Jump to content
Why become a member? ×

[SOLVED] Aria CSB-380 - advice (seriously) appreciated!


dominininic
 Share

Recommended Posts

Hi all,

Have just picked up an Aria CSB-380 bass and have spotted a few problems, especially one regarding fret buzz. The bass came with what appear to be tapewounds and immediately there was fret buzz that occurred on all frets, as well as buzz created by just playing any of the strings. One of the saddle screws had worn on the e string so I could not adjust it that way, however I was able to raise the action on the e string using an elastic band between the bridge saddle and the string, and did the same on the top nut. This seemed to raise the action but was unsuccessful in eliminating the buzz. I even played around with washers where the neck is attached, however this made the problem worse.

I don't know if it's the bridge action, nut (it did look as though the strings had worn it down), strings or something else and am really stuck on diagnosing and fixing the problem. I have taken the strings off as I have removed the neck a few times. Is there anything I can do or should I take it to the local luthier?

Many thanks and sorry if this has been articulated poorly; am new to bass repair and troubleshooting.

DSC_0097.thumb.JPG.76c1071de1bf98fb669cb73fd72c1c20.JPG

Edited by dominininic
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...