scannerman Posted July 24, 2019 Share Posted July 24, 2019 So I'm sure there;s a simple answer out there.. I have an effects chain starting with a compressor to boss OC2 then into various overdirive, envelopes, chorus etc.... I would like to keep the OC2 as clean as possible in the final output without it going through all the other effects. Whats the easiest way to do this, ie: boss LS2?, Loop switches Any advise / experience appreciated Ta Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted July 24, 2019 Share Posted July 24, 2019 An LS-2 will do it yes, it’s one of the few pedals that can blend two effects in parallel. Also try putting the OC-2 last - common guidance is to put it first, but I prefer octave further down the line to keep the sub octave clean as you say, and I find dirt and envelope don’t negatively affect the tracking much at all! Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted July 24, 2019 Share Posted July 24, 2019 KMA Audio - The Tyler Lehle Basswitch IQ DI Quote Link to comment Share on other sites More sharing options...
itu Posted July 25, 2019 Share Posted July 25, 2019 I used to keep my COG T-16 first in the pedal board, but I tried it after the comp and it works far better. If you need a x-over (like that Tyler @Cuzzie mentioned), Iron Ether Divaricator is an option, too. You can ask them from: https://www.effekt-boutique.de/ Send a mail and ask for a unit. That company is helpful. 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted July 25, 2019 Share Posted July 25, 2019 KMA Audio marines offer a 7 or 14 day no quibble return on their pedals unless you have battered it So you could try it - you’ll have to pay postage back Quote Link to comment Share on other sites More sharing options...
scannerman Posted July 25, 2019 Author Share Posted July 25, 2019 Thanks peeps for your experience, I get myself sorted..... Quote Link to comment Share on other sites More sharing options...
redbandit599 Posted July 26, 2019 Share Posted July 26, 2019 This is quite new out - looks interesting https://www.ehx.com/products/tri-parallel-mixer 2 Quote Link to comment Share on other sites More sharing options...
Helbass Posted July 26, 2019 Share Posted July 26, 2019 I've done this one https://www.musikding.de/MadBox-Splitter-Mixer-kit. Not hard to do and works well. I also prefer my octave sound clean. If you like DIY of course. Quote Link to comment Share on other sites More sharing options...
Higgie Posted July 31, 2019 Share Posted July 31, 2019 Xotic Stereo Xblender is great. 3 parallel effects loops, 2 with variable blends, one with fixed 50/50 blend. Mono send, stereo return, plus stereo out. Total swiss army pedal for blending, multiple outputs etc! Quote Link to comment Share on other sites More sharing options...
stewblack Posted August 2, 2019 Share Posted August 2, 2019 On 26/07/2019 at 16:57, redbandit599 said: This is quite new out - looks interesting https://www.ehx.com/products/tri-parallel-mixer Can't wait to get one of these. Take my board to another level I reckon Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.