Jump to content
Why become a member? ×

WITHDRAWN PLEASE REMOVE ABM IV RIG FOR TRADE/FS £650 IF SOLD TOGETHER
£750
STOKE ON TRENT


WAYNESWORLD
 Share

Recommended Posts

For Trade/FS  

Now willing to split

Head  £400

CAB    £325

If sold together £650

Looks like my gig'ing days are coming to a close. So I am looking to trade my beautiful pristine Ashdown ABM IV rig for something smaller.

Maybe a TH500/GKMB500 fusion etc Barefaced 0ne 10 or 2x10  1x12  Markbass etc Open to suggestions . Just need small footprint so equipment can stay in the bedroom without to much ear ache from she who must be obeyed.Anything in trade must be in equally pristine condition.

 

 

ABM600 IV HEAD

As Below Never gigged played through a couple of times in the bedroom. All tags and booklets also box  but missing a foam insert

Specifications

;>
Power Output 600 Watts
Power Requirement 115-230 Volts
Speaker Outputs 2 x Jack/Speakon outputs
Frequency Response -3dB @ 17Hz und 30KHz
High Instrument Input Impedance 3.9m Ohms, input range 150mV
Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input Impedance 22k Ohms, input level 0dBu nominal
DI Output 600 Ohm balanced, Level 0dBu nominal
Tuner Output Impedance 22k Ohms, Level 0dBu nominal
Impedance Minimum 4 Ohms Per Side
Effects Send Impedance 22k Ohm, Level 0dBu nominal
Effects Return Impedance 22k Ohms, Input Level 0dBu Nominal
Pre Amp Tubes 1 x 12AX7
H x W x D (mm) 135 x 474 x 335
Weight (kg) 12.5

 

 ABM-410H-EVO IV Cabinet

This has never been gigged, played through only a couple of times in the bedroom within the last few days.This was a gift for a project that never happened so needs to be sold.These nearly half the price of a new one's. Any trial  welcome along with tea and biscuits .The cab is as new with tags. Info below.

 

Bass Cab Carries the remainder of the Thomann warranty

Pick up , or willing to meet within reasonable distance from Stoke. Pics on request but head & cab are as seen below.

 

Cheers for looking.

 

 

Specifications

;>
Power Handling 650 Watts
Speaker Configuration 4 x 10" with Horn
Impedance 8 Ohm
Frequency Response 30Hz - 20kHz
SPL 103dB 1W @ 1m
H x W x D (mm) 660 (+20mm for feet) x 610 x 420 (+20mm for skids)
Weight (kg) 33

Screen Shot 2019-06-30 at 14.17.00.png

Screen Shot 2019-07-26 at 15.46.09.png

Screen Shot 2019-07-26 at 15.45.48.png

Screen Shot 2019-07-26 at 15.46.20.png

Edited by WAYNESWORLD
PRICE CHANGE
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...