Sparky Mark Posted August 29, 2020 Share Posted August 29, 2020 17 hours ago, isteen said: I have a 8ohm 15” - but how do I check If the internal speaker is 4 or 8 ohm? Probably the only sure way is to take the grill of the front of the combo, remove the speaker and see if the impedance is marked on the rear of it. Quote Link to comment Share on other sites More sharing options...
Deedee Posted August 29, 2020 Share Posted August 29, 2020 On 28/08/2020 at 11:55, isteen said: Can anyone help me out? Unfortunately I don’t have pics of the back of this combo. Can a 15” be added to this combo for extra beef? thank you There should be two speaker outs on the back, one of which currently being filled by the jack from the internal speaker. This combo will be fine to add another 8ohm cab to as the photo shows that it still has it's original kevlar impregnated TE 15" speaker fitted (which is 8ohm). 👍 Quote Link to comment Share on other sites More sharing options...
isteen Posted September 17, 2020 Author Share Posted September 17, 2020 (edited) Here is another Trace Elliot combo I use. Can you tell med if I can add a 15" cab (8ohm) without breaking anything? Edited September 17, 2020 by isteen Quote Link to comment Share on other sites More sharing options...
Paul S Posted September 17, 2020 Share Posted September 17, 2020 Only the windows. 3 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted September 17, 2020 Share Posted September 17, 2020 49 minutes ago, isteen said: Here is another Trace Elliot combo I use. Can you tell med if I can add a 15" cab (8ohm) without breaking anything? If it has two jack sockets and 'minimum load 4 ohms' you can fit two 8 ohm cabs (the built in one is normally 8 ohms). Quote Link to comment Share on other sites More sharing options...
Deedee Posted September 17, 2020 Share Posted September 17, 2020 Yep, same again like @Stub Mandrel said. Quote Link to comment Share on other sites More sharing options...
TheGreek Posted September 17, 2020 Share Posted September 17, 2020 2 hours ago, Paul S said: Only the windows. I think this went over the heads of many readers... 2 Quote Link to comment Share on other sites More sharing options...
isteen Posted September 18, 2020 Author Share Posted September 18, 2020 10 hours ago, Deedee said: Yep, same again like @Stub Mandrel said. Same thought here, I am just in doubt about the internal speaker - I have no idea if it is 4 og 8 ohm Quote Link to comment Share on other sites More sharing options...
isteen Posted September 18, 2020 Author Share Posted September 18, 2020 9 hours ago, TheGreek said: I think this went over the heads of many readers... Yep Quote Link to comment Share on other sites More sharing options...
Deedee Posted September 18, 2020 Share Posted September 18, 2020 29 minutes ago, isteen said: Same thought here, I am just in doubt about the internal speaker - I have no idea if it is 4 og 8 ohm All of these Trace 4x10 combos and cabs were 8ohm and designed to be hooked up to another 8ohm cab if so desired (eg 1x15, 1x18, or another 4x10). It will be fine. 1 1 Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.