Jump to content
Why become a member? ×

Eden Metro querie


Paddy515
 Share

Recommended Posts

Hi all - just a quick one. Running the above Metro with a Mesa Powerhouse 115. Is it feasable to use an ABY and safely use the Y for both channels together. 2x10" 8 ohm Eden speakers and 8 ohm Mesa running at 3.67ohms in total through each channel independantly. Thanks and regards, Paddy.

Link to comment
Share on other sites

Unsafe is go under 2 Ohms. In your combination 115 4 Ohm cabinet must roar much louder than native Metro 210 8 Ohms, and then here is no logic when monitoring speakers are upstaged by boomy bottom of 15". My suggestion is to look for EDEN D210XST 8Ohm for reach and balanced Metro sound.  Good luck

Link to comment
Share on other sites

7 minutes ago, obbm said:

3 x 8-ohm speakers in parallel is 2.67-ohms.

What ABY are you planning to use, how and why?

Oh yes - brain fade!!  Anyway I knew it was at a safe level of impedance. Used to ABY a TE head and a Laney head into two different cabs (10's and a 15) with eq's set to different settings and mix the two to give me my overall sound. My son has a Fender Ramparte for his six string guitars which has a cool and a hot channel and borrows my Fender ABY pedal to mix his sound . I wondered if I could do the same with the Metro.

 

Thanks and regards, Paddy.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...