Jump to content
Why become a member? ×

Sold - Fender Nate Mendel Precision with significant mods
£800
Manchester


ManchesterWill
 Share

Recommended Posts

Been a long-time lurker on here since a brief appearance in 2014 and have been toying with selling this for a little while now, but feel like needs must! So, for sale is my early Nate Mendel Precision with some serious mods. Feels great, sounds killer! Having recently had a baby (child number 3) and working full-time over lockdown, I haven't been able to give it quite as much love as I'd have liked before selling and there are a couple of things that I'd have sorted with more time. I will, of course, include these in the advert in italics so there are no surprises. But if this does suit anyone here and you bite, you'll be getting a lot more than £800 worth of gear - I've shunted the cost down to compensate for these small defects. 

The bass

Fender Nate Mendel Precision - purchased in 2014

 

1474255729_IMG_20200711_1402431.thumb.jpg.e72f3a2edcaa60714d6692bc86d34317.jpg

 

The mods

- Bareknuckle Scatter-Wound 58 Split-Coil P-Pickup. Sounds seriously rich and punchy - currently £118.80 from BK website

https://www.bareknucklepickups.co.uk/pickup/p-bass/p-bass-58-split-coil-p

- Bareknuckle Hand-Wound 60-PE Jazz Bass bridge pickup added. Currently £94.80 from BK website

https://www.bareknucklepickups.co.uk/pickup/j-bass/j-bass-60-pe

(Type in 'Bareknuckle Bass Pickups' on Youtube and watch Nolly's vid with the Fretking Perfection Bass (the first hit) for a good indication of the sound.)

- Fender '62 Precision Tortoiseshell Pickguard. £80 on Thomann website

https://www.thomann.de/gb/fender_pickguard_precision_13holes_tt.htm?sid=63b5ec8fb17da8314d06f69bda44abad

- 3-way selector switch added (I asked for either VVT or the three-way switch but the guys at the Guitar Repair Workshop ended up doing both). 

- Neck re-lacquered for faster movement. I found the lacquer far too thick and sticky so Jack at Jack's Instrument services re-did the whole neck for me - still a vintage tint but much faster and smoother. Bear in mind that the headstock signature and serial number was removed in the process and some paint around the neck joint chipped further than the original relicing. 

 

The extras

Without any further cost than the £800 asking price, I am happy to throw in any of the following that you'd like:

- The original Seymour Duncan Quarter Pounder pickups

- A set of Thomastik Infeld Flats (not on bass currently)

- A mint-green pickguard which also accommodates the selector switch

- A black 3-ply pickguard (replica, but brings the bass back close to the original look of a NM precision)

- The bass will come with a Hiscox hard case

 

The issues

Tone pot needs replacing. It has cracked - with more time I'd have sorted it. 

Bass picked up an additional paint chip. Obvious in the photos - the red scraped off to reveal the gold undercoat in a section near the bridge

Small chip on the body at the neck pocket. Looks a little scruffy but doesn't affect playability in any way. 

 

And finally, here are some more photos! This is a serious amount of bass and goods for the price, and the main issues are only cosmetic/easily fixed. Given the family situation this is for sale only; no trade offers please. Happy to post at buyer's arrangement and expense, but would recommend a meet-up (close-ish to Mcr and of course respecting current Covid-19 guidelines) if at all possible so you can assess the bass for yourself. 

 

1971440510_IMG_20200711_1438311.thumb.jpg.d1779f5563954a3201712dd9a6a99466.jpg

 

IMG_20200711_140253[1].jpg

IMG_20200711_140305[1].jpg

IMG_20200711_140321[1].jpg

IMG_20200711_140415[1].jpg

IMG_20200711_140831[1].jpg

Edited by ManchesterWill
Link to comment
Share on other sites

  • 4 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...