monkeynuts

** Bump ** Reduced to £840

Bump

Bump Reduced to £890 ** Flight case no longer included **

Bump

Small wheeled flight case for sale, perfect condition Has retractable handle and wheels for moving 36cm High x 42cm Long 33cm Deep

Up for sale (No trades) is my Fender standard American Jazz in Olympic White/Rosewood. Obviously the best colour combo but then I'm biased!!! It's been in my possession since new and is a 2011/12 model complete with hard case. It's in excellent condition as has been lovingly cared for, hardly any buckle rash on the back as I hope the photos show. One small ding on the headstock from an over zealous drummer! Shown in pictures. Based in Stevenage, Herts but frequent travel means meet ups are possible. Any questions just ask away :-)

Bump

Bump

Hi, I'm based in Stevenage, Herts. Thanks

Hi, I'm based in Stevenage, Herts

Full band PA up for sale, any tests welcomed. Would be tricky to ship so more than happy to meet within reason. I have plenty of pictures I can email across as hit my upload limits. [u][b]2 x Speaker Stands[/b][/u] Both speakers stand in pretty good condition, no major wear and tear [u][b]1 x Shure SM58 Vocal Mic[/b][/u] Vocal mic has unfortunately been dropped a few years ago so there is a dent in the cover, this hasn't affected its performance or reliability though. Always been kept in its soft case and transported and stored in the flight case [u][b]1 x Quicklok Mic Stand[/b][/u] A few scratches and scuffs on the stand but is still in excellent working order [u][b]1 x LD Systems LAX8D Mixer[/b][/u] The mixer has a few issues so I have reduced the overall price to almost give this away. It works fine however the effects dial has snapped so you cannot change the effect and the power connector on the PSU is damaged (common fault). It still powers up and everything else works perfectly. [u][b]1 x Flight case for Mixer, Mic and Cables (Power cables in separate bag)[/b][/u] Good condition, has wheels and a retractable handle for moving [u][b]All required XLR / Jack to Jack leads[/b][/u] Assorted colored leads to identify connections quickly [u][b]3 X JBL 515XT Speakers[/b][/u] They were purchased about 2.5 years ago and have probably done 20 shows max. They were not used on rehearsals or pub gigs (Alto's used then) just Weddings,functions etc. They were £360 Each new. 2 have been used as main PA speakers and one as a monitor, this was to give backup should we have a main speaker failure (thankfully never happened) the monitor can be reassigned to a main with no loss of quality or performance. They have only ever had vocals through them and recorded break music, not a full mic'd up band. So have been worked well within their limits. Always transported in their original boxes so scratches have been kept to a minimum. IMO great sounding speakers however I know how subjective that can be! Full manufacturer details below; [font=arial,helvetica,sans-serif][i]OVERVIEW [/i][/font] [font=arial,helvetica,sans-serif][i]WIth the EON 515XT, JBL has extended the reach of the current EON technology by improving input sensitivity, lowering the noise floor, adding user selectable EQ control and re-voicing the system for peak performance and enhanced audio precision. The intuitive onboard 3-channel mixer with adjustable EQ assures that you're in control of the sound and the sturdy construction and superior ergonomic design will guarantee a lifetime of reliability and simplicity. Put it all together and the EON 515XT is the toughest, smartest and most impressive EON ever.[/i][/font] [font=arial,helvetica,sans-serif][i]The EON 515XT's onboard mixer is perfectly suited to accommodate multiple input sources simultaneously. With 2 1/4"" TRS Phone jacks and 1 Neutrix combination jack that accepts an XLR or 1/4" TRS Phone plug, the mixer is capable of blending 3 discrete sources like a stereo keyboard and microphone or a CD/MP3 player and a microphone. The EON 515XT features a loop-through for routing the signal to another destination like an additional EON powered speaker, a recording device, or another mixer. With its global Bass and Treble controls, you can also tailor the sound to fit your unique needs.[/i][/font] [font=arial,helvetica,sans-serif][i]EON 515XT represents the natural evolution of a product whose creators have been advancing the state of the art in professional audio for more than 60 years. With close to 1 million EON speakers in the world, it's safe to say it's a name you can trust.