Jump to content
Why become a member? ×

Chewie

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    579

  • Joined

  • Last visited

 Content Type 

Posts posted by Chewie

    Squier CV Jazz Bass with GOTOH nickel tuners & BADASS II Bridge. Parts....?

    in Basses For Sale

    Posted

    25 minutes ago, jezzaboy said:

    Hey @Chewie. Slightly off topic but how did you get the finish to look like that? It looks exc.

    Hey Jezzaboy,

     

    Thanks man…. I used contour sanding pads from Toolstation and fitted em to my electric sander.  I used a T cut to polish it after a bit of 400 @ 600 wet and dry.

     

    I think I’ve got it licked now…..

    Contemplating my 2006 next…..

     

     

    IMG_0626.jpeg

    IMG_0627.jpeg

    • Like 1

    Squier CV Jazz Bass with GOTOH nickel tuners & BADASS II Bridge. Parts....?

    in Basses For Sale

    Posted · Edited by Chewie

    Hello Groovers,

    Here's my CV Jazz for your perusal.

    Great bass; especially for the money.   Lively, growly beast.

    Comes with Badass II and GOTOH aged tuners.

    Original tuners will come in the sale too.

    I've taken the poly finish back to a lovely, warm, nitro kind of look.  It looks fantastic IMO.

    The pickup cover isn't in the sale.  it's placed in position for no reason at all.

    The bass comes with it's original black pickguard.

    Collection preferred.

    I'll put more photos up tomorrow when the sun is out..... 

    Thanks for looking.

    IMG_0606.jpeg

    IMG_9658.jpeg

    IMG_9643.jpeg

    IMG_0617.jpeg

    IMG_0618.jpeg

    IMG_0619.jpeg

    IMG_0620.jpeg

    IMG_0622.jpeg

    IMG_0623.jpeg

    IMG_0624.jpeg

    IMG_0625.jpeg

    • Like 4

    Anybody used Lava Pickguards?

    in General Discussion

    Posted

    2 hours ago, Reggaebass said:

    Hi chewie, just a suggestion, assuming your looking for tort?, the pickguards on the 62 reissues are really nice, they aren’t red like a lot of them they are darker, I’ve got a pic if you need one 

    Hey Reggae,

    Yes please, buddy.

    I'm considering alsorts except Spirfire…..

    IMG_0382.jpeg

    • Like 1

    Shim for changing the neck angle slightly.......

    in Repairs and Technical

    Posted

    5 hours ago, Andyjr1515 said:

    Coincidentally, last night I took this neck off.  And that (it is veneer) is glued on and dated & monikered by the maker

    plm6LwZl.jpg

     

    Yup - recognise the laminations?

     

    The date, if you can't read it, is 1.9.79 

     

    DtSPmrMl.jpg

     

    As the saying goes, 'If it's good enough for Wal...'

     

    That’s certainly an endorsement….  Thanks for this……!

    • Like 1

    BadAss Bridges

    in Repairs and Technical

    Posted

    On 18/05/2007 at 11:36, BOD2 said:

    [b]BadAss Bridge[/b]

    The Leo Quan BadAss Bridge is a complete replacement bridge for Fender-type basses. Other replacement bridges are available (e.g. Hipshot, Schaller, Trevor Wilkinson, Gotoh etc.) but the BadAss seems to have become the accepted standard for Fender-type basses and is actually supplied by Fender on some models.

    The BadAss II is the most popular version, as this is a direct “bolt-on” replacement for Fender Jazz and Precision bridges (using the same 5 mounting holes as the original Fender bridge).

    [attachment=79:BadAssII.jpg]

    The BadAss III is similar to the BadAss II but is designed for Fender American Deluxe basses with through-body stringing and only 3 mounting screws. It features pre-slotted bridge pieces and extra holes in the bridge plate giving the option of either standard stringing or through-body stringing

    [attachment=80:BadAssIII.jpg]

    The BadAss V is a 5-string version of the BadAss II with 6 mounting holes.

    [attachment=82:badassV.jpg]

    The original BadAss (with no numbers after the name) is less common. It is not a direct replacement for Fender bridges as the different height of the bridge may require routing of the body in order to fit.

    [b]What Does It Do ? [/b]

    The BadAss bridge claims to improve tonal quality and sustain. This is achieved by the greater mass of the bridge body/bridge pieces and the through the high engineering quality of the design.

    [b]Where To Buy ? [/b]

    There are many suppliers of BadAss bridges. Do an online search to find a suitable dealer and to get an idea of prices. You can also find them on eBay.

    [b]Fitting A BadAss Bridge [/b]

    It is a very straightforward job to fit a BadAss II bridge to a Fender-style bass. Remove the strings, unscrew the old bridge, and then screw the BadAss in its place using the same screw holes (note that the BadAss II has 5 screw holes but the BadAss III has only 3 screw holes). Make sure everything is tight and ensure that the bridge earthing wire is correctly trapped between body and bridge plate.

    [b]Filing The Bridge Pieces on a BadAss II [/b]

    There is a lot of discussion about this. The BadAss II, as supplied, does not have string slots cut in the individual bridge pieces. This is to allow for the installer to adjust the string spacing to suit the player.

    The manufacturer recommends that string slots be filed into the bridge pieces during installation to avoid lateral movement of the strings while playing. This is not a difficult job but does require some basic skills, the appropriate tools, and some care.

