mybass Posted November 29, 2017 Share Posted November 29, 2017 My EBS chorus pedal shows all signs of life but no chorus happening. The power light (from T Rex power supply) switches on, the cables are all good and the thru signal is as it should be but no chorus when the button is depressed. Anyone with knowledge of these electronic things is welcome to comment? Quote Link to comment Share on other sites More sharing options...
T-Bay Posted November 29, 2017 Share Posted November 29, 2017 Could be anything, the led is often wired from the switch as opposed to off the board so only shows that the pedal has power and the switch is on. You could drop the back off and see if any of the components are obviously fried or if any of the solder joints look dry. Beyond that it gets more involved. Quote Link to comment Share on other sites More sharing options...
mybass Posted November 29, 2017 Author Share Posted November 29, 2017 I’ve taken the board out and cannot see any ‘fried’ or dry solder joints. Ongoing repairs! Cheers Quote Link to comment Share on other sites More sharing options...
mybass Posted December 13, 2017 Author Share Posted December 13, 2017 Its dead as far as the chorus effect is concerned. I've wet soldered all contacts but nowt happening. New MXR replacement in the pedalboard now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.