Jump to content
TAzMilitello

SOLD - TC Electronics BG250-112 250W Bass combo
£199
MODICA

Recommended Posts

NOW SOLD this 250 watt good great little bass combo in great condition. This model can use 2 "tone print" effects that you can load from loads using your phone.

Being lightweight and relatively easy to carry is a huge bonus in a decent giggable bass amp.

Photo of this amp on the link: https://drive.google.com/open?id=13oI6w9-ALVnfAVxkbTDhRLuJqVirXu7w

Official website and specs can be found here: https://www.tcelectronic.com/Categories/Tcelectronic/Bass/Combo-Amplifiers/BG250-112/p/P0BRK 

Mainly I prefer to sell without trades!

Foreign Currency: about payments different from the Euros currency you can pay by clicking using this ►Transferwise bank transfer◄ link.

 

Feedback: 

ABOUT SHIPPING:

Bass is located in Italy (Sicily). No problems for international fast shipping (following prices including shockproof packaging):

  • To Italy: 30€ (1/2 working days)
  • To Ireland/Great Britain: 60€ (4/5 working days)
  • To Germany and Austria: 45€ (3/4 working days)
  • To Spain: 60€ (4/5 working days)
  • To France: 65€ (4/5 working days)
  • To Lithuania: 75€ (4/5 working days)
  • To Romania: 80€ (4/5 working days)
  • To Belgium, Luxembourg and the Netherlands: 65€ (3/4 working days)
  • To Czech Republic (CZ): 80€ (4/5 working days)
  • To USA and Canada: 110€ (6/8 working days)

71827591_10219395085163600_6497499681566752768_n.jpg

72237096_10219395091723764_6958102243656597504_n.jpg

71183929_10219395091203751_1091445700668948480_n.jpg

Edited by TAzMilitello
Sold

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By gorandelac
      Hi all, I'm selling my Alembic MK Signature Deluxe with Coco Bolo top, so here is little about the bass.
      Bass has no scratch, no belt buckle scratch, it's almost as brand new, as you can see from pics.
      Scale: 34"
      String spacing: 19 mm
      Fingerboard: Ebony with abalone
      Top: coco Bolo
      Back: Coco Bolo
      Body: Mahogany with maple and purplehearth as accent woods
      Neck: Maple with Purple Hearth stringers
      Finish: clean gloss with satin finish on the neck
      weight: 5.7 kg (with 5 9v batteries that goes into the bass, 4x for LED)
      Electronics: volume, pan, 2x filters, 2x q switches, 1x LED on/off, 1/4" mono output.
      LEDs are amber and red (check pictures)
      Bass was done in 2015, so it has 2+3 machine heads.
      Bass has original case, papers, everything. New one like this is 17.600 dollars, you can check here on Alembic site my bass is Sig Dlx Coco Bolo.
      This is I think only signature bass in EU that is available with this price. For any questions you can contact me. Here are some pic that justify the whole thing, other pics you can see on my dropbox:
      https://www.dropbox.com/sh/huwja8inhg3pt5e/AAAZ_-yhsAWuU_Zi-cx5C75fa?dl=0
       
      Price says 6000 5600 pounds but it's actually 6500 6300euros, just conversion is different every day.
       
      Also check my feedback page:
       
       











       
       
    • By BCH
      >125 editions of the UK Bass Guitar magazine, from 2008 to 2020 ( I think over that time they issued ~183)
      All in good nick, plenty of lockdown bass content?
      Collection only....all money going to the Hope centre  https://northamptonhopecentre.org.uk/
       
    • By Beer of the Bass
      70s Dynacord Eminent II amplifier.  This is a valve powered amplifier originally intended for PA use, using a pair of EL34 run at high voltages for a rated output of 80 watts.  In stock form the amp had a four channel transistor preamp, and was built to be very clean and linear sounding.  The perspex front panel has green lights behind it, so it's quite stylish in a kitschy way!  
      I have modified the amp by removing two of the transistor preamp channels and building a preamp based on a late 60s Ampeg B15n using a 6sl7 valve.  This is the four black controls on the right of the front panel.  I used a high voltage FET stage to match the output and impedance requirements of the 6sl7 preamp to the power amp section of the Dynacord, but the signal path for this bypasses all of the original transistor preamp circuitry.  I have also rebuilt the power amp with new filter capacitors and a new pair of JJ E34L valves, and set the bias to suit them.  The two original input channels and their master volume and EQ are still functional too. 
      With the Ampeg style preamp, it provides a very pleasing classic bass sound, and would be a good addition to a retro-minded studio or for moderate volume live use.  It doesn't provide heavily overdriven sounds, but with the preamp gain turned up it does a great subtle breakup that thickens up the sound nicely, and it also has a nice range of clean bass tones.  It's quiet in terms of background noise too.  
      It's relatively compact for a valve head, and comes with a well used but useful ABS flight case to carry it in.  It has impedance selectors on the back panel to run 4, 8 or 16 ohm cabs.  
       



    • By horrorshowbass
      Purchased on reverb.
      Happy so far, fretboard was well used, gunky shall we say. Gave it a good clean and sanded the back of the neck a little and set up, plays well so far. Got for reduced price, now I know why! Seller was upfront to be fair. I'll give it a few weeks. These are beautiful basses, the white with maple neck and black pg is🤟
      Haven't fully played but nice to have active jazz for 250 quid!

    • By alzamatt
      https://www.glockenklang.de/en/products/bass_systems/bass_art_classic_preamp.htm
      Some Tim's sign , using at home to record
      Final price 650€  500 €+shipping included
      Real deep and Cristal sound impressive recording with 










×
×
  • Create New...