Jump to content
Why become a member? ×

**SOLD** Now £950 MarkBass Little Mark 800 and 6x10 1200w 106HR
£1000


jrturner77
 Share

Recommended Posts

[size=3][font=tahoma,geneva,sans-serif]So, sadly my bass playing days are over. Having been hoping for a cure for arthritis to pop up for the last six months, wife now demands back space in the house so clearing out all the gear.

This is a great amp set up. I bought the cab off here from SparkyMark and the head privately. Amazing sound and power to keep on going and drown out those pesky guitarists and drummers. I'm sure my old band mates will miss me.

Collection only, Sevenoaks in Kent, just off junction 5 on the M25. Not looking at any exchanges or swaps. For more pics or details ping me a pm or email [email protected]

Spec as below :

[color=#020202]The Little Mark 800 is basically a Little Mark III with an 800W digital power amp. This high-power head is created for those who need simple, intuitive and effective controls but also like to have a large supply of power and serious headroom. A great choice for big-stage applications, and for louder bands. Its sound is exceptionally warm and clear, both at low and high volumes. The ultra-fast response of the digital power amp allows the best reproduction of every minute detail in your playing. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.[/color]

HR106 Cab

[color=#282828]IMPEDANCE[/color]
[color=#282828]6 ohms[/color]
[color=#282828]SPEAKER SIZE[/color]
[color=#282828]6x10 in.[/color]
[color=#282828]BASS PORT[/color]
[color=#282828]rear[/color]
[color=#282828]TWEETER[/color]
[color=#282828]1" compression driver with custom horn[/color]
[color=#282828]POWER HANDLING[/color]
[color=#282828]1200W RMS (AES Standard)[/color]
[color=#282828]CROSSOVER FREQUENCY[/color]
[color=#282828]3.5 kHz[/color]
[color=#282828]FREQUENCY RESPONSE[/color]
[color=#282828]45 Hz to 20 kHz[/color]
[color=#282828]SENSITIVITY[/color]
[color=#282828]104 dB SPL[/color]
[color=#282828]WEIGHT[/color]
[color=#282828]71.18 lbs / 34.1 kg[/color]
[color=#282828]WIDTH[/color]
[color=#282828]23.4 in. / 59.4 cm[/color]
[color=#282828]HEIGHT[/color]
[color=#282828]34.2 in. / 86.8 cm[/color]
[color=#282828]DEPTH[/color]
[color=#282828]18.9 in. / 48 cm[/color]

[color=#282828]Also comes with a Roqsolid cover.[/color][/font][/size]

Edited by jrturner77
Link to comment
Share on other sites

Just in response to a few emails and messages, the Roqsolid cover is for the cab, not the head. I would prefer to sell together as one deal but if this is still here in some weeks time would look at dividing up. No, never had any problems with it and yes it is a Speakon cable connection which I will throw in (as I won't be needing it *sob*)

Cheers!

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...