Jump to content
Why become a member? ×

// sold /// Status Stingray 5 neck // sold ///


Recommended Posts

Hi bought this last year on here, don't really use it much. (was going to put it on my Ray35 but they don't fit!.... Fits my Stingray 5 fine though) So up for sale again. Comes with a set of Hipshot tuners.

£250 including delivery with tuners, £200 without.

New Pics below. There is some chipping around the B string tuning post, so there are some high res pics of that too. I hadn't noticed until i put it up for sale, so it is nothing too serious just cosmetic really. If it had MM tuners put on it you wouldn't even see it. Doesn't effect tuning stability at all, must have been done when the original owner fitted the tuners I guess... Anyway yer tis....









Cheers
TK

Edited by TommyK
Link to comment
Share on other sites

[quote name='Skezza' timestamp='1327755627' post='1516278']
whats the width of the neck at the heel I want to see if it will fit a mexican 5 string jazz

skez
[/quote]

Taken from the Status website:

All necks are designed to match up with the intonation
and fret positions of the original instruments.

34" scale (864mm)
20 frets on the Fender bass necks
21 frets on the Musicman 4
22 frets on the Musicman 5 string

2.5" (63.4mm) heel width on all 4-strings.
2.75" (69.8mm) heel width on MM5)


Hope this helps :)

Cheers
TK

Link to comment
Share on other sites

[quote name='Higgie' timestamp='1327783428' post='1516831']
Really want this :( No cash though I'm afraid. Interested in anything I have for sale at present?
[/quote]

What do you have in mind/want to swap?

Edited by TommyK
Link to comment
Share on other sites

If only I had one! I've had 2 in the past. Sold my first one because I didn't use it. Bought another because I just loved the sound. Then sold it again as I found I could get close enough with a combo of a few other pedals I have.

Unless you'd be interested in a trade for an old Boss CE-1? - The very first Boss pedal and the best Chorus/Vibrato ever made!

Link to comment
Share on other sites

[quote name='Higgie' timestamp='1327949294' post='1519328']
If only I had one! I've had 2 in the past. Sold my first one because I didn't use it. Bought another because I just loved the sound. Then sold it again as I found I could get close enough with a combo of a few other pedals I have.

Unless you'd be interested in a trade for an old Boss CE-1? - The very first Boss pedal and the best Chorus/Vibrato ever made!
[/quote]

Ah well... nevermind. I'm good for chorus thanks... tis still here anyway, you never know it might still be when you have the funds?....nothing seems to be selling in a hurry at the moment...tough times i guess...

Bump :)

Link to comment
Share on other sites

Hi there - are you sure the neck doesn't fit a ray35?
I would be very interested in buying this - but to fit it to my ray35.
I heard that this neck does fit & here is the link & photo:

http://www.talkbass.com/forum/f8/confirmed-status-neck-does-fit-sbmm-ray35-774032/
http://i56.tinypic.com/9g8vid.jpg

I would def buy this if it fits!
Cheers, Jonny

Link to comment
Share on other sites

[quote name='jonnypf' timestamp='1328197351' post='1523477']
Hi there - are you sure the neck doesn't fit a ray35?
I would be very interested in buying this - but to fit it to my ray35.
I heard that this neck does fit & here is the link & photo:

[url="http://www.talkbass.com/forum/f8/confirmed-status-neck-does-fit-sbmm-ray35-774032/"]http://www.talkbass....m-ray35-774032/[/url]
[url="http://i56.tinypic.com/9g8vid.jpg"]http://i56.tinypic.com/9g8vid.jpg[/url]

I would def buy this if it fits!
Cheers, Jonny
[/quote]
Hi Jonny.

I stand corrected! :D ;)

I'm sure it could be made to fit... the neck pocket on the Ray35 is smaller. Not by much mind, probable 1-2mm max. So with a bit of routing I'm sure it would go on fine, all other dimensions are identical. I reckon they do this so people don't stick genuine SR5 necks on them.

The reason i didn't do it was I wanted to keep the Ray 35 sell-able with its original neck... If you aren't fussy about really tight neck pockets then that is fine I guess... or maybe mine was just a one off??... The Status neck is tight on my SR5 too mind, but it does fit without modification...

Link to comment
Share on other sites

p.s just checked the picture....:[url="http://i56.tinypic.com/9g8vid.jpg"]http://i56.tinypic.com/9g8vid.jpg[/url]

I'm not convinced this is a Ray 35....

If it is, it has had an original style SR pickup + pickguard added at some point..... What do you think?

Link to comment
Share on other sites

[quote name='jonnypf' timestamp='1328203827' post='1523674']
I get what you're saying but why would someone go to the hassle of saying its a ray35?
Would be a very strange thing to do.. haha
[/quote]

Yeah probably.... who knows. Anyway I have someone with first dibs on the neck now, will send him pics tonight, If he decides its not for him will stick them up here so you can have a better look...

Cheers
TK

Link to comment
Share on other sites

[quote name='TheGreek' timestamp='1328385144' post='1526353']
Swap for a Crafter acoustic in a Protection racket case??
[/quote]

P'ms replied.

Still available folks, few interested parties, no firm sale yet.

Updated Price £250 delivered UK with tuners, £200 without. :)

+ New pics in first post.

Link to comment
Share on other sites

Three questions for yourself and those knowledgeable in such things.

Is it compatible with the Sterling 5? (I'm thinking that the neck dimensions are the same).

Are the tuners Ultralites?

What is the weight of the neck vs a wooden one?

Edited to add - it won't fit. 5 vs 6 bolt fixing :)

Peter

Edited by GreeneKing
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...