Jump to content
Why become a member? ×

Sold - Bitsa jazz bass with Lakland 44-60 neck, Hipshot USA tuners and bridge, stacked pots and DR hi beams
£400


Westenra
 Share

Recommended Posts

This is bitsa jazz bass with the Lakland 44-60 neck dimensions as follows;

Nut Width: 1.5"
Nut Type: Delrin
Fret Size: .041/.085"
Width at Final Fret: 2.48"
1st Fret Neck Depth: .77"
12th Fret Neck Depth: .94"
Fingerboard Radius: 10"
Scale Length: 34"
Frets: 20

She also sports Hipshot USA tuners and bridge with a stacked pot control plate. I bought this bass as is but I've updated the pickguard, shielded the cavitys, machined a truss rod entrance into the body (so you don't need to take the neck off to adjust) and widened the bridge pup cavity as it was a bit tight. On the 4th fret of the G string there is a dent (as seen in the close up photo) where she fell from her stand onto a pedal (the pedal was fine hoorah) which has never affected the sound of playablity.

Collection would be around SW8/SW15 area

Postage is fine too and will be packed securely and safely

Comes from a pet and smoke free home

Feedback can be found here;

http://basschat.co.u...enras-feedback/

[

IMG_5175.JPG

IMG_5176.JPG

IMG_5177.JPG

IMG_5178.JPG

IMG_5179.JPG

IMG_5180.JPG

Edited by Westenra
Link to comment
Share on other sites

[quote name='MapMo' timestamp='1507748818' post='3387759']
what kind of wood is the body?
[/quote]

Couldn't quite tell you, I expect alder? I got this from a fellow BC user and he doesn't know what type of wood it is sorry. If there's any telling signs to look out for I can check.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • MB1 locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...