Jump to content
Why become a member? ×

Recommend me a cheap mic for BVs!!


Jamesemt
 Share

Recommended Posts

I'm thinking of maybe singing some backing vocals eventually, but would like to practice at home before making a fool of myself in front of the band :)

Can anyone recommend something cheap, but which would be OK for the odd gig.

Edited by Jamesemt
Link to comment
Share on other sites

Try the T.bone MB85 which is a decent copy of the classic Shure 58 and a good value for money. I use it for backing vocals on rare occasions and I have blind tested it with an original 58, the one that our singer uses, and you couldn't tell a difference.

Link to comment
Share on other sites

[quote name='bass_ferret' post='149347' date='Mar 1 2008, 09:54 AM']After 50 odd years there is still only one SM58. You can buy a cheapo copy but an SM58 is for life. You can get them now for about £70 and I really cant see the point in getting anything else.[/quote]


+10000

Only ever used 58s.

Link to comment
Share on other sites

Our singer uses an SM58 and the two on BVs use Behringer ultravoice CM8500s - (as used by Alice cooper & Ann Peebles according to the Behringer web site). They're about £16 (from dv247.com). We've been gigging ours for a few years and they haven't broken yet, even with a drummer doing BVs & ocassionally mistaking it for a cowbell. I bring an old 80s SM58 along to gigs just as a spare, but haven't needed it yet.

[url="http://www.behringer.com/XM8500/index.cfm?lang=eng"]behringer XM8500[/url]

- it comes with a nice case & stand clip as well.

Link to comment
Share on other sites

[quote name='fleamail' post='149338' date='Mar 1 2008, 09:41 AM']Try the T.bone MB85 which is a decent copy of the classic Shure 58 and a good value for money. I use it for backing vocals on rare occasions and I have blind tested it with an original 58, the one that our singer uses, and you couldn't tell a difference.[/quote]

+1 on these. If you go for a secondhand 'genuine' SM58 be very careful as the market is full of cheap and nasty (but convincing) chinese copies.

Hamster

Link to comment
Share on other sites

[quote name='bass_ferret' post='149489' date='Mar 1 2008, 03:42 PM']Why use a cheap knock off and keep the real thing as a back-up?[/quote]
The SM58 is my mic I used in the 80s, and the Behringers are band-owned. There isn't a lot of difference in the sound or performance although the behringers seem to have more output , so require slightly less gain on the PA input.

Link to comment
Share on other sites

[quote name='bass_ferret' post='149365' date='Mar 1 2008, 10:48 AM']Unless you have got a PA at home how are you gonna try it out? You cant plug a mike into you bass amp. If you want to try it out at rehersal then see if you can hire one from your local PA hire.[/quote]

Guitar amp.

Link to comment
Share on other sites

[quote name='Jamesemt' post='149359' date='Mar 1 2008, 10:30 AM']I understand what you are saying about the Shure, but what if me singing doesn't work? It's only a thought at the moment (having NEVER done it before...)[/quote]

There's another eeason to buy a used SM58 - if it doesn't work out you'll get your money back no bother. Doubt there's many mics about you could say that for.

If you do buy used - unscrew the pop shield - rinse out the bit of foam in hot water and mild disinfectant , chuck the pop shield in the same brew then scrub it with listerine. Don't buy silly specialist mic cleaning products - use what's under the sink or in your bathroom. Do make sure the foam's dry before you screw it all back up.

I had an expensive AKG. It went in the theft 2 years ago and scrambling round to put enough kit together for the next gig I bought a cheap AKG (about £60 new) for £25 used. Still using it - it's great. Can't for the life of me remember either mic model numbers. I'm anoraky enough about basses to start on something else!!

Link to comment
Share on other sites

[quote name='Jamesemt' post='149359' date='Mar 1 2008, 10:30 AM']I understand what you are saying about the Shure, but what if me singing doesn't work? It's only a thought at the moment (having NEVER done it before...)[/quote]

There's another eeason to buy a used SM58 - if it doesn't work out you'll get your money back no bother. Doubt there's many mics about you could say that for.

If you do buy used - unscrew the pop shield - rinse out the bit of foam in hot water and mild disinfectant , chuck the pop shield in the same brew then scrub it with listerine. Don't buy silly specialist mic cleaning products - use what's under the sink or in your bathroom. Do make sure the foam's dry before you screw it all back up.

I had an expensive AKG. It went in the theft 2 years ago and scrambling round to put enough kit together for the next gig I bought a cheap AKG (about £60 new) for £25 used. Still using it - it's great. Can't for the life of me remember either mic model numbers. I'm anoraky enough about basses to start on something else!!

Link to comment
Share on other sites

I am With the Sm58 or Beta57, it will last a lifetime.
If you want to go cheaper try,
[url="http://www.red5audio.com/"]http://www.red5audio.com/[/url]
They have microphones from 25 pound.
I have used there drum and valve mic.s good quality and sound far more expensive then the price suggests.

If you want to upgrade it will do as a spare.

Link to comment
Share on other sites

[quote name='bass_ferret' post='149365' date='Mar 1 2008, 10:48 AM']Unless you have got a PA at home how are you gonna try it out? You cant plug a mike into you bass amp. If you want to try it out at rehersal then see if you can hire one from your local PA hire.[/quote]

[quote name='Jamesemt' post='149713' date='Mar 2 2008, 08:52 AM']Guitar amp.[/quote]
So how are you going to plug a low impedence mike with cannon 3 pin connector into your guitar amp?

Link to comment
Share on other sites

[quote name='bass_ferret' post='149852' date='Mar 2 2008, 02:57 PM']So how are you going to plug a low impedence mike with cannon 3 pin connector into your guitar amp?[/quote]

An [url="http://www.maplin.co.uk/Module.aspx?ModuleNo=12151&&source=14&doy=2m3"]impedance matching transformer[/url] should be the cheapest way of doing the job.


mic -> xlr mic cable -> impedance matching transformer -> short 1/4" socket to 1/4" jack extension cable* -> amp

[i]*The extension cable is optional and is to prevent mechanical strain on the amp input socket due to the weight & chunkiness of the transformer.[/i]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...