Jump to content
Why become a member? ×

Markbass New York 122 bass cab?


Greg.Bassman
 Share

Recommended Posts

[quote name='Greg.Bassman' timestamp='1487283897' post='3238717']
[font=arial,helvetica,sans-serif][size=4][color=#000000]Hi everyone. Some great feedback here, thank you![/color]

[color=#000000]I’m thinking of upgrading to the LM800, just for a little more headroom. It has a power handling of 800w RMS, will this work ok with the NY122?[/color]

[color=#000000]I have seen a few players on youtube using the LM800/NY122 setup (including jazz heavyweight Richard Bona himself). But I wanted to swing it past everyone here on basschat first?[/color][/size][/font]
[/quote]

Originally, the LM2/3 sounded quite a lot warmer and less clinical than the LM800, but they've changed a fair bit of spec since then, so now I'm not sure. I think they changed the LM3 to a Class D module a few years back.

I would try it how it is first....see if you need it.

Link to comment
Share on other sites

This thread has been very useful to me as this is a cab I've recently been looking at as a replacement for my 2 no name 1x12's. I am also going to be running a Markbass LM3 and my logic was the same as the OP - one 4ohm cab to minimise footprint and get the full 500 watts out of the head.

Great thread guys, thanks.

Link to comment
Share on other sites

[size=4][font=arial,helvetica,sans-serif][quote name='Musicman20' timestamp='1487326965' post='3238942']
Originally, the LM2/3 sounded quite a lot warmer and less clinical than the LM800, but they've changed a fair bit of spec since then, so now I'm not sure. I think they changed the LM3 to a Class D module a few years back.

I would try it how it is first....see if you need it.
[/quote][/font][/size]

[size=4][font=arial,helvetica,sans-serif][color=#000000]Hi Musicman20. You're right, the LMIII's are class D now. Unfortunately, I’m in no position to compare, as I have never owned the old class A/B version- as you say, it’s supposed to be ‘warmer’ sounding.[/color] [color=#000000]It[/color][color=#000000]’s seems that one common complaint about Class D amps is the lack of warmth[/color][color=#000000]; whereas others[/color][color=#000000] have argued that the power difference is negligibl[/color][color=#000000]e (w[/color][color=#000000]e could go on and on![/color][color=#000000] lol)-[/color] [color=#000000]ATEOTD, it really is down to the players preferences and how [/color][i][i][color=#000000]they[/color][/i][/i][color=#000000] hear it.[/color][/font][/size]

[size=4][font=arial,helvetica,sans-serif][color=#000000][color=#000000]From my research, the general [/color][color=#000000]feeling[/color][color=#000000] amongst LM800 users looks to be[/color][color=#000000] mostly positive; players noting it as c[/color][color=#000000]lean, punchy [/color][color=#000000]and[/color][color=#000000] true sounding[/color][color=#000000], with plenty[/color][color=#000000] of headroom[/color][color=#000000]. Apparently, t[/color][color=#000000]he flat setting has that great [/color][color=#000000]‘[/color][color=#000000]warm-clean[/color][color=#000000]’[/color][color=#000000] sound of the LM II[/color][color=#000000]/III and (while[/color][color=#000000] the difference in volume is negligib[/color][color=#000000]le)[/color][color=#000000] players have [/color][color=#000000]found [/color][color=#000000]that the EQ controls seem to have more of an impact.[/color][/color][/font][/size]

[size=4][font=arial,helvetica,sans-serif][color=#000000]Again, all of these points are subjective though, so... [/color][/font][/size]

Edited by Greg.Bassman
Link to comment
Share on other sites

[size=4][font=arial,helvetica,sans-serif][quote name='AdamWoodBass' timestamp='1487338616' post='3239115']
This thread has been very useful to me as this is a cab I've recently been looking at as a replacement for my 2 no name 1x12's. I am also going to be running a Markbass LM3 and my logic was the same as the OP - one 4ohm cab to minimise footprint and get the full 500 watts out of the head.

Great thread guys, thanks.
[/quote][/font][/size]

[size=4][font=arial,helvetica,sans-serif][color="#000000"]Hi Adam. Glad to know that this has helped you in some way. Let me know how you get on if you decide to go for a 122. Cheers.[/color][/font][/size]

Link to comment
Share on other sites

I have the 121p combo with ext cab and its as loud as my Ampeg SVT4 Pro. Used it in larger venues circa 150-200 without PA. I was depping and when i turned the amp on and not even at high volumes the sound guy said it sounded great on its own and no need to DI. My wife also said the sound out front was excellent and could hear the bass very clearly (Jazz bass).

Compare that to using my other main rig at that time of Ampeg SVT4 Pro and Berg HT322 and my back loves me now. Tonally i found you could get a "similar" tone from the Markbass rig.

Dave

Link to comment
Share on other sites

  • 4 years later...
On 12/04/2021 at 19:34, brinbasss said:

Pleased I saw the chat about the Mark Bass Ninja cab.  I'm thinking of adding one to my 2 x10 cabs. Was going to go for a single 15" or the 2 x 12. Suggestions welcome. Thanks : -)

I play in a fairly loud rock band running a Darkglass M900 into a Markbass NY122 & couldn't be happier.

Sounds awesome & dead easy to transport. 

Can't fault it at all 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...