Jump to content
Why become a member? ×

***SOLD***
£600


zander71
 Share

Recommended Posts

For sale is a very high quality "Bitsa" jazz bass very much in the style of the 1974 AVRI. Parts are as follows - 

 

Allparts block and bound rosewood jazz bass neck with authentic decal applied and lacquered

WD Music Vintage White 3 Piece American Alder body

Lindy Frallin Jazz bass pickups

Fender stamped 70s style tuners

Fender slothead bass bridge

Fender string tree

Fender neckplate and screws

Fender strap buttons

Vintage pots and wiring

Tort pickguard

 

Comes in a vintage style tweed case and is currently strung with flatwounds. Quite light and weighs around 7 1/2lbs in weight

20181130_195914_resized (2).jpg

20181130_195758_resized (2).jpg

20181130_195827_resized (2).jpg

20181130_184713_resized (2).jpg

20181130_185059_resized (2).jpg

20181130_185122_resized (2).jpg

20181130_185238_resized (2).jpg

20181130_185210_resized (2).jpg

20181130_195823_resized (2).jpg

20181130_195816_resized (2).jpg

20181130_195856_resized (2).jpg

Edited by zander71
  • Like 3
Link to comment
Share on other sites

What radius and rear profile does the neck have?

What type is the truss rod adjusting nut? Can it be adjusted without removing the neck?

Could you please elaborate on what you mean by “vintage pots and wiring”.

Edited by Quatschmacher
Link to comment
Share on other sites

Hi, not sure of the actual radius of the neck. It's probably more C type than modern. I have a Geddy Lee and it's deeper than that. Truss rod is adjusted at the body end of the neck and neck needs removed to adjust.

The pickups have cloth wiring and the pots are solid shaft CTS.

 

Thanks

Link to comment
Share on other sites

From the Allparts web-site.

 

  • 20 frets (.103" x .045")
  • Maple bass neck with white binding and vintage tinted finish
  • Rosewood fingerboard with white pearloid block inlays
  • 10" radius
  • Nut width 1.5"
  • Heel width 2-7/16"
  • Tuning peg hole diameter 11/16"
  • Truss Rod adjustment at heel
  • Neck thickness .89" at first fret, 1.00" at twelfth fret
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...