Jump to content

dave_says

⭐Supporting Member⭐
  • Posts

    24
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

dave_says's Achievements

Rookie

Rookie (2/14)

7

Total Watts

  1. Hi Amvs, Thanks for the comment, sorry the cab still has a sale pending. I'll keep you posted if anything changes. Dave.
  2. Hi all! PRICE DROP £110 Fender Rumble 100W V3 for sale. Great little practice amp, I bought this new back in 2018 and have only ever used in home bedroom. Item is located in Chelmsford, Essex and ideally looking for collection, though willing to meet halfway for delivery depending on distance. Thanks for stopping by! Electronics Voltage: 240V Wattage: 100 Watts @ 8 Ohms Effects Loop: 1/4" - (Send/Return) Inputs: One - 1/4" Auxiliary Input: 1/8" Stereo Line Out: One - (XLR with Ground Lift) Hardware Amplifier Depth: 14" (35.56 cm) Amplifier Width: 16.5" (41.91 cm) Amplifier Height: 18.5" (46.99 cm) Amplifier Weight: 22 lbs. (9.97 kg)
  3. Hi all! PRICE DROP £270 Genz Benz NeoX 212T looking for a new home. Bought off here in 2020 from MuddBass, who I believe has had it from new and has treated very lovingly. Thanks to COVID I've taken it to TWO rehearsals over the past year and a half or so, so condition is still great. An absolutely fantastic sounding speaker and very mobile with the castors. Item is located in Chelmsford, Essex and ideally looking for collection, though willing to meet halfway for delivery depending on distance. Thanks for stopping by! SPECIFICATIONS 600 watt, 4Ω 2 x 12" + tweeter 42hz - 18khz sensitivity 101db 1w/m 47lb/23kg 1" x 21 1/4 " x 16 1/2"/ 78.8cm x 54cm x 42cm
  4. Hi all! PRICE DROP £100 I've had this monster from new since 2007 and its been gigged and practiced with quite a bit. The cab is in perfect working order, but does have a few scuffs on the top and sides (see attached pics). I've got far too much gear and a wedding coming up so need to part way with this. TBH price is negotiable as I really just need to clear the space. Item is located in Chelmsford, Essex, though always willing to meet buyer halfway depending on distance. Thanks for looking. TECHNICAL SPECIFICATIONS: B410HLF TYPE: 4x10” Bass Enclosure 4x10” FREQ: RESPONSE (+/-3dB) 50Hz – 18kHz USABLE LOW FREQ: (-10dB) 36Hz POWER HANDLING: 400W RMS IMPEDANCE: 4 ohms SENSITIVITY: 99dB SPL 1w/1m MAXIMUM SPL: 125dB COMPONENTS: 4-10” Special Design LF Speakers, 1” diaphragm HF Horn DIMENSIONS (H x W x D): 25.75” x 22.75” x 17.5” WEIGHT: 90 lbs.
  5. Hi again guys, one problem solved following your guidance, and now onto the next one. I've replaced the existing neck with a new neck, where the fretboard doesn't extend beyond the bottom of the neck, unlike the previous neck. Now I have an issue where I have a gap between the scratchplate and bottom of the fretboard and am struggling to find a scratchplate online that will fit. Has anyone got any experience with this? Before anyone says I definitely don't have the ability to knock up a decent scratchplate myself haha! Thanks, Dave.
  6. Yeah spraying inside my garage, have been keeping the door open whist drying. Should I be keeping the door to the garage closed? The garage is fairly cool inside.
  7. Apologies for picture quality, really bright sun in the garage atm! Can take better if needed
  8. Hi there, I hope this is the correct place to post this. I'm trying to redecorate the body of a bass, and have encountered an issue spraying the gloss varnish. I'm using the https://www.google.com/amp/s/www.northwestguitars.co.uk/amp/clear-gloss-nitrocellulose-guitar-paint-lacquer-aerosol-400ml/ to varnish the body, I've previously used a couple cans of a cheaper gloss varnish from hobbycraft and am getting these streaks appearing when I spray the varnish. When I spray the varnish initially you can see the actual paintwork underneath, but as the varnish dries these matt looking stains appear. Can anybody offer any assistance as to what I'm doing wrong? Thanks in advance, Dave.
  9. Thanks for your advice all! Am currently testing your suggestions.
  10. Hi, I'm sure that this has been asked a thousand times over. I've recently started to trying to record more seriously, but am struggling with hiss in the audio, and I was hoping for some advice before blowing my rent money on unnecessary purchases! Current recording set up is as follows Musicman Stingray -> Gallien Krueger MB Fusion 500 -> Direct Out via XLR to 1/4" jack Behringer U-Phoria UMC204HD -> USB -> Macbook Air I've tried recording with and without the ground lift to no discernible difference. Any suggestions? Thanks!
  11. I bought a Genz Benz 212 cab from Greg, he was welcoming, knowledgeable and a pleasure to talk to, and he made me a cup of tea! Highly recommended. Thanks again Greg!
  12. Hey all, I've had this head for about 3 years now, it's had a fair bit of use but mostly sitting around clogging up space. Selling due to downsizing of my rig. Am located in Chelmsford, Essex. As far as I can tell it's in perfect working order, minus the knob on the valve drive pot fell off and rolled under something a long time ago, lost into eternity. But yeah, you plug a bass and a speaker in and sound comes out. £200 ONO gents if you would be so kind. I was going to provide a link to the the Ashdown site, but they're on an EVO III now, which I can't honestly tell the difference between. Maybe it updates your Twitter account as you're playing. Thanks for your time, Dave
  13. The cab is 8ohm version I think. I am in Chelmsford, Essex. Willing to ship, however depends where to!
  14. Hi all, I haven't bought or sold anything off of here for ages so please be gentle as I'm a bit rusty! I desperately need to offload these two buggers to clear space in the house, or I'm a dead man. I want £300 for both of them together. I specify together because I really, really need them gone ASAP. Sorry if that's a problem, but Hell the Alan Sugar's of you all could probably sell them seperately for way more than that! I've had them both a while and the cab is a little bit scuffed in places but they are both otherwise fine. The footswitch is included for the Ampeg as is the flightcase it's pictured in, along with a soft-cover for the cab. I can provide more pictures on demand. Naturally. Thanks in advance, all. Dave.
×
×
  • Create New...