slaphappygarry

First Day of Finnishing (after 3 coats of stain and 1 coat of oil/stain mixture): These were all taken when it was still a little soft (found out the hard way when removing the neck again ). It was a 90/10 Mix oil to wood stain and was applied with a cloth. G

Sanding Finnished: G

Day two of sanding. By this point i had gone through twice as much sand paper as i had intended. The laquer was really thick. The horns are also getting there but will require another hours work to get them perfect: And the back is still a long way off (actually lost patience today and drew a picture on it, seemed a pretty good time to stop that day): G

After day 1 of sanding: The horns were sanded usins a dowel with sand paper taped to it. Its like an uber fine file: G

This is a thread carried over from the old forum. Its a build diary of my Fender Geddy Lee bass and what i did to it. This is how it started: I stripped the Bass down into all its seperate parts before sanding the body. This also shows how it all started out: The Body: And some of the bass.... as it was originaly: G

You can use the attachment system. You will have 25mb of space for uploading images by default, but if you sell a lot of gear and are running out, get in touch with an admin and we can increase that limit for you. It'd be nice to avoid deleting uploads so we don't have loads of dead images everywhere. Quick tip: Don't upload big images or you'll run out of space pretty quickly! Compress them and resize them sensibly, like you would with the

Here we are then Woop woop