Jump to content
Why become a member? ×

Jazz neck SOLD
£165


Recommended Posts

Jazz neck NOT Fender but with Fender Jazz decal fitted.

Bought for a project that never happened.

Beautiful figuring on the wood.

Don't know the manufacture but its a Jazz style width nut
The width at the tail is 64mm

Asking for £130 delivered in the UK

 

ding.jpg

Headb.JPG

Headf.JPG

jneck.JPG

tailb.JPG

Edited by sunfish
reload
Link to comment
Share on other sites

A few questions:
[list=1]
[*]Can you verify that the neck is straight (some figured necks are prone to twisting).
[*]Are the frets in good condition ?
[*]What size are the tuner holes ?
[*]Is it inch and a half at the nut ?
[*]Is the nut plastic or bone ?
[*]Was it ever on a bass ?
[/list]
Thanks for your time.
Regards,
Mark

Link to comment
Share on other sites

Hi Mark

I bought it off ebay from someone who had been using it on a Fender Jazz. It didn't fit on my bass - VERY slightly too wide. so I didn't use it.

The neck is straight.
The frets look good. Just noticed a slight ding in the fretboard between fret 6 & 7. Tried to get a picture see if I can add it.




Tuner holes are 18mm

Nut is plastic and 38.1mm (1/1/2")

and the trussrod feels fine turns both ways with an allen key- but obviously Ive never had it on a bass

Hope this answers your questions OK.
Cheers

Link to comment
Share on other sites

  • 4 weeks later...
  • Josh locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...