[/i][/font] [font=arial,helvetica,sans-serif][i]Features[/i][/font] [font=arial,helvetica,sans-serif][i]Intuitive onboard 3-channel mixer[/i][/font] [font=arial,helvetica,sans-serif][i]User adjustable Bass and Treble controls[/i][/font] [font=arial,helvetica,sans-serif][i]Efficient Crown Class-D amplifier technology[/i][/font] [font=arial,helvetica,sans-serif][i]625W high-performance powered speaker system[/i][/font] [font=arial,helvetica,sans-serif][i]True portability[/i][/font] [font=arial,helvetica,sans-serif][i]Multiple handles with comfort rubber grips for easy transport[/i][/font] [font=arial,helvetica,sans-serif][i]Highly designed composite enclosures for durability, lightweight, and precise acoustic performance[/i][/font] [font=arial,helvetica,sans-serif][i]Multi-angle enclosure for main PA or floor monitor applications[/i][/font] [font=arial,helvetica,sans-serif][i]Integrated 36mm polemount socket with stabilizing securing screw[/i][/font] [font=arial,helvetica,sans-serif][i]Integrated M10 suspension points for easy fixed installation[/i][/font] [font=arial,helvetica,sans-serif][i]100 H x 60 V asymmetrical wave guide for uniform audience coverage[/i][/font] [font=arial,helvetica,sans-serif][i]15" differential drive low-frequency driver with neodymium magnet for low-distortion and lighter weight[/i][/font] [font=arial,helvetica,sans-serif][i]1" throat diameter next generation JBL neodymium compression driver[/i][/font] [font=arial,helvetica,sans-serif][i]Line level and direct microphone input capability[/i][/font] [font=arial,helvetica,sans-serif][i]Unique Mix/Loop signal flow function for extended system application[/i][/font] [font=arial,helvetica,sans-serif][i]Easy daisy-chain connections for extending the system[/i][/font] [font=arial,helvetica,sans-serif][i]Applications[/i][/font] [font=arial,helvetica,sans-serif][i]Live sound reinforcement for speech and vocals (presenters, singers, or entertainers, and teachers)[/i][/font] [font=arial,helvetica,sans-serif][i]Music playback for entertainment, A/V, and, institutional venues (DJ's, A/V rental companies, houses of worship, nightclubs, or social organizations)[/i][/font] [font=arial,helvetica,sans-serif][i]Amplification for musical instruments (electronic keyboards, acoustic guitars and basses, brass and woodwinds, percussion)[/i][/font] [font=arial,helvetica,sans-serif][i]SPECIFICATIONS [/i][/font] [font=arial,helvetica,sans-serif][i]System Spec:[/i][/font] [font=arial,helvetica,sans-serif][i]System Type: Self powered 15", two-way, bass-reflex[/i][/font] [font=arial,helvetica,sans-serif][i]Maximum SPL Output: 132db[/i][/font] [font=arial,helvetica,sans-serif][i]Frequency Range (-10dB): 39-20KHz[/i][/font] [font=arial,helvetica,sans-serif][i]Frequency response (±3dB): 42-18KHz[/i][/font] [font=arial,helvetica,sans-serif][i]Input Connectors: 2 x 1/4" Phone jacks bal./unbalanced 1 x XLR / 1/4 inch combo jack with XLR loop through[/i][/font] [font=arial,helvetica,sans-serif][i]Input Impedance: 14K[/i][/font] [font=arial,helvetica,sans-serif][i]Signal indicators:[/i][/font] [font=arial,helvetica,sans-serif][i]Limit: Red LED indicates limiter active condition[/i][/font] [font=arial,helvetica,sans-serif][i]Signal: Green LED indicates signal present[/i][/font] [font=arial,helvetica,sans-serif][i]Mic: Indicates the MIC/Line switch is in the "MIC" position[/i][/font] [font=arial,helvetica,sans-serif][i]EQ: Individual Bass and Treble controls, center detent, ±6db cut and boost[/i][/font] [font=arial,helvetica,sans-serif][i]Bass ± 6dB (200Hz turnover frequency)[/i][/font] [font=arial,helvetica,sans-serif][i]Treble ± 6dB (4 KHz turnover frequency)[/i][/font] [font=arial,helvetica,sans-serif][i]Mic Input Gain: -Infinity to +40dBu[/i][/font] [font=arial,helvetica,sans-serif][i]Line Input Gain: -Infinity to +4dBu (+18dBu maximum input level)[/i][/font] [font=arial,helvetica,sans-serif][i]Limiter: Yes[/i][/font] [font=arial,helvetica,sans-serif][i]Amplifier Design:Crown Class D[/i][/font] [font=arial,helvetica,sans-serif][i]System Power Rating: 625 W (525 + 100)[/i][/font] [font=arial,helvetica,sans-serif][i]Speaker Spec:[/i][/font] [font=arial,helvetica,sans-serif][i]LF Driver: 1 x JBL 265F-1 380mm (15") Differential Drive integrated woofer with dual 2" voice coils[/i][/font] [font=arial,helvetica,sans-serif][i]HF Driver: 1 x JBL 2414H 37.5mm (1.5") annular polymer diaphragm, neodymium compression driver[/i][/font] [font=arial,helvetica,sans-serif][i]Coverage Pattern: 100 x 60 nominal[/i][/font] [font=arial,helvetica,sans-serif][i]Crossover Frequency: 1.7KkHz[/i][/font] [font=arial,helvetica,sans-serif][i]Enclosure: Polypropylene, multi-purpose main & monitor[/i][/font] [font=arial,helvetica,sans-serif][i]Suspension/ Mounting: 36mm pole socket with stabilizing screw, 5 x M10 suspension points[/i][/font] [font=arial,helvetica,sans-serif][i]Handles: One left/right side, one on top, with rubber grip[/i][/font] [font=arial,helvetica,sans-serif][i]Finish: Black Polypropylene[/i][/font] [font=arial,helvetica,sans-serif][i]Grille: Powder coated perforated steel with acoustically transparent screen backing[/i][/font] [font=arial,helvetica,sans-serif][i]Dimensions (HxWxD): 673mm x 406mm x 368mm (26.5" x 16" x 14.5")[/i][/font] [font=arial,helvetica,sans-serif][i]Gross Weight: 24.2kg (53.5lb.)[/i][/font] [color=#333333][font=Arial, Helvetica,] [size=5] [/size] [/font][/color]

