Jump to content
Why become a member? ×

Markbass Nano Mark & Markbass Traveller 102P => SOLD!
£250
Ghent, Belgium


Bassdude BE
 Share

Recommended Posts

FS: Markbass Nano head & Markbass 102P 4Ohm    NOW WITH FREE SHIPPING TO U.K/EU ZONE 1 MAINLAND!! ;)
 
Hi,
I'm looking to buy a bigger rig, so my Markbass Nano is up for grabs.
 
The amp was bought new march last year and has hardly seen any use, so both technically and aesthetically the amp is still in perfect condition.
 
The amp is rated at 300watts, but it definitely is LOUD, in a direct comparison with a Markbass Little Mark III (which is rated 500Watts) I could hardly notice any difference in volume between the two, so the little guy definitely packs a punch!
 
Also, unlike some other MB heads, the fan in this is dead quiet!
 
I'm looking to get 275Euro/ 250£ for this.
 
 
I also have a matching Markbass 102p cab that I bought at the same time as the Nano, 400watts, 4 Ohms (so you can get the full power out of the MB Nano) and just 14kg that I might be willing to sell if the Nano sells,
 
Please note that I will NOT sell this as long as I still have the Nano tho as they are a match made in heaven in both weight, portability and sound!
 
For the 102P I would be looking for 375Euro/ 340£
 
As both the amp a,nd the cabinet are ridiculously lightweight
shipping within Europe/U.K. is no issue at all and fairly cheap.
 
Feel free to contact me if you have naymore questions.
Kind regards,
Greets & Grooves!
 
Bassdude's Bassment

 

 

123228521_383590212880716_6383090250120787217_n.thumb.jpg.c10eeacfa9e794a015e8e4362f382a54.jpg123462595_728185544443512_288839585719947986_n.thumb.jpg.650b73e09271010dee3e362f133877e6.jpg123530894_3612591912155819_9149898326044527313_n.thumb.jpg.8b9077e0dc43ec4ce2e7fb7f741b886c.jpg

Edited by Bassdude BE
Link to comment
Share on other sites

Nano Mark spec sheet:

INPUTS

INPUT: impedance 2 Mohm, max. voltage 15 Vpp

  • EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
  •  
  • CONTROLS
  • GAIN
  • MASTER VOLUME
  • GROUND LIFT (switch on rear panel)
  • PRE/POST EQ (switch on rear panel)
  •  
  • EQUALIZATION
  • LOW: center frequency: 40 Hz; level: ±16 dB
  • LOW MID: center frequency: 360 Hz, level: ±16 dB
  • HIGH MID: center frequency: 800 Hz, level: ±16 dB
  • HIGH: center frequency: 10 kHz, level: ±16 dB
  •  
  • OUTPUTS
  • LINE OUT: balanced XLR, max. voltage 20 Vpp
  • EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
  • TUNER OUT: unbalanced, max. voltage 2 Vpp
  • SPEAKER OUT: speakon/1/4" combo
  •  
  • OTHER
  • WEIGHT: 3.20 lbs / 1.45 kg
  • WIDTH: 7.87 in. / 20 cm
  • DEPTH: 8.27 in. / 21 cm
  • HEIGHT: 2.09 in. / 5.3 cm
  • OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 

 

nano_mark_300_side.png__1980x1980_q85_subsampling-2.png

nano_mark_300_rear.png__1980x1980_q85_subsampling-2.png

Edited by Bassdude BE
Link to comment
Share on other sites

MB Traveller 102p-4 spec sheet:

IMPEDENCE: 4 ohms

SPEAKER SIZE
2x10 in.
BASS PORT
rear
TWEETER
piezo
POWER HANDLING
400W RMS (AES Standard)
CROSSOVER FREQUENCY
3.5 kHz
FREQUENCY RESPONSE
45 Hz to 18 kHz
SENSITIVITY
101 dB SPL
WEIGHT RANGE
27.78 lbs / 12.6 Kg to 31.97 lbs / 14.5 Kg
WIDTH
23.23 in. / 59 cm
HEIGHT
12.60 in. / 32 cm
DEPTH
17.13 in. / 43.5 cm

trv_102_front.jpg__600x600_q85_subsampling-2.jpg

trv_102_rear.jpg__1980x1980_q85_subsampling-2.jpg

Link to comment
Share on other sites

5 hours ago, panos71n said:

hello, is shipping to Greece possible for the cab only?

 

Hi @panos7,

 I've got someone coming over next week who's interested in buying both the amp and cab.

So I'm going to wait untill then,

if  it turns out he doesn't buy the set we can discuss shipping the cab. ;) 

 

Kind regards,

Stay safe! 

Don

Link to comment
Share on other sites

  • MB1 locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...