flunkie Posted July 1, 2014 Share Posted July 1, 2014 Hey all I have an LM3 and 2 Hartke 410s. Two queries: 1. The LM3 has a single output - is there a way to make it use both cabs? If so, how? 2. What will the output be? Sorry for the daft questions. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Ghost_Bass Posted July 1, 2014 Share Posted July 1, 2014 If the 410's have two connectors just plug from the LMIII out to first cab and link from first cab to second. If the cab's only have a single input connector then you need a "Y" cable. Quote Link to comment Share on other sites More sharing options...
yorks5stringer Posted July 1, 2014 Share Posted July 1, 2014 The Hartkes have 2 sockets on the back, cheaper ones have jacks, hi-drives have speakons too. Output into 2 cabs will be 500 watts at 4 ohms ( assuming the cabs are 8 ohms cabs). Quote Link to comment Share on other sites More sharing options...
flunkie Posted July 1, 2014 Author Share Posted July 1, 2014 Oh yes, forgot to say, they are Hydrive cabs. Thanks for the help. Much appreciated Quote Link to comment Share on other sites More sharing options...
machinehead Posted July 1, 2014 Share Posted July 1, 2014 If the LM III is like the LM II then it has two outputs. One Klippon and one dual Klippon/jack I think. Frank. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted July 2, 2014 Share Posted July 2, 2014 It's the other way round. It's a 1/4" jack & a Speakon-1/4" combi. You can either daisychain the cabs or use both outs on the head. It makes no odds. Output? I guess you mean how loud it will be? The amount of decibels depends on the sensitivity of the cabs. 2 cabs will move more air than one, therefor two shall be louder. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.