More lights for sale! These are my Equinox Maxi Bar Lights. Bought for £449 from new about 3 years ago, they have been used but well looked after as you can see from the pictures. There is one slightly bent out of shape light holder from when an over enthusiastic pup goer knocked them over. This doesn't affect them at all and function perfectly, damaged occurred about 2 years ago and there have been no after effects from it. Light bars come in their own hard carry cases, complete with manuals. There is also the footswitch controller and cable and I'll also add my DMX cable in to link the two bars together. The stands do need some attention though, they are use able (just) but do need some running repairs. Awesome lights for a band, no heat, foot controlled for multiple settings from slow fades, preset patterns to full on sound to light. Not sure on shipping costs on these as they are quite big and bulky so we can work that out, or more than happy to meet within a reasonable distance. [color=#444444][b]Equinox Maxi Bar Features:[/b][/color][list] [*]Equinox maxi Bar has DMX channels: 6, 9, and 15 selectable [*]LEDs: 432 Ultra Bright 10mm LEDs (R: 144, G: 144, B: 144) [*]Individual tilt & swivel on each panel [*]Beam angle: 30 degrees [*]3-Pin XLR in/out sockets [*]IEC power in/out sockets [*]5-Pin socket for foot controller [*]Slimline design [*]Linkable - connect multiple kits to one controller [*]Height adjustable stand [*]All metal design [*]Ultra low heat output [*]No duty cycle [/list]

