Jump to content
Why become a member? ×

Before I ruin a new neck...clever people advice needed...


donslow
 Share

Recommended Posts

15 minutes ago, donslow said:

Thank you for that, quite insightful although I do have to admit, you lost me a bit with all the swinging and moving and marking of the tips and curves, some pictures (if you can) would be massively appreciated and might help worm it into my skull a bit...

 

Just in the process of reducing the photos. 

Link to comment
Share on other sites

Right here goes.

 

Telecaster template with 38mm nut.  P-bass template 42mm nut.

Templates.thumb.JPG.91f4fc7e3876d7dc213698fb8b95dd1b.JPG

To get the E tuner area just get the template touching top and side. Draw round it.

512857998_ETuner.thumb.JPG.3280c1624d389156e1d2b7b7e74466d3.JPG

Place your template to the G side of the nut. Mark 1

562663171_Point1.thumb.JPG.1bc1143fcec64e092844fc158a825140.JPG

 

Set Point 2 .

25098523_Point2.thumb.JPG.d77a76175cc21019261ea321169e76f5.JPG

Move the template to give a clean line for Points 1+2.

764925321_Join1and2.thumb.JPG.8aeaca7db4ff698a3f75a989457d9448.JPG

 

All points joined 🙂

509114829_AllPointsJoined.thumb.JPG.ce730ebe1c11c07a3d19a6503de3304e.JPG

  • Like 1
Link to comment
Share on other sites

11 minutes ago, kodiakblair said:

Right here goes.

 

Telecaster template with 38mm nut.  P-bass template 42mm nut.

Templates.thumb.JPG.91f4fc7e3876d7dc213698fb8b95dd1b.JPG

To get the E tuner area just get the template touching top and side. Draw round it.

512857998_ETuner.thumb.JPG.3280c1624d389156e1d2b7b7e74466d3.JPG

Place your template to the G side of the nut. Mark 1

562663171_Point1.thumb.JPG.1bc1143fcec64e092844fc158a825140.JPG

 

Set Point 2 .

25098523_Point2.thumb.JPG.d77a76175cc21019261ea321169e76f5.JPG

Move the template to give a clean line for Points 1+2.

764925321_Join1and2.thumb.JPG.8aeaca7db4ff698a3f75a989457d9448.JPG

 

All points joined 🙂

509114829_AllPointsJoined.thumb.JPG.ce730ebe1c11c07a3d19a6503de3304e.JPG

Think I see what you did there! 

if I may ask another question, providing I follow the steps as above, when printing a template, would it be best to print so that but is 38mm (as is my neck) or larger or smaller?!

ive been using (or trying to) this template (mike dirnt one at the bottom)

bass heads-1 2.pdf

Link to comment
Share on other sites

4 minutes ago, donslow said:

providing I follow the steps as above, when printing a template, would it be best to print so that but is 38mm (as is my neck) or larger or smaller?!

It leads to a lot of faffing about Dan,I've tried scaling before . Sometimes they print out shorter instead of just a narrower nut. print at 100%.

 

All that matters is the lines flow together in a pleasing way 😎

  • Like 2
Link to comment
Share on other sites

1 hour ago, kodiakblair said:

It leads to a lot of faffing about Dan,I've tried scaling before . Sometimes they print out shorter instead of just a narrower nut. print at 100%.

 

All that matters is the lines flow together in a pleasing way 😎

Thankyou! Gonna sift through the templates I’ve got printed here and try again in the ‘morrow...

  • Like 1
Link to comment
Share on other sites

5 hours ago, Stub Mandrel said:

May I suggest just rounding it out a little more in teh yellow area, it looks too straight in your pic.

image.png.849444e909d520e78d7602b6a5b466cc.png

Well spotted sir! Noted and adjusted as necessary!

3 hours ago, kodiakblair said:

@donslow

 

It's looking lovely 👍

all thanks to you and your idiots guide to drawing a headstock ha ha

hopefully get to work on it Tuesday...

  • Like 1
Link to comment
Share on other sites

1 hour ago, donslow said:

Well spotted sir! Noted and adjusted as necessary!

all thanks to you and your idiots guide to drawing a headstock ha ha

hopefully get to work on it Tuesday...

Happy to supply those few pointers to help you on your way 🙂

 

BTW

I'm just back from Brian's unit. Fender 51 pickguards are now part of the inventory 😎 He's used my Fender Japan for the template so it's the rounded horns found on the reissue and Sting models.

 

https://www.ebay.co.uk/usr/earlpilanz

Edited by kodiakblair
Link to comment
Share on other sites

42 minutes ago, donslow said:

Thank you for the heads up! Very Much appreciated

I'd also gave him a Harley Benton PB-50 plate to scan. No good for your bass  but perfect timing for Brian,he had 3 on order for a fella in Italy and only a paper tracing to work from 😁

Link to comment
Share on other sites

Looks good to me.

The hardest part is knowing when to stop...

 

I've ordered a Harley Benton kit and that comes with a basically rectangular headstock. Not sure whether to do a classic 'fender' or put the 1987 spiky Fender headstock on it for a 'bass that never was'...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...