sebowden

I've been using a rock-wire cable, but its only 2.5mm.... I'll upgrade at some point

Just plugged the SVT in for the first time. WOW. Cab works a charm, too. No distorting, but only got the volume to 9 O'clock so will see how it sounds at rehearsal tomorrow. Thanks for your help. Best birthday ever! I would obviously try the cab first! I'm usually a 15 inch cab guy - the 2x12 is like a middle ground to my ears, but only heard youtube demos.

Thanks for the help man! This diagram correct? [url="http://s711.photobucket.com/user/tubetime86/media/parallel.jpg.html"]http://s711.photobuc...rallel.jpg.html[/url] Re. the 2x12 - it actually looks to be a perfect cab for my needs. Not a huge fan of the peavey's sound, but it has served me very well.

[quote name='pete.young' timestamp='1482755906' post='3202525'] I would guess he is doing it because Ampeg don't recommend you use anything other than 4 or 2 ohm load and he doesn't want to buy another cab. [/quote] Correct. I'm saving for the 212AV though. Just need something for now. Will it lose power?

[quote name='Phil Starr' timestamp='1482744437' post='3202429'] If you don't need the horn then you could just disconnect it and the crossover. [/quote] Sorry, forgot to mention - tweeter and crossover are disconnected. They sounded awful! Will the cab lose any power at 2Ohms? Is there a foolproof guide for how to do this?

I have a Peavey 410TX cab that I would like to wire into parallel for use with an SVT-VR at 2Ohms. Will it work? Teach me your ways.

[quote name='obbm' timestamp='1467228609' post='3082165'] The PA100 is a valve amp and uses a multi-tap transformer to match the output stage to the speaker load. It always gives the full output. [/quote] Cheers!!

I have just bought a Selmer PA 100, not actually picked it up yet, but it has an Ohm Selector, and you can chose between [color=#282828][font=helvetica, arial, sans-serif]3.75 (4), 7.5 (8) and 15 (16) Ohm speakers. There is also a 100V option, but I don't know what that means.[/font][/color] I have a Peavey 410TX which is 8Ohm, does anyone know if the selector enables the amp to run at 100W with any selection? i.e, if I wire it through my cab, will it be running at 100W? I understand that most amps halve the wattage if they are 8Ohm but are being played through a 4Ohm cab, but does the Ohm selector change this?

[quote name='bartelby' timestamp='1464175511' post='3057187'] I reckon you could squeeze one of these in there: [/quote] I saw this, anyone got one built they want to sell?

[quote name='fretmeister' timestamp='1464169371' post='3057061'] Boss LS-2 is by far the easiest. Good buffer in the pedal and separate volume controls for each part of the signal. [/quote] Really can't fit anything to be honest + also fancy the challenge! Ideally something similar to the clean blend on my deluxe muff.

[quote name='rmorris' timestamp='1464130947' post='3056881'] Mmmm...sort of depends whether you want low frequencies clean or distorted... [/quote] To be honest, whatever is easiest! 'Clean lows' sounds interesting. I'm not sure regarding polarity, I'm just aware that when using blendable kits sometimes there can be polarity issues.

Any chance of a pic if this is available still?

Hello hello hello, I bought an OCD clone a while back to use on bass, and while it sounds great, I'm just not getting the lows I would like. I know there are blend circuits available but then I'm faced with the issue of polarity.. is there a way I can get around this? Is there any other way of getting more bass out of my pedal? Changing caps or something? Pic of the pedals guts is up, but I can add more if needed. By the way, there is no way I'm buying a separate looper pedal for blending! All the best, SB xxx

Strings came today! I wasn't expecting the t-shirt, lanyard and pen though!! Everyone should buy D'addario strings, best strings and best customer service I have ever encountered.

Andrew from D'Addario saw this thread and has hooked me up with a new set of strings!! Customer service done properly!

Restrung today with some flat wound chromes, my problem is no longer! - 'Duff' sting it was! Thanks for the help!

My pups were slightly too high, but the intonation issue is still there. The nut seems fine, also. I think it must be a 'duff' string, I shall restring. Thanks for your help! SB