Jump to content
Why become a member? ×

beastie

⭐Supporting Member⭐
  • Posts

    211
  • Joined

  • Last visited

Everything posted by beastie

  1. Hi all got my self a lovely Yamaha BBp5 string has they are all individually set up by Luther in Japan really struggling on what measurements to start from so I thought it would be a great time to reach out to you all to find a Luther in the Essex London area for a full set up thanks
  2. Hi all after my strap luck screw worked it’s way loose and my neck hitting a side of a stage and putting a dent in the lower edge of the fretboard and headstock does anyone know who can repair and what sort of resin/lacquer fender use
  3. Hi all after my strap luck screw worked it’s way loose and my neck hitting a side of a stage and putting a dent in the lower edge of the fretboard and headstock does anyone know who can repair and what sort of resin/lacquer fender use
  4. beastie

    FFR Cabs

    Going to look at the Qsc thanks everyone
  5. beastie

    FFR Cabs

    Have they got one or two inputs as a coming thing now is to put a splitter on the line and send a bit of vocal back to your cab
  6. beastie

    FFR Cabs

    Hi Jrnxn1 thanks for the questions raised I play in 2 very different bands one being quite loud new wave old school punk playing pubs small clubs and the odd festival The 2nd is a weeding corporate band both bands are Di into PA stage monitoring is the main use going forward some times we use in ears depending on venue for the weeding Band Sometimes the punk band go straight from amps so I need to fill the room The rigs I have at the moment are as follows Ampeg Svt all valve head /Svt Pro7 4x10 / 8x10 EBS HD350 1x 15 with a pro line cab genz Benz shuttle 9.2 and a fearless Greenboy 1x12 I have tried the Headrush 1x12 2000watt cab which was ok but l it’s just not the same or anywhere near any of my full rigs or cabs in Quality of sound which is very important Price range open minded Weight of FFR is important but 20 kg is still ok But must be powerd
  7. beastie

    FFR Cabs

    Looking for a powerf FFR cab for bass what is out there for 5 string players going to be using the Ampeg SGT Di
  8. Selling this cab due to little use iam useing a Heritage 4x10 it has a couple of marks on the top where it was caught with my svt amp comes with official Ampeg cover sounds amazing will post some pics when I get up the studio buyer collects as I can’t ship this item I have the relevant paperwork and receipt
  9. Hi I bought one 2nd hand 4 yrs ago and paid £ 425 it come with a shuttle case and switch
  10. Selling Musicman stingray 4 month old 5 string this was bought for a project that did not start from PMT it has been played for a little more than 10 hrs so is in mint condition Pictures will sell itself comes with original case and case candy will post at buyers cost any inspection welcome more pics available on request
  11. Hi all don’t know what the issues you are having but the amp is still up for grabs
  12. For sale at a bargain price sold as a pair will not separate EBS HD 350 Head in rack unit in perfect working order EBS proline compact 1x15 with 2 inch high frequency horn complete with Roqsolid cover again in good working order with no issues HD350 Amp head spec Features 1100% Solid State Design 2Drive control 3Tube Emulated Drive Control 