

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites
10 hours ago, andybassdoyle said:

Amazing amp. I would be strongly suggest you keep it! Could you not warm up in your signal chain instead? 

Yes, I've considered that.

I might well end up keeping it

Share this post


Link to post
Share on other sites

Alternatively, buy a Vanderkley 2x12, as I had one of these through one of those and it sounded MINT! 😂

Seriously though, these amps are the business. Even the bag and power cable are class!

  • Thanks 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By Sapatown
      Hello,
      I am wondering if the Matamp GT2 MKII works for bass aswell? I know its a 100w tube amp, and I will pair it with an Ampeg 810 or a Barefaced SIX10 (610)
      One channel is based on the GT1, and the other channel is a bit more high gain, I assume its a guitar amp, but I have heard the brand makes amps that works for more than guitar.
      The Barefaced 610 do have 1500 watt RMS. Do you think that would be a cool amp and cab pair? Any experiences?
      And will it be loud?
      I really don't know if the Matamp GT2 works good for bass, but I have the chance to go try it aswell. Just wonder if any of you know this.
      I know bassists that use their G120 with their cabs and love it. I also know bassists that use the Matamp 1224. But I have way to little experience with this brand myself,
      but love their style and sound.
       
      Cheers!
    • By Arnoldoc
      Moving on my trustworthy Eden WT550. Bought new around 10 years ago. Comes with a rack case. Has been used and case has signs of use but amp is in perfect working order.
      Happy for buyer to collect or meet near London
      Done many trades in Basschat 
       
       
      Specs as follows:
      Power: 500 Watts @ 4 Ω THD: <.5% Amp Modes: Mono Frequency Response: 10Hz - 15KHz Speaker Connection: Speakon or 1/4" Weight: 19 lbs / 8.6kg Dimensions: H: 3.5 in / 8.8cm, W: 12 in / 30.4cm, D:12 in / 30.4cm  
       
       


    • By BCH
      SONIFEX RB-HD2 HEADPHONE AMPLIFIER Analogue, 2 stereo outputs
      Excellent condition and fully working. Great for live wired IEM or headphone rehearsals /studio. Original box
      The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input. A switch on the rear panel enables the distribution of a mono signal to all four outputs (i.e. both earpieces of a pair of stereo headphones) via the left channel input. The stereo/mono switch is located on the rear panel to prevent accidental knocking.
      The XLR-3 inputs are electronically balanced and can be wired unbalanced. There are two pre-set controls on the rear panel that adjust the level of the master input signal to the outputs. Each output is on a ¼” stereo jack socket and is designed to drive 150mW into 32 ohm to 600 ohm stereo headphones. The outputs are individually buffered with their own front panel volume control. A LED power indicator on the front panel displays the power supply connection.
      Audio Input Impedance >20kΩ balanced bridging (main) Max Input Level +28dBu Input Gain Range -12dB to +20dB gain (pre-set pots) Output Level Drives 150mW into 32Ω to 600Ω headphones Volume Controls -80dB to +11dB gain   Connections Main Stereo Inputs 2 x XLR 3 pin female (balanced, can be unbalanced) Outputs 2 x ¼” (6.35mm) A-gauge 3-pole stereo jack sockets Mains Input Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max Fuse Rating Anti-surge fuse 100mA 20 x 5mm (230VAC)   Anti-surge fuse 250mA 20 x 5mm (115VAC)   Dimensions (WxDxH) 48.0 cm x 10.8 cm x 4.2 cm Boxed Dimensions (WxDxH) 53.0 cm x 20.5 cm x 6. cm Weight 1.35 kg Boxed Weight 2.00 kg https://www.canford.co.uk/Products/95-645_SONIFEX-RB-HD2-HEADPHONE-AMPLIFIER-Analogue-2-stereo-outputs
      Collection or post UK only £15
       

    • By Mama Huhu
      As new and now, it seems, like hen's teeth, literally bought last year, used at one 3-hour gentle rehearsal a fortnight ago and it's sat in a rack since the day I bought it. Fully tested, has all original packaging, includes rack ears, sounds utterly flawless and is as light as anything! Only selling as I got an unexpected deal on an Epifani UL901. Collection from Salisbury SP1 but I might consider a courier at your expense and risk. I'd ideally like to sell this but I'm open offers or to trades for a decent bass or guitar. I play Spector active basses, for instance - what ya gots? 









    • By loremil
      Selling this Eich T-500 head and 112-XS 8 ohm cabinet as they are surplus to my needs.
      £600 for the head
      £450 for the cabinet
      £1000 for both items.
      Purchased in November 2020, the condition on these is excellent as they've only seen home use. Very loud and lightweight, the sound is punchy and can easily be tailored with the versatile Taste knob.
      Can ship the head, but collection only for the cab please, can meet buyer anywhere in London. Thanks for looking!
      Amp Specs:
      Features Extremely lightweight Ultra compact Switching power supply Class-D Poweramp Super silent digitally controlled fan Magnet Fix pins (not availible in the US) »Taste«-Filter 4-band EQ pre/post »DI out« Transformer balanced »DI out« Ground Lift switch 115 / 230V switch
      Preamp: solid state preamp with gain, taste, lo, lomid, himid, hi, master controls, switchable mute, DI pre/post, XLR transformer balanced DI out with Ground Lift Switch, parallel effects loop, tuner out, line out, line in Output RMS: 500 w (4 ohms), 300 w (8 ohms) Power Amp: Class D Power Consumption: 600 W Output: Speakon® combo connectors with ¼“ jack DI Out: transformer balanced, pre/post, ground lift switchable Dimensions: (W x H x D) 27 cm x 4,5 cm x 21 cm / 10.7" x 1.6" x 8.3" WEIGHT: 1,49 kg / 3,28 lbs
      Cab Specs:
      Features High-quality 12“ Ceramic speaker TE12D 4“ CT1 cone-driver Tweeter setting switch Extremely lightweight construction Classic grill cloth Neutrik Speakon® Combo connectors Non-slip rubber feet Ampfixing 45° Monitoring position steel pin Model: 112XS Configuration: 1 x 12” Ceramic speaker Power RMS: 300 W Cone driver: 4” CT1 cone driver with tweeter setting switch Sensitivity: 99 dB Freq. Response: 40-19.000 Hz Impedance: 8 ohms or 4 ohms Connections: 2 x Neutrik Speakon® parallel Dimensions (W x H x D): 44 cm x 45 cm x 35 cm / 17.4" x 17.8" x 13.8" WEIGHT: 12,3 kg / 27,1 lbs
×
×
  • Create New...