-
Posts
1,733 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Status Updates posted by Pow_22
-
Been reading *LOTS* recently about a very certain driven type P bass sound ive been chasing for a while…now i really want to try out a Markbass R500
-
So....i ordered the Ric from Bass Bros....
-
Do i NEED the rickenbacker 4003 ive seen online and cant stop thinking about?!?
-
If im looking at an old 70's valve amp and it doesnt have a DI Out im sure ive read somewhere you can get a stand alone DI that goes in between the speaker out lead and the cab or am i completely making that up?
-
Yup, not in series with the cabinet, but can be connected in parallel or daisy chained with the cabinet. There's several on the market and, even Darkglass' Element pedal can be used as one (up to 100W) - meaning that you can even install a cabinet emulation (along with EQ and a whole host of other parameters) post amp to then feed off to your recording device or PA system. It's not a dummy load though, so this one will still need a cabinet attached. Dummy loads do exist too, I reviewed the Sequis Element: https://www.bassgearmag.com/bassic-review-sequis-motherload-elemental/ and Darkglass Element a while back:
-
I've used a Palmer "The Junction" PDI 09 for years for this and have had good results. Really does sound like a mic'd amp IMO and one gets the power tube character in addition the the preamp tone. Solid piece and I like that it's passive. It does have several attenuation settings and ground lift, if needed. As with the Darkglass (have not used it but would like to try it) it's limited to 100w (I've used with '64 Dynacord Bass-King and Ashdown Little Stubby). As Dood says, it still has to be used with a cab as it does not have power soak/dummy load function (Palmer and many others make those).
-
I've used one of these:
https://www.canford.co.uk/Products/21250/20-031_EMO-E520-DI-BOX-Passive-1-channel-with-earth-lift
Rock solid construction, but absolutely no frills, amp sims or anything
-
-
Anyone here snag that EBS T90 valve amp that was on ebay recently? Fingered hovered over the BIN button several times!
-
Incoming - Schecter Model P bass as backup to my P in the busy gigging period up to christmas
-
Finally bagged an Ashdown LB 30, cant wait to get back to an all valve rig
-
Time to simplify my set up. No more pedals (except a tuner), no more pre amps, no more compressors, no more drive.... just a p bass, valves and cab
-
-
-
@Reggaebass that's exactly it, I need to stop knob twiddling (ooooh matron) and just play the damn thing
-
-
The early Italian Markbass R500s - are they class D or class A/B? Mixed messages online from they ARE class D, they ARENT class D to early ones weren't but later ones are!?!?!
-
I can think of a couple of Markbass models that transitioned from A/B to D Class and the interwebz suggests that happened around 2012, so I wouldn't rule out that if the R500 was in production then it *could* have been included. Again the internet suggests that R500 production ended by 2012, I'd wonder if it remained A/B until being phased out.
-
Oh and, if it's an early R500, then yes it will have been A/B. - The manual describes the power section as 'analog' which is typical of describing A/B class and for a 500W amp, it's heavier than it's D Class variants, so, all in all, I think it's probably safe to assume an early model is A/B. Lifting the lid on it will also prove it.
-
-
Anyone recommended an attenuator for the DI on an Orange Bass Terror? I believe the one i need is -40db to fix the 'Hot DI' isues?
-
Bought a B stock Vintera II P bass recently in a lovely burst/tort/slab rosewood but after being a Jazz bass player for so long I'm really struggling with the neck. Maybe time to sell and go for a Hama Okomoto P Bass!
-
Are we allowed to discuss rickenbackers on this forum now? Ive seen a used vintage one but have a few concerns id like to run by someone more experienced than me
-
Sorry all for the long absence, life threw a curve ball. Back and good now tho so will get through my notifications and PMs over the next day or two. Good to be back! :)
-
This weeks GAS - EBS T-90 valve amp
-
When your For Sale gear isnt shifting and you have your eyes on a stunning p bass
-
Getting really quite bad GAS for a fireglo Ric bass. Never really played one and dont know where this latest want has come from!?!
-
-
-
Who knows where GAS comes from? But it does always seem to strike.... at some point.
As mentioned above, try a couple if you can. There are always a few on eBay, and some on here too. Keep an eye out for next time one comes up near you, or ask a friendly nearby fellow BC member if you can try theirs? Rics have their fans and their detractors - but a good one is a great bass.
-
-
Never really got on with Barefaced cabs but a gen1 Compact has come up locally...hmmmm....
-
Mosfet Bass Drive incoming. Looking for an 'always on' gritty tone rather than distortion so could be interesting!
-
Anyone know how to get a previously locked for sale thread re-opened? I withdrew my P bass but something has come up that means i want to advertise it again
-
Suddenly and randomly got massive Rickenbacker GAS!
-
Took my Orange Terror Bass MK1 to rehearsal last night to be met with the studios in house Ampeg fridge. Excitedly plugged in.......pure mud
Ordered some rounds to help (this band doesnt suit my usual flats) and may look at valve changes in the OBT. Very disappointed
-
I had the original MK1 amp for around 12 years, then all of a sudden I stopped liking the sound of it. It also sounded very muddy, even with new strings, treble turned up etc etc. Not sure if the amp had changed, or just my ears/tastes changed but I ended up selling it.
I then ordered one of the new MK2 amps, and I didn't like that either so it went back.
I still have the SP212 cab, but bought an Alpha Omega 500 head to go with it
-
-
Hopefully this will help https://www.talkbass.com/threads/orange-terror-500-bass-eq.1417858/
-

