Jump to content
Why become a member? ×

Hartke Kilo 1000W (or 500+500) Bass Head, Valve preamplifier / good to 2 Ohms ***SOLD***
£400
Nr Norwich


Dood
 Share

Recommended Posts

Kilo_HeadOn_Press-display.jpg

http://www.samsontech.com/hartke/products/amplifiers/kilo-amplifiers/kilo/

  • Stereo amps offer 500 watts per side at 2 ohms, 1,000 watts at 4 ohms in bridged mono mode
  • Class-A all tube (3 x 12AX7) high-voltage preamp circuit
  • Classic 3-band tone stack equalizer with variable Shape control
  • Selectable Deep and Brite EQ curves
  • Variable compressor
  • 10-band constant-q graphic equalizer with independent level control
  • Variable tube overdrive
  • Stereo Effect Loop send and return jacks
  • Dedicated front panel switches and footswitch jacks for Mute, Overdrive, EFX, and EQ
  • Multi-point direct output with level control
  • Twist & Lock and 1⁄4" parallel output connectors
  • Front and rear panel tuner output jacks
  • Separate left and right channel Preamp Out and Amplifier In jacks
  • Rugged 3-rackspace construction
  • Solid die cast front panel and oversized front panel handles
  •  

The Hartke Kilo raises the standard for bass amplification. It offers Hartke's classic tone, enhanced flexibility and an abundance of power, along with all the newest concepts in bass amplification design. Its amazing power and control make the Kilo Bass Amplifier the ideal choice for every situation—from recording studios, to small clubs, to giant stadiums.

The Kilo delivers 500 watts at 2 ohms of power per side in stereo mode, and a massive 1,000 watts at 4 ohms in the bridged mono mode. To sculpt your sound, the Kilo has an all-tube class-A preamp, and logically arranged tone controls. The amp offers a classic tone stack three-band EQ, with Hartke's variable Shape circuit. For additional tone shaping, there is a 10-band graphic equalizer, as well as selectable Deep and Brite EQ curves. To add some “dirt” to your sound, there is a variable tube Overdrive circuit, and to round out the dynamics, there is a fast and articulate Compressor circuit.

To connect your amplifier to speaker cabinets, the Kilo has both Twist & Lock and 1/4" output jacks. It also provides an abundance of connections and signal routing features, including multi-point direct output switching, stereo Effects Loop, front and rear panel tuner outputs and footswitch jacks to remotely control the Mute, Overdrive, EFX, and EQ functions.

Not only does it pack optimal tone control and more than enough power to drive any cabinet, the Kilo's rugged design is perfect for life on the road. Its solid 3-rackspace construction, solid die cast front panel and oversized handles make the Kilo an eminently road-worthy.

The Kilo Bass Amplifier is a robust bass head with full-range power and control that will shake the foundation for discriminating players in every style.

 

The manual for more details is here: http://www.samsontech.com/site_media/support/manuals/Kilo_OM_5L_v2.1.pdf

 

This amplifier is a beast. I would say it's primary competitor at launch would have been the Ampeg SVT 4 Pro - and in some ways it shares a few features. The head uses the same modules found in the LH1000 so it will do HEFT and volume. I can't think of too many other amplifiers that have such a feature set on board!

It's going to be collection only I am afraid, but I think its a good price considering the amp is in excellent condition and comes with a tasteful rack sleeve to protect it. 

 

Edited by Dood
  • Like 1
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...