    Many people use the bridge successfully without strings slots. Through time the strings will create their own slots, though not as deep as correctly filed ones.

    It seems that, provided your playing style is not overly aggressive, you can use the bridge without slots with no adverse effects.

    [b]Issues With String Action [/b]

    Due to the different design of the bridge, the amount of vertical travel of the individual bridge pieces is different to the Fender original. In particular, the BadAss bridge pieces cannot be adjusted quite as low as the Fender bridge pieces.

    In most cases this will not be a problem. Unless your original bridge pieces are set very low before the BadAss is fitted then you are not likely to be affected by this.

    If however, after fitting, it is found that you cannot adjust the action low enough then adjustment of the neck-to-body angle may be required.

    For Fender basses with a “micro-tilt” neck adjustment this is very easy and involves screwing IN the micro-tilt adjuster to move the neck headstock backwards.

    If the bass does not have a micro-tilt adjuster then the method of adjusting the neck is to add (or remove) “shims” to the neck pocket. This is still a potential DIY job, although it does require a little more skill.

    Remove the neck from the body, and then adjust the neck angle using very thin pieces of wood, card or plastic. Inserting a shim at the body end of the neck pocket will push the headstock back and lower the action. Inserting a shim at the neck end of the neck pocket will push the neck forward and raise the action.

    Before doing this I would suggest you do a Google search more detailed information about shim fitting.


    [b]Fitting A BadAss II to non-Fender Basses [/b]

    Remember that the BadAss II is designed as a replacement for Fender basses; it should fit most Fender-style basses without problems, although it is possible that the mounting screw holes may not be in exactly the right position. If necessary you can fill the original holes and drill new ones.

    For basses that are not Fender replicas check the dimensions of the bridge to ensure that it will not protrude beyond the back edge of the bass or foul the pickup when fitted.

    The BadAss II is a flat-top design so will not fit on bodies with a carved top without routing a flat area first.

    [b][i]Extra Information[/b][/i]

    [b]Fender Aerodyne Basses[/b] (thanks to "buzz")

    The Aerodyne jazz bass with the curved top, both the exported and non-export models have trouble with the bridge, this is due to the standard fender one sitting in a recess, and the badass being larger than it (the badass just sits over it and makes minimal contact)

    To get around this, either routing of the recess is required, or using a wooden/metal plate to fill the recess in, so the entirety of the new bridge makes contact.

    It's not just an bolt on job like on normal flat topped fenders.

    [b]Practical Tips [/b] (thanks to LFalex)

    I've just fitted a BadassII to my new Squier 70VM Jazz, and found the following points to be noteworthy when installing a Badass...

    * Protect the body of your bass with card or a duster etc. to prevent scratches.

    * Slacken your strings gently. I don't favour having all the strings off at once (I change them one at a time). For this job, it's a necessary evil.

    * Make sure all the holes line up on the bass / Badass.

    * Watch out for the screws supplied with the Badass. I found them rather "soft" and the heads began to burr as I screwed them in. I reverted to the original screws, and they seem fine, in spite of being a little shorter.

    *Make sure that you get a good contact with the bridge earthing lead, or hum and buzz may result (NOTE - to help with this splay out the individual wires of the earth wire, and roughen the underside of the bridge plate where the wire will contact with sandpaper/emery cloth)

    * IF you elect to file slots in the Badass II saddles (as I did), Please don't try and do it with the unit on the bass. It's a nightmare, as they bounce to and fro on the intonation springs. Bite the bullet and remove the saddles!

    To mark the slots, I put the bridge on the bass and put on the strings. I tuned it to the desired pitch (GDAE), positioned the strings as I wanted them, and marked either side of the string. This gives a bare patch on the saddle between two lines, showing where the groove should lie.

    Remove each saddle in turn. Clamp in a vice (ideally with wooden cheeks, so as not to damage the saddle)

    Start each groove with a hacksaw. It helps centre the file later and gives a nice, straight groove.

    Use appropriate files! Mine cost a whole £2.88 from B&Q for a set of six. I cut a V profile with the triangular thread file, and then rounded it out with the tip of a circular rat's tail file to give good string to saddle contact.

    I used an old set of 0.040 - 0.100 gauge strings to "offer up" to the grooves and decide when to stop cutting. I filed to a depth equal to half that of the relevant string's diameter in each case, so the strings sit nicely in the saddle.

    I put each saddle back and took off the next one, keeping the other 3 strings in tune to help the truss-rod out.

    * Keep your old bridge handy. It's useful to compare in order to establish roughly where the saddles should be for the correct action and intonation.
    Naturally this'll need further adjustment, but it's a start.

    * For those of you who like your intonation spot on, try using the harmonic note against the fretted note at the 19th fret. The pitch is higher so tuners pick it out more quickly and more accurately. This is a good one for anyone who uses chords or plays up at the "dusty end" of the fretboard.

    All of the above came from my first attempt at fitting a Badass II and filing slots in the saddles. They describe what I believe to be helpful practices drived from what I learned the hard way.

    * Tighten the screws that hold the bridge in place after a week. I got another 1/8 of a turn on all of them. Definitely felt and sounded better for it.
    Then I had to raise the action, as the whole bridge was now a fraction lower (but I do run the action insanely low in the first place.)

    OOOH..... I've got a II on a CV and I've not even heard of this slot thing..... thanks for this.

     

×
×
  • Create New...