Jump to content
Why become a member? ×

The Official MARUSZCZYK CLUB!


Ulas Engin

Recommended Posts

1 hour ago, ezbass said:

Today I thought I’d check the hole alignment. Yeah, that’s not happening, they are not the same. I shouldn’t be surprised, 

No, I wouldn't be surprised for the early ones that were configured by email. I would imagine they have probably standardised them now as they have the web page configuration tool though.

Edited by Woodinblack
  • Like 1
Link to comment
Share on other sites

20 hours ago, ezbass said:

107 pages of content, including: opinions; problems; advice and porn, makes this a completely viable thread IMO, no matter what its origins. My Maruszczyks have been great and have consigned my 4003s to being merely decorative.

In other news, I’ve been toying with swapping the necks of my Elwood Ls over for a while. Today I thought I’d check the hole alignment. Yeah, that’s not happening, they are not the same. I shouldn’t be surprised, Adrian has said in the past that (at least back then) that each body and neck are made for each other. Hmm, other GAS reducing tactics must be employed methinks.

yes indeed , i can confirm that each body and neck are STILL made for each other from scratch. No "assembling" going on. Still 100% made at Mensinger Factory.

For example you cannot really fit a gloss neck with a neck pocket that has been cut / fit for a satin body and vice versa.... 

Edited by pierreganseman
  • Thanks 4
Link to comment
Share on other sites

6 minutes ago, NancyJohnson said:

Nah, just an observation.  

Out of curiosity, prior to the OP's (cough) sales pitch (cough), had there been any mention of Maruszczyk here?

I'm not sure - I seem to recall this thread started me on my Maruszczyk journey, so I'm grateful for it.

It it still bugging you four years later? 😄

Edited by wateroftyne
  • Like 1
Link to comment
Share on other sites

1 minute ago, NancyJohnson said:

Not so much...I guess because I contributed to the thread, I still get reminders when the thread is updated/added to.

Honestly couldn't care any less for the brand/manufacturer.

Orange button - top-right. Free yourself of this nightmare!

  • Like 1
  • Haha 6
Link to comment
Share on other sites

2 hours ago, NancyJohnson said:

Nah, just an observation.  

Out of curiosity, prior to the OP's (cough) sales pitch (cough), had there been any mention of Maruszczyk here?

Yep, loads, all the way back to 2008:

https://www.basschat.co.uk/search/?&q=Maruszczyk &search_and_or=and&start_after=1136073600&start_before=1422144000&sortby=relevancy

Link to comment
Share on other sites

4 hours ago, NancyJohnson said:

Not so much...I guess because I contributed to the thread, I still get reminders when the thread is updated/added to.

Honestly couldn't care any less for the brand/manufacturer.

 

Then what are you doing here? 

  • Like 1
Link to comment
Share on other sites

Whilst I must say that not all of their basses are for me (although I do really like the Sputnik), their configurator technology is great. It's a world class programme so far as I can see and the fact it is such a topic of conversation both here and on Talkbass proves it's worth. It's a great way of getting people to share builds and ideas and press on to make orders. Carvin/Kiesel should really get something like this on the go too. I'm surprised given Kiesel's 'ticky box custom' buisness model that they haven't already invested in a really great configurator tool like this. 

Link to comment
Share on other sites

8 hours ago, Chris2112 said:

Whilst I must say that not all of their basses are for me (although I do really like the Sputnik), their configurator technology is great. It's a world class programme so far as I can see and the fact it is such a topic of conversation both here and on Talkbass proves it's worth. It's a great way of getting people to share builds and ideas and press on to make orders. Carvin/Kiesel should really get something like this on the go too. I'm surprised given Kiesel's 'ticky box custom' buisness model that they haven't already invested in a really great configurator tool like this. 

+1

Link to comment
Share on other sites

Fender have a configurator as well now, not as many options as Adrian, but at least I could now order a fairly stock Daphne Blue Jazz with a maple board and choice of pickups if I had $1800 to spare - think I know where I'd rather spend that sort of money if I had it

Link to comment
Share on other sites

11 minutes ago, edstraker123 said:

Isn't that £7,000 less than a similar used Fodera.( The one above looks nicer IMHO.)

http://www.bassdirect.co.uk/bass_guitar_specialists/Fodera_Emperor_II_Elite_5.html

I’ve seen and played Marus and Foderas next to each other, I would rather have a Fodera :). Each to their own of course.

Si 

Link to comment
Share on other sites

4 hours ago, edstraker123 said:

Isn't that £7,000 less than a similar used Fodera.( The one above looks nicer IMHO.)

http://www.bassdirect.co.uk/bass_guitar_specialists/Fodera_Emperor_II_Elite_5.html

I was thinking the same.

4 hours ago, Sibob said:

I’ve seen and played Marus and Foderas next to each other, I would rather have a Fodera :). Each to their own of course.

Si 

Agreed each to their own, but (genuine question) why? What does the extra £7k (or similar amount) buy you?

Link to comment
Share on other sites

48 minutes ago, Wilco said:

I was thinking the same.

Agreed each to their own, but (genuine question) why? What does the extra £7k (or similar amount) buy you?

A better made bass. But it’s always going be totally subjective, how much that is ‘worth’ can’t be debated objectively.

Si

Link to comment
Share on other sites

10 minutes ago, Sibob said:

A better made bass. But it’s always going be totally subjective, how much that is ‘worth’ can’t be debated objectively.

Si

Perhaps to a degree, but not entirely as many aspects of a bass are quantifiable. Possibly a better made bass? Possibly should cost more? But £7k more!?!? Pass me the (two or three) Maruszczyk’s (or Sandberg, Mayones, AGC, Overwater, Dingwall, Warwick, Sadowsky etc) instead please!!!  🤔😀

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...