Jump to content
Why become a member? ×

bassace97

⭐Supporting Member⭐
  • Posts

    55
  • Joined

  • Last visited

Everything posted by bassace97

  1. Blimey! Good job I got mine when I did! I just pre-ordered a 210 and 115 from there, need to move on my Aguilar kit first!
  2. Played the Purple Turtle in Reading on Monday, used a pair of SL112 cabs and a Mesa TT800 head. Sounded huge!
  3. https://www.kemper-amps.com/products/uk/profiler-player.html Curious how this stacks up against the HX Stomp/XL. Not a bad price at £499 either.
  4. I'll come - Will bring My Musicman stingry basses, Fender Mustang bass, Pedalboard and my Mesa TT800 + SL112 cabs
  5. Despite all the reports of the failures it's a very small number that actually fail - there are plenty of these in touring use that take a lot of abuse that are over 10 years old now and absolutely fine - If you got one new now I think you'd be fine.
  6. So it seems to me there are two separate common problems with these compressors: 1. Failed output TLC2262 Op amp. Symptoms are the pedal looks to be working correctly with the gain reduction LEDs working, but with no output when the pedal is engaged. fixed just by swapping the output op amp normally, tricky without SMD soldering equipment but doable. 2. Failed ratio switch. All gain LEDs stay on permanently instead of going off after a few seconds of turning on. Fixed by replacing the ratio switch as mentioned by @fretbass.
  7. Thanks for this! Just did this fix myself - bought one off ebay and swapped the chip for another TLC2262. A question for those that went the AD822 route: Did this different chip make any difference to the sound or characteristics of the compressor?
  8. Excellent amps, love mine! Where did you get it from? Hoping to pick up a matching 210 and 115 to complete my rig!
  9. Usual rig for tonights rehearsal - Fender 60s Jazz Bass -> Pedalboard -> Mesa TT800 + 2 Aguilar SL112 cabs.
  10. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  11. How do you find the Rm800 II ? considering getting one as a backup head.
  12. Hadnt considered white, bet that looks stunning! This one is a 2008 Made in Japan, and from what I can see these all came with a black Fender hardcase. A fellow basschatter actually offered me a set of Labella Mustang strings, can't wait for them to arrive. I'm considering swapping the stock pickup for a Nordstrand NM4, DO you have any experience with these?
  13. Tonights practice setup - used a Fender Mustang Bass on its debut with the band - cab wasn’t that great imo
  14. Liking it so far. Really nice warm round sound. Considering putting flats on it. Any suggestions will be greatly appreciated.
  15. What is the tone like compared to an SVT? I see these come up from time to time and I've always been intrigued by them. Don't see many big bands using these, the only one I can think of off the top of my head is Doves.
  16. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  17. Last nights rehearsal setup - used the TT800 through an ABM 410 cab - sounded huge!
  18. On my SVT-CL I run the gain at noon and adjust the master to taste. I have heard using the master maxed and using the gain for final volume makes it sound more like the original SVTs though, will have to try that next time I take it out.
  19. Wish I still had my terror bass - warmest sounding class D amp imo!
×
×
  • Create New...