Dad3353 Posted January 18, 2021 Share Posted January 18, 2021 OK, I'll go with the current dimensions. I'll still be needing those home addresses, of course. In your own time. 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 18, 2021 Share Posted January 18, 2021 On 13/01/2021 at 21:27, Dad3353 said: Wotchit, matey; I've much stranger 'friends' that I can 'call upon'. In the interests of transparency, as they say these days, here is a full cast list for The French Connection. Well done that man! It's always good when someone steps up to answer a call for assistance. 2 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 18, 2021 Author Share Posted January 18, 2021 Address sent. 👍 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted January 18, 2021 Share Posted January 18, 2021 Ditto. 👍 3 hours ago, mcnach said: Can you print a Stonehenge stage prop? Do you have a napkin as a guide? 1 1 Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 25, 2021 Share Posted January 25, 2021 (edited) I printed a batch 'face-down', but the pins don't come out properly; the plastics too tiny to be useful. I've done another batch, 'face-up', which is much better. It's as easy to print six as one, so I did. Here's a 'teaser' uber-short video; real-time was three hours. I'll prepare them tomorrow; it's late now. They'll be in the post soon ... Edited January 25, 2021 by Dad3353 5 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 25, 2021 Author Share Posted January 25, 2021 From my point of view the pins aren't vital if they're proving tricky. Obviously I can't speak for @Rich. Once again, thank you. 🙂👍 Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 25, 2021 Share Posted January 25, 2021 Not so much 'tricky' as not feasible with this material..! Quote Link to comment Share on other sites More sharing options...
Rich Posted January 25, 2021 Share Posted January 25, 2021 Pins are absolutely not an issue, I'll take a pinless badge over no badge any day. Dad you're a superstar, thank you. 2 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 25, 2021 Author Share Posted January 25, 2021 22 minutes ago, Dad3353 said: Not so much 'tricky' as not feasible with this material..! Not a problem at all. 🙂 1 Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 28, 2021 Share Posted January 28, 2021 'The Eagle has flown'. I repeat : 'The Eagle has flown'. 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 28, 2021 Author Share Posted January 28, 2021 -- . ... ... .- --. . / .-. . -.-. . .. ...- . -.. / .- -. -.. / ..- -. -.. . .-. ... - --- --- -.. .-.-.- / .. / . .- --. . .-. .-.. -.-- / .- .-- .- .. - / .. - ... / .- .-. .-. .. ...- .- .-.. .-.-.- 😉 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted January 28, 2021 Share Posted January 28, 2021 .- ... / -.. ... / .. .-.-.- -.-- --- ..- / ... .. .-. / .- .-. . / .- -. / .- -... ... --- .-.. ..- - . / .-.. . --. . -. -.. .-.-.- 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 30, 2021 Author Share Posted January 30, 2021 Well, I've just had a knock at the door and opened it to find Michael Caine, Donald Sutherland and Robert Duvall on my doorstep. Sutherland hands me a packet (well places it on my step, stands back 2 metres and takes a photo of it) and informs me that "The Eagle has landed". @Dad3353, these are fantastic! Thank you so much. Soooo much better than having to resort to a vinyl sticker. The white is actually fine as it is but I'm off to fish out some gold paint in a mo and paint the top surface of one. A little sneaky peak. Once again thank you, a legend indeed. 😊👍 12 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted January 30, 2021 Share Posted January 30, 2021 Looks ace that 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 30, 2021 Share Posted January 30, 2021 Oh that works WELL. The 3d badge brings out the 3d effect of the pearloid(?). 1 Quote Link to comment Share on other sites More sharing options...
Teebs Posted January 30, 2021 Share Posted January 30, 2021 Really good! 👍 1 Quote Link to comment Share on other sites More sharing options...
pete.young Posted January 30, 2021 Share Posted January 30, 2021 Great job Dad3353! 1 Quote Link to comment Share on other sites More sharing options...
Moldsight Posted January 30, 2021 Share Posted January 30, 2021 Wow just Wow Fantastic job Dad3353 first time I have seen results from 3D printing, really good. 1 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted January 30, 2021 Share Posted January 30, 2021 They look brilliant! 1 Quote Link to comment Share on other sites More sharing options...
Cato Posted January 30, 2021 Share Posted January 30, 2021 (edited) That looks pure class. Excellent result from Douglas. Is that the restoration finished now @Maude? Any chance of some pics? Edited January 30, 2021 by Cato 1 Quote Link to comment Share on other sites More sharing options...
Happy Jack Posted January 30, 2021 Share Posted January 30, 2021 Love that. 2 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 30, 2021 Share Posted January 30, 2021 (edited) 11 minutes ago, Happy Jack said: Love that. IBTL Edited January 30, 2021 by SpondonBassed 7 Quote Link to comment Share on other sites More sharing options...
Maude Posted January 30, 2021 Author Share Posted January 30, 2021 2 hours ago, Cato said: That looks pure class. Excellent result from Douglas. Is that the restoration finished now @Maude? Any chance of some pics? No not finished yet. I've got to fit the pickups/switches/controls and then try and wire it up so it works. I've been a bit slack but I just haven't felt like doing it for the last couple of weeks. These badges will spur me on now so will be finished soon. 2 Quote Link to comment Share on other sites More sharing options...
Rich Posted January 30, 2021 Share Posted January 30, 2021 Excitement here also! Arrived safely this morning and I have to say I am blown away by their quality. Quite incredible. Here's one placed in situ on my bass, already looking a zillion times better than the previous gold vinyl decal. This and Maude's build have got me inspired to restore my bass to good working order. Watch this space. 5 1 Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted January 31, 2021 Share Posted January 31, 2021 I'm loving these Hofner rebuild jobbies! For me, they are a nice size bass, quite small and light, and the lovely neck inlays have so much character! I think a mid and neck pickup placement would be well worth trying , as is often noted, the bridge pickup doesn't yield particularly useful tones. 1 Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.