Jabba_the_gut Posted December 23, 2018 Share Posted December 23, 2018 Always different ways to do things - I always make templates for routing pickups. I'll either make the temp!ate the right size if using a template cutter type router bit or make it oversize if using a normal cutter with a guide bush. I usually cut the rectangular part first then the cut outs for the lugs. So, completely the opposite way to Marco!! Quote Link to comment Share on other sites More sharing options...
Jabba_the_gut Posted December 23, 2018 Share Posted December 23, 2018 (edited) Here's a bit of routing on one of my basses for a pair of jazz pickups and a Warwick 2 piece bridge done using an oversized template and a guide bush. And a piccie of a couple of my basses with MM pickups using the same method for routing. Edited December 23, 2018 by Jabba_the_gut 1 Quote Link to comment Share on other sites More sharing options...
Guest Marcoelwray Posted December 23, 2018 Share Posted December 23, 2018 @Jabba_the_gut I think we do things same way... I was just saying an obvious method which consists to drill holes separately from the routing. I usually goes lazy way, anyway.... P2 format offers a wide range of sounds and is easy to rout. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.