Jump to content
Why become a member? ×

The P-Rick : the gear to end all GAS ?


claustra

Recommended Posts

Agreed that wood looks amazing, and this looks stellar overall.

Judicious flaming of the wood can really make the grain pop and then it can be sealed/stained to choice.

For example8A6AA82F-08BF-4B9F-B8F0-2A64F5DBC537.thumb.png.7c2328c468fd2bdaf9824ba6b8ba0074.png

Blowtorching (prob more than you would do) took it to this

66A13C07-6099-4958-B25E-34CA99B2D6B3.thumb.jpeg.771a2c5fe2b0236750f173e3d1b8547b.jpeg

and then just stained with good old fashioned teabags went to this

DEECB386-E1BE-40FE-BE7A-2F5773D839B9.thumb.jpeg.63ba9e1cfd0b0be648d39b85c9bf0f2b.jpeg

i took it further and did other stuff, but could work for you?

  • Like 1
Link to comment
Share on other sites

20 minutes ago, claustra said:

@Cuzzie this looks good, blowtorching must take a lot of care.
I quite like the symmetry as well !

I had never heard about teabag staining on this side of the Channel, my Fender P is trans wine red :)

How did you eventually finish this body ?

After the tea stain (which was just 4 bags in water left overnight and then paint and let dry a couple times) I took wire wool and soaked it in vinegar again overnight and used this as a stain and eventually gun oil over the top for a Matt appearance

AD500157-0FB8-48D0-9C47-7A3C4A574B62.thumb.jpeg.ee1948d30807853139e780d3aacc58da.jpeg51E1D7EF-6525-4333-845D-C1367D4E20B5.thumb.jpeg.e87564fb8f2040748f07c1649ad0dabc.jpeg

Headstock sand, strip, flame and stain.

322D69AA-FC48-4D3F-A0A7-31C37C119E29.thumb.jpeg.2203ca08a3d83a83dfdb2eb7adb80558.jpeg

E557BCBD-7069-448B-8CFF-67F14C7F140A.thumb.jpeg.de1a2d063dafb52c586025ae630225ec.jpeg

EB4C8E4F-978E-4998-84DC-7C0E3E6DD344.thumb.jpeg.c66f3d64123a03f4d0881583d8efc6ad.jpeg

finished bass with matching headstock, Seymour Duncan pick ups, CTS pots, it was/is punchy as hell.

  • Like 3
Link to comment
Share on other sites

A nice effect with scorching on something open grained like oak especially quarter sawn is to wire brush it, scorch it black, wire brush it again and give it a final light scorch then seal with sanding sealer and apply a white grain filler (or any other colour)

Link to comment
Share on other sites

1 hour ago, Christine said:

A nice effect with scorching on something open grained like oak especially quarter sawn is to wire brush it, scorch it black, wire brush it again and give it a final light scorch then seal with sanding sealer and apply a white grain filler (or any other colour)

Seconded 

Link to comment
Share on other sites

Thanks for the examples and tips for natural / non chemical finishes.

I'll stick to the boring natural coulour and satin polyurethane finish on this one, but this gives ideas for possible spare part assembling that could be tempting some day !

 

  • Like 3
Link to comment
Share on other sites

9 minutes ago, claustra said:

Thanks for the examples and tips for natural / non chemical finishes.

I'll stick to the boring natural coulour and satin polyurethane finish on this one, but this gives ideas for possible spare part assembling that could be tempting some day !

 

:drinks: You won't regret it, that piece of wood is gorgeous

  • Like 1
Link to comment
Share on other sites

If you don't want to take a flame thrower to a body the stain mixed with grain filler route works quite well. This is an ash body, grain filled with filler mixed with dark brown stain to the desired darkness. Apply the filler, wipe of the excess and when fully dry sand the body.

t1cr.jpg

  • Like 7
Link to comment
Share on other sites

Quick update.

No visit this week as the bass was being lacquered when I was available, there would have been nothing i could see, or touch.

The body is 40mm thick.
The regular size for Fenders is 45mm. That should be roughly 10% lighter with no serious alteration to the sound and resonance.

Nut : bone

Electronics :
Nickel shielding
Cloth wire

Edited by claustra
Link to comment
Share on other sites

Yes, the thinner body shouldn't make any appreciable difference,(especially as no one will ever hear that body at any other thickness...😉) Ricks, Gibson EB's, SG's, and many other thinner bodies guitars and basses, seem to be considered OK, not lacking in "sound and resonance". 

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

The bass has arrived, I’ll take better photos when possible.

First impressions:

Well built for sure.

The splittable neck pickup is a great addition to the P. and sounds great on its own. I do not have any recording equipment to make decent sound files though.

 

One issue :

The two coils at the neck tend to (not sure this is the right way to put this) pull the E string and notes have a slight vibrato. I have lowered the pickup quickly and the tremolo is lighter, but still can be heard. The thinner A, D & G strings don’t seem to be affected.

No time to get into more details now.

 

 

77632A08-285F-41F6-BFDD-798FF53D5084.jpeg

6192EA70-2D0D-4123-A6EC-990976E0F577.jpeg

7E5DEA39-30C8-42B6-8AC1-7E0A54951930.jpeg

51C8877C-334D-439F-A950-05D5D35E3D83.jpeg

BD74F1C6-CC26-4F3F-8BA1-A764F6531A54.jpeg

Edited by claustra
  • Like 7
Link to comment
Share on other sites

  • 3 weeks later...

I really like the finished look, it is a beauty.

If the "tremolo" effect lessened after you lowered the pickup, hopefully taking it a little lower again (if possible) will fix things. Probably worth discussing this with the builder, if you haven't already. With the effect only being on the one string, the problem may not be pickup height?

Link to comment
Share on other sites

Sorry not to update the thread.
Loads going on these days.

I've been back to the builder with the bass and we have lowered the pickups, this has fixed the issue indeed.
As the output was originally quite high, I am even more happy with the sound now.

I would think that if only the biggest of the four strings was affected, that might come from the fact that it has more mass to be attracted by the magnets.

Regarding the neck pickup, the single coil and humbucking positions sound definitely different. The double coils have more volume and a more modern sound. I prefer the single coil with less compression.

I will try and find a possibility to make some decent sound clips when possible.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...