Dov65 Posted January 10, 2021 Share Posted January 10, 2021 @ead & @Cuzzie cheers for the input 3D covers it is 👍. Next up is black bridge/tuners & tree so where's best place to look Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 5 minutes ago, Dov65 said: @ead & @Cuzzie cheers for the input 3D covers it is 👍. Next up is black bridge/tuners & tree so where's best place to look Do you want to stick with a Sandberg bridge? Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 If so - here may be of interest https://sandbergshop.gambiocloud.com 1 Quote Link to comment Share on other sites More sharing options...
Dov65 Posted January 10, 2021 Share Posted January 10, 2021 Nice 1...prices aint bad at all. Might even buy the boxers 🙂 Quote Link to comment Share on other sites More sharing options...
mcnach Posted January 10, 2021 Share Posted January 10, 2021 42 minutes ago, Cuzzie said: If so - here may be of interest https://sandbergshop.gambiocloud.com ... until you go to pay and discover that UK is not listed 🙈 1 Quote Link to comment Share on other sites More sharing options...
jrixn1 Posted January 10, 2021 Share Posted January 10, 2021 The webshop recently stopped shipping directly to UK customers. I ordered a part this week via the UK distributor by emailing [email protected] ; it will be included in the next shipment of basses sent over (whenever that is - TBC). There may be delays as Germany is currently in lockdown. 2 1 Quote Link to comment Share on other sites More sharing options...
Dov65 Posted January 10, 2021 Share Posted January 10, 2021 Cheers for the info bud Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 43 minutes ago, Dov65 said: Nice 1...prices aint bad at all. Might even buy the boxers 🙂 You may be surprised to hear I have 2 pairs and 2 tee shirts and the cook book, not that I like Sandberg or anything...... good info on the distribution 2 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 10, 2021 Share Posted January 10, 2021 10 minutes ago, Cuzzie said: You may be surprised to hear I have 2 pairs and 2 tee shirts and the cook book, not that I like Sandberg or anything...... good info on the distribution So the cookbook is in English rather than German then ? Dave 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 29 minutes ago, dmccombe7 said: So the cookbook is in English rather than German then ? Dave Bien sur 1 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 10, 2021 Share Posted January 10, 2021 1 hour ago, Cuzzie said: Bien sur Vielen Dank 1 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 10, 2021 Share Posted January 10, 2021 Should have answered that in Gaelic but couldn't find an English to Scots Gaelic translator other than one that changed it to Thank Ye. That's more Scottish English slang. 😂 Dave Quote Link to comment Share on other sites More sharing options...
Dov65 Posted January 10, 2021 Share Posted January 10, 2021 Well thats a Sandberg black bridge & string retainer ordered £70 odd quid no 2 bad mind thru DV 247 never used them before...machine heads next up & that'll be it. 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 13 minutes ago, dmccombe7 said: Should have answered that in Gaelic but couldn't find an English to Scots Gaelic translator other than one that changed it to Thank Ye. That's more Scottish English slang. 😂 Dave Scot myself, my uncle speaks Gaelic so I should ask him! Quote Link to comment Share on other sites More sharing options...
krispn Posted January 10, 2021 Share Posted January 10, 2021 34 minutes ago, dmccombe7 said: Should have answered that in Gaelic but couldn't find an English to Scots Gaelic translator other than one that changed it to Thank Ye. That's more Scottish English slang. 😂 Dave Go raibh maith agat in Irish Gaelic which would be similar enough. 2 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted January 10, 2021 Share Posted January 10, 2021 20 hours ago, Cuzzie said: Would be my pleasure This is it next to a couple others I made/bitsa’d together It has a status P neck which I didn’t quite get on with. here is the body alone Plan is to either go for a maple with blocks like your classic Geddy - or I may actually get a status jazz neck, which I love, with no markings or logo and go completely stealth - it has a lovely tone to it. The body is a Fender Highway One I picked up second hand for a great price - so very well made Very impressive! You holding onto your various bits of handiwork or moving them on to make way for the next project? 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 Most of my stuff will be difficult to get rid of - I made them with specific sonic goals in mind, in my mind, which will in all honesty not suit most people - the shells/parts of course can be put to other uses, those not too routed and battered by me. What it does is give you an appreciation of cost and Labour, but also marvel at both top an bottom ends about what stuff does, what makes a difference etc. Would I pop my stuff against anything bitsa or self made (to a degree not done necks yet) absolutely sound wise - fit and finish would be lacking compared to proper luthiers. I would sell the self made ones last if I had to offload whatever I had, not just for sentiment. Long answer basically no plans, but doesn’t mean they may not leave! Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 10, 2021 Share Posted January 10, 2021 3 hours ago, krispn said: Go raibh maith agat in Irish Gaelic which would be similar enough. I thought so too but apparently the languages are different in many ways. From what i found In Scots Gaelic its tapadh leibh. Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 10, 2021 Share Posted January 10, 2021 @Cuzzie like that white P bass with maple looking neck. Little bit on the relic side but i would be happy with that. Dave 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 The white is a status neck, it’s camera flash but the maple one is actually gold but I did a white underneath the gold so as it relics, the white shows and I also seasoned and stained the wood of the whole body so that whenever that shows it looks old and not bright bare wood as it started out Here are the steps (there were multiple coats and stains relic process etc) 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 10, 2021 Share Posted January 10, 2021 12 minutes ago, dmccombe7 said: @Cuzzie like that white P bass with maple looking neck. Little bit on the relic side but i would be happy with that. Dave I did the relic specific to where and how I wear and play a bass great fun 1 Quote Link to comment Share on other sites More sharing options...
NancyJohnson Posted January 10, 2021 Share Posted January 10, 2021 (edited) I don't really like the Sandberg headstock, that said, these VMs dropped into my timeline a few days ago. The reverse headstock works for me... Edited January 10, 2021 by NancyJohnson 3 Quote Link to comment Share on other sites More sharing options...
dmccombe7 Posted January 11, 2021 Share Posted January 11, 2021 10 hours ago, Cuzzie said: The white is a status neck, it’s camera flash but the maple one is actually gold but I did a white underneath the gold so as it relics, the white shows and I also seasoned and stained the wood of the whole body so that whenever that shows it looks old and not bright bare wood as it started out Here are the steps (there were multiple coats and stains relic process etc) I def like that. Its been done very well with the relic'ing 1 Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted January 11, 2021 Share Posted January 11, 2021 Cheers - the bubble effect was heating with a blow torch till it bubbles, straight into the freezer for 20mins, they then just pop and scrape off - my fave bit Quote Link to comment Share on other sites More sharing options...
Raslee Posted January 11, 2021 Share Posted January 11, 2021 Put some EMG's in my Bullet and changed the pre to the EMG BQC. I think i prefer it over the Delano's...the Delano's were OK but love having the mid control on the BQC. Had to change the crappy EMG plastic knobs - now sporting much improved chrome knobs. 4 Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.