Jump to content
Why become a member? ×

Multi FX pedal levels?


MacDaddy
 Share

Recommended Posts

[quote name='r16ktx' timestamp='1454930896' post='2974213']
Not completely sure what you mean by channel volume, unless it's pre amp gain, but does this help?
[url="http://line6.com/support/topic/2513-master-volume-or-channel-volume/"]http://line6.com/sup...channel-volume/[/url]
[/quote]

Channel\patch\editable pre-set, or however they are named, on my pedal the amp level controls the volume for this, then there is the master volume which is everything.
Thanks for the attached will have a read.

Link to comment
Share on other sites

[quote name='IBWT' timestamp='1454945545' post='2974468']
I always try to set the volume on my effects so that they match the volume without them, unless for some reason those effects need to be louder (e.g. boosters for soloing). Makes it much easier live.
[/quote]
Are they single fx's?

Link to comment
Share on other sites

[quote name='MacDaddy' timestamp='1455102730' post='2975834']
Are they single fx's?
[/quote]

Shouldn't matter. Unless the desired effect is to change volume temporarily (for solo etc.) all effects (both as part of a multieffect and single pedals) should really be set to unity gain (you can enable/bypass the effect and it should sound the same volume).
Not keeping an eye on your gain structure like this can cause problems later on.

Link to comment
Share on other sites

[quote name='elephantgrey' timestamp='1455125204' post='2976214']
Shouldn't matter. Unless the desired effect is to change volume temporarily (for solo etc.) all effects (both as part of a multieffect and single pedals) should really be set to unity gain (you can enable/bypass the effect and it should sound the same volume).
Not keeping an eye on your gain structure like this can cause problems later on.
[/quote]
But with multi fx you usually have 2 volumes, a channel \patch volume and a master volume.

Link to comment
Share on other sites

With your signal going through the multi fx but with no fx engaged the multi fx master volume should be set so that the volume is the same as it would be if you were plugged directly into your amp. That way if your multi fx ever died mid gig you can quickly go direct to your amp without upsetting the mix levels out front.

Then each fx can have its individual level set (as others have said) so that it matches fx engaged or not unless you want it to be different.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...