[color=#000000] The pair of lights are used but in good condition, one of the motors is slightly noisy but still functions perfectly.[/color] [color=#000000] Power cables were extended for light locations when set up, these can easily be returned to factory.[/color] [color=#000000] Manufacturers blurb;[/color] [list] [*][color=#111111]Led moonflower with sharp white beams utilizing one 3w led[/color] [*][color=#111111]Effect switch: beams slowly rotate or are static[/color] [*][color=#111111]Produces led patterns that can be projected on a dance floor or wall[/color] [*][color=#111111]Wide beam spread covers a large area[/color] [*][color=#111111]Extreme long lifetime of the leds (100000 hour rating)[/color] [/list]

Starville SH-150 Hazer complete with remote control for timed haze. Also will come with approx 3l of fluid. This is a Hazer not a smoke machine so gives a nice fine haze to add atmosphere and really brings any lighting effect you have to life.

Up for sale are my two American DJ Quad Phase LED Lighting units Both are in excellent condition, always been kept in the original boxes for transportation and storage. They will come complete with power cables and the UC3 remote control unit. Purchased from Thomman 2 years ago at 178 Euro each. You Tube link (Not these lights but the same models and controller for context) - [url="https://www.youtube.com/watch?v=jpNPkASytig"]https://www.youtube....h?v=jpNPkASytig[/url] Manufacturer blurb below; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ [color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]American DJ's Quad Phase is designed to fill a room and dazzle a crowd with it's 160 razor-sharp beams of light. This technologically advanced moonflower features a homogenized 10W 4-in-1 quad color LED source (RGBW). Offering twice as many majestic colors as a TRI LED, the Quad Phase produces up to thirteen colors in all. The Quad Phase also offers all the latest features sought after in special effects lights such as: DMX-512 for programming or linking capabilities, exciting built-in sound active programs, no duty cycle (run all night), a long-life LED source (30,000 hours), 4-button DMX display on rear (for easier programmability), IEC power daisy-chaining, a 1.8 steeper motor for smooth movement, and is compatible with ADJ's UC3 easy-to-use mini controller (sold separately).[/size][/font][/color] [color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][size=5][b]FEATURES[/b][/size][/size][/font][/color][list] [*]High-output moonflower effect with revolutionary 10W Quad-Color LED 4-in-1 (Red, Green, Blue, White) technology produces color-changing beams of LED light [*]Produces 13 Colors: Red, Blue, Green, Purple, Yellow, Cyan, White, Light Red, Light Blue, Light Green, Light Purple, Light Yellow, Light Cyan [*]160 razor sharp beams fill a dance floor, ceiling, or wall [*]Using a 1.8 long-life stepper motor technology it can produce quick accurate movement or smooth fluid move movements for mood music [*]4 DMX Channels (Color, Rotation, Strobe, Dimmer) [*]Operation modes: Sound Active, Master/Slave or DMX-512 [*]Exciting built-in programs (Sound Active & Master/Slave modes) [*]Linkable via 3-pin XLR cable [*]4-button DMX display on rear panel [*]Beam Angle: 65 [*]Rich, saturated colors that will not fade [*]Low heat output [*]Runs extremely cool with no duty cycles so you can run all night [*]Compatible with the UC3 easy-to-use controller (sold separately) [*]IEC IN/OUT on rear to daisy chain power (up to 12 Quad Phase) [/list]

Shure SM58 Vocal Mic up for sale

Sold

Bump

Bump

Sold

Sold pending payment

TC Electronics Polytune up for sale. Full working order, a few scratches and two of the rubber feet missing. Based in North Herts, any questions just ask :-) Thanks [attachment=230034:IMG_0445.JPG] [attachment=230035:IMG_0446.JPG]

For sale is my EBS ProLine 4 x 10 cabinet, really dont need to go into details as I'm sure everyone already knows how good they sound. This is a 4 Ohm cab in excellent condition and complete with Roqsolid fitted case and trolley (if wanted). The trolley was welded up specifilcally for my old trace cabs so is slightly small for this but has done a great job for the last few years. Based in North Herts, any test welcome. Can meet within a reasonable distance and also look at postage if required but not sure how viable that would be. Thanks [attachment=230030:IMG_0438.JPG] [attachment=230031:IMG_0439.JPG] [attachment=230032:IMG_0441.JPG] [attachment=230033:IMG_0444.JPG]