SOLD - Bitsa bass in bits! Fender MIM neck, Daphne Blue Alder body, Dimarzio Model P, Gotoh tuners
£400
Walton-on-Thames

Misowaki · June 3, 2020

ONO

This was my main boy for a spell but it's always been a chop 'n' changer hence it being in parts. Ideally I'll sell this in two parts but I can sell the neck and tuners separately if you prefer.

Fully loaded body - £175
We have a Daphne blue Alder body bought from BC maybe 2 or 3 years ago. Set up for through body stringing if you have a bridge that facilitates it. Comes with basic bridge and strap pins. It's not a tight neck pocket, maybe 1 or 2 mm extra space. Depending on your neck/ howyou like your set up, you may want to shim it. A little notch has been made to allow for truss adjustments to a USA neck I had on there once. Not visible with a regular pickguard, of course.
It is loaded with an old Dimarzio Model P, wired for parallel/series with a push/pull pot. Not sure what that pot is but maybe a Dimarzio, it came wired with the pup. The tone pot is CTS with an Orange Drop capacitor. Swithcraft jack socket. Can also supply the red guard pictured. Oh, and it has the ashtray.

Neck and tuners - £200
2018 MIM Maple neck with Gotoh Tuners (unattached as two of the holes are wider than the pre-made holes so rather than attach them I've left them off should anyone want one without the other. Happy to attach them for you. String tree is included. In the pic you'll see a previous failed attempt at attaching one with a brass screw which died so I made a new hole and the bodged hole isn't visible when strung.)