Jump to content
Why become a member? ×

Post your pedal board - Basschat style!!


dudewheresmybass

Recommended Posts

47 minutes ago, andy67 said:

All four are the cheaper range of TC Electronic pedals. As some have said, Forcefield, Afterglow,  Nether and Skysurfer reverb pedal. All good and extremely well built. 

Not overly keen on the Skysurfer as is a bit overwhelming for a reverb pedal but the others are pretty good. 
 

 

The Nether is a very respectable octave pedal!

  • Like 2
Link to comment
Share on other sites

20 hours ago, andy67 said:

All four are the cheaper range of TC Electronic pedals. As some have said, Forcefield, Afterglow,  Nether and Skysurfer reverb pedal. All good and extremely well built. 

Not overly keen on the Skysurfer as is a bit overwhelming for a reverb pedal but the others are pretty good. 
 

 

Lordy! I'm not the only person who uses a forcefield with a bass 🙂

  • Like 1
Link to comment
Share on other sites

Newest build for recording some stuff with a few new DIY additions -

IMG_20210112_170033-1.thumb.jpg.40ab3ea111c99902b8c0d52343efb555.jpg

 

Brief notes for the DIY ones - 

IMG_20210112_170033-1_LI.thumb.jpg.75b7e5d31b2ec22add1206db5cbd781c.jpg

 

1 - Schalltechnik pumpernickel - Compressor

2 - EQD Arpanoid clone - Arrpegiator

3 - EQD Life clone - Tweaked Rat with octave and boost

4 - Modded blueberry clone

5 - Moosapotamous Dirty Bird - Mad squelchy fuzz - like a prunes and custard but angrier and less useful

6 - VFE Triumvate - 3-band distortion

7 - Catalinbread SFT clone with mods - Cranked SVT sound

8 - SUNN Model T preamp clone

9 - DBA Space Ring clone with mods - Very angry ring modulator 

10 - Frostwave funk-a-duck clone - Completely mad envelope filter 

11 - mid-fi pitch pirate clone - Modded to switch between internal LFO and extermal CV

12 - Sequencer - Puts out sequenced CV for the pitch pirate and phaser

13 - Lovetone Doppelganger clone

14 - EQD Rainbow Machine clone

15 - DBA Echo Dream clone - Modded heavily so it actually works...

16 - Madbean Dreamtime - Unique multi-mode digital delay

17 - Reverb - Belton brick based very spacey reverb

 

  • Like 7
Link to comment
Share on other sites

THIS IS COMPLICATED!  EXPLAINED BELOW

ALL SOURCE AUDIO EQUIPMENT EXCEPT MOOG expression and custom external switch. SA soleman MIDI controller, SA neuro hub.  All SA One Series pedals have 2 in/outs.  In/outs 1 are TS mono and are located above in/outs 2 which are TRS stereo.

GREEN: ts mono signal.

WHITE: Control signal for Neuro Mobile Editor.

YELLOW:  MIDI

PURPLE: MIDI-USB

RED: TRS patch (external control pedals)

BLUE: TRRS control cables

ORANGE: DC power 

Signals exiting board pigtail for easy connect/disconnect.  PURPLE leads to Laptop.  ORRANGE: power supplies 9V, 12V, GREEN: to ADA MB-1 EFX loop A send/return. YELLOW: to ADA MB-1 MIDI in

( EQ2 is dual stage.. EQ2 input 1 to outputs at 2 and input 2 outputs at 1.) Signal chain goes ADA MB-1 send to EQ2 input 2.  EQ2 output 2 to Gemini Chorus input 1.  Chorus output 1 to Spectrum Filter input 1.  Filter output 1 to TIP  input of INSERT Y cable into EQ2 input 2.  EQ2 output 1 to ADA MB-1  return.  The WHITE cable carries the Neuro Mobile Control signal from pedal to pedal on the TRS RING and is terminated when EQ2 output 1 sends a mono return signal to the ADA MB-1.  

 

 

My Pedalboard Diagram.png

Edited by Tube199
Forgot something
  • Like 2
Link to comment
Share on other sites

Just finished rewiring my RockboardTres 3.1 with the Mod 3 module, it works great! I went for this Mod so I can split the DI signal to IEMs and FOH without having to remember to carry a splitter around with me.  And the little jumper cable is wired so that when I want to plug my bass in with a cable, rather than wireless, I just unplug C and plug right in 🤘🏻

Warwick have really nailed this pedalboard system, I love it!

Oh, and new Darkglass ofc 😁😉

 

44A0837C-B033-4045-A58C-0C955FC467C7.jpeg

ADFD2573-6F6F-4C8A-BF87-F247CA926C62.jpeg

D380E91D-8362-4C60-B26A-75BB4EF8016B.jpeg

Edited by Kev
  • Like 6
Link to comment
Share on other sites

1 hour ago, Kev said:

Just finished rewiring my RockboardTres 3.1 with the Mod 3 module, it works great! I went for this Mod so I can split the DI signal to IEMs and FOH without having to remember to carry a splitter around with me.  And the little jumper cable is wired so that when I want to plug my bass in with a cable, rather than wireless, I just unplug C and plug right in 🤘🏻

Warwick have really nailed this pedalboard system, I love it!

Oh, and new Darkglass ofc 😁😉

 

44A0837C-B033-4045-A58C-0C955FC467C7.jpeg

ADFD2573-6F6F-4C8A-BF87-F247CA926C62.jpeg

D380E91D-8362-4C60-B26A-75BB4EF8016B.jpeg

How do you use the Slo? I'm very tempted!

 

Link to comment
Share on other sites

21 minutes ago, ThirteenDevils said:

How do you use the Slo? I'm very tempted!

 

I’ve not had it long! It’s really cool, the plan was to use it add some “ambience” to make clean parts more interesting, but it has some crazy modulation in it, real wacky yet usable tones, so much experimenting will be done!

Link to comment
Share on other sites

20 minutes ago, Al Krow said:

It's about as much fun as you can legally have with a Boss sized pedal.

Allegedly. 

I’m intrigued to know what illegal fun you can have with a Boss-sized pedal 🤯🤣

Edited by Merton
Spelling
Link to comment
Share on other sites

39 minutes ago, Al Krow said:

It's about as much fun as you can legally have with a Boss sized pedal.

Allegedly. 

Just arrived, Only had 20 mins on it (have a proper play later). I play in a post rock/sludge drop C type band. Determined to find a sound that will fit 😃

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...