Jump to content
Why become a member? ×

SWR Super Redhead Combo & Son of Bertha 1x15. SOLD!
£400
Nr. Bristol


Rblake80
 Share

Recommended Posts

Up for sale is my SWR Super Redhead with extension Son of Bertha 1x15 Cabinet.

Both have been in my possession since new (purchased 2002). Purely need the funds at the moment to pay the bills which is why they're up for sale and very competitively priced. £400 for both sold as a pair. Depending on interest I may decide to split, but at present am only selling together.imageproxy.php?img=&key=d49e236f730b63a2

Would Ideally like a pickup, or meet-up halfway (distance dependent). For anyone with a project studio, I don't think you can get finer that a 'one thing does most' studio combo. The original power on/off rocker switch has been replaced (as visible in pics)

The 1x15 has been replaced with a Beyma LX60 (Version1) after the original SWR cone's centre started to make a bid for freedom many years ago! Specs of the Beyma can be found in the link: The addition of the 1x15 really helps add some weight to the sound, although the combo alone is perfectly suited to most normal playing situations.

https://usspeaker.com/beyma 15LX60-1.htm

Both have had covers since day 1, so the carpeting is in excellent condition and I even dragged out the original spiral bound Super Redhead manual... Am sad to let these go, but hopefully someone out there knows the SWR legacy and wants to put these to good use - Sometimes lighter doesn't always mean better...

A few specs:

Super Redhead Bass Combo Specifications:
22-1/2"W x 21-1/4"H x 16"D (with the front cover attached, the depth is increased to 16-3/4") 80 lbs.

  • Classic SWR preamp with Aural Enhancer
  • 2 -12AX7 Preamp Tubes - (Preamp & Tube DI)
  • Front ported (slot) eliminates unwanted noise
  • All-tube studio-quality Direct Out with front-panel controls including ground lift, level pad, and mute
  • 3-band active EQ with variable midrange, pull turbo (ultra-low) and transparency (ultra-high) controls
  • SWR compressor circuit
  • Tuning Mute
  • Side-chain effects loop with Blend control
  • Single empty rack space for tuner or effects unit
  • Tuning Mute
  • Internal Speaker Defeat switch
  • 1/4" inputs (Active & Passive)
  • Gain control (with Pre Amp clip LED)
  • Aural Enhancer control
  • Bass control (with "Pull Turbo")
  • Mid-Range Level control
  • Mid-range Frequency control
  • Treble control (with "Pull Transparency")
  • Compressor control (with Compression LED)
  • Master Volume control (with Power Amp clip LED)
  • Tube DI Line/Direct (sliding switch)
  • Tube DI Mute/Line (sliding switch)
  • Tube DI Ground Lift (sliding switch)
  • Tube DI Pad control
  • 1/4" Headphone jack
  • Effects Blend control
  • Internal Speaker On/Off (rocker switch)
  • Power On/Off (rocker switch)

Son of Bertha Cab - Dimensions: 23.25 in. W x 20.25 in. H x 18.5 in. D Weight: 60 lbs.

Any questions then please ask and I'll do my best...

 

 

IMG_8852.jpg

IMG_8853.jpg

IMG_8854.jpg

IMG_8855.jpg

IMG_8856.jpg

IMG_8857.jpg

IMG_8858.jpg

IMG_8859.jpg

IMG_8860.jpg

IMG_8861.jpg

IMG_8862.jpg

IMG_8863.jpg

Edited by MB1
  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...