Jump to content
Why become a member? ×

!!! SOLD !!! ACOUSTIC IMAGE Focus 2 Series II (> 600 Watts @ 4 Ohms), fully revised by Acoustic Image USA in January 2019 !!!
£300


Recommended Posts

Thinning down the herd, so selling the amps or heads I don't use, and desperately trying to keep only one ... or two  :crazy:

 

FOR SALE ONLY :

 

ACOUSTIC IMAGE Focus 2 Series II (> 600 Watts @ 4 Ohms), fully revised by Acoustic Image USA in January 2019 !

 

Asking price including shipping fully insured with tracking number to your place in these European countries (ask for other countries) : Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France (excluding French overseas departments and territories), Germany, Hungary, Italy, Latvia, Lithuania, Luxemburg, Monaco, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and United Kingdom : £300 GBP !!!

 

In fully working condition and very good condition for its age.

 

Here are the specifications :

System

Frequency Response : 20 Hz - 20 kHz, ±0.5 dB

Distortion : <0.5%, full output, <0.1%, typical

Hum and Noise : -85 dB or better

AC Power : 115V/60 Hz or 230V/50 Hz, switchable

Size : 10 x 9 x 2.5 inches or 25.40 x 22,86 x 6.35 cm

Weight : 4.4 lbs or 2 kilos (on my precision scale)

Preamp (Mic and Instrument Channels)

Mic Input : 600 ohm balanced, XLR connector

Phantom Power : 38 volts, on/off switch

Instrument Inputs : Low impedance (1 MΩ),

                                   High Impedance (10 MΩ), separately buffered

Direct Out : +4 dB, balanced, XLR connector, ground lift

Effects Loop : Parallel type with return level control

Bass Control : Shelving type, ±15 dB at 60 Hz

Mid Control : ±15 dB at 650 Hz

Treble Control : Shelving type, ±15 dB at 10 kHz

Brite Control : ±15 dB at 9 kHz

Notch Filter : >-18 dB sweepable from 30 to 700 Hz

High Pass Filter : -12 dB/octave sweepable from 30 to 700 Hz

Power Amp

Topology : Class D (PWM)

Switching Frequency : 200 kHz

Output Power : >350 W @ 8Ω, >600 W @ 4Ω

Minimum Load : 4Ω

Output Connectors : Neutrik Speakon type (pole 1)

 

Will come with the original carrying bag, user manual, invoice of the revision and EU or UK lead.

Non-smoking environment as usual.

 

It has some marks, but nothing serious. This is a very clean, uncoloured and powerful sounding amp (the 600 Watts announced are really there). I really like the sound dead flat  very transparent and accurately reproducing the sound of your instrument. It's terrific with electric basses (fretless basses show their real potential) and of course with any acoustic instrument.

 

The amp has been fully revised in January 2019 by AI USA and is road ready for the next 10 years. Pay attention that the floor noise on these "old" amps is a bit higher than on recent amps (-85 dB when the most silent new amps can go as low as -120 dB), so it's not dead quiet especially when you put your ear on the speaker... So there is a very very very very very very very very very very slight floor noise which is not amplified even when the amp is turned to the full power (600 Watts !!!). Nothing compared to the inherent floor noise of a valve amp which is way more audible.

 

Link to Acoustic Image : https://www.acousticimg.com/assets/docs/manual_amp_head.pdf

What you see is what you get !

Look at the pictures to see the real condition : some marks, due to the age, but nothing serious at all.

Don't hesitate to ask for more.

Dust is offered. :biggrin:

1883563629_AcousticImageFocus2SeriesII(1).thumb.jpg.91b7a59b5e262d94f5cc0ea2172df92c.jpg

112138277_AcousticImageFocus2SeriesII(2).thumb.jpg.9eb963cc177b052cf836cb89ad7d3b3e.jpg

1250835355_AcousticImageFocus2SeriesII(3).thumb.jpg.5d316b1c58100443cdf3d85aadcfeb1f.jpg

1496170748_AcousticImageFocus2SeriesII(4).thumb.jpg.1b9de9790f0d7ea7dc6faffd78bb3946.jpg

936080898_AcousticImageFocus2SeriesII(5).thumb.jpg.ad25a6e61241365892e53cdd68649d7f.jpg

569273265_AcousticImageFocus2SeriesII(6).thumb.jpg.535bfa887451e602a8b1dde7a168f01c.jpg

711396657_AcousticImageFocus2SeriesII(7).thumb.jpg.ce7c7963652bfa9c69e622b943da0091.jpg

1429831597_AcousticImageFocus2SeriesII(8).thumb.jpg.3ad39d7bb6290805bb51a3c1d9fdee17.jpg

1355463840_AcousticImageFocus2SeriesII(9).thumb.jpg.ae41a435f23ed5330e80cdf8384f139a.jpg

1783622308_AcousticImageFocus2SeriesII(10).thumb.jpg.55c03ff871ab0817befa1a8334f15f18.jpg

6815885_AcousticImageFocus2SeriesII(11).thumb.jpg.e459a299016b2ac0b90a35afa982aa6c.jpg

1981670463_AcousticImageFocus2SeriesII(12).thumb.jpg.f02d278eaf87438a654096ce91da54b8.jpg

Edited by Hellzero
Link to comment
Share on other sites

  • ped locked this topic
  • ped unlocked this topic

Pay attention that the floor noise on these "old" amps is a bit higher than on recent amps (-85 dB when the most silent new amps can go as low as -120 dB), so it's not dead quiet especially when you put your ear on the speaker... So there is a very very very very very very very very very very slight floor noise which is not amplified even when the amp is turned to the full power (600 Watts !!!). Nothing compared to the inherent floor noise of a valve amp which is way more audible.

Edited by Hellzero
Link to comment
Share on other sites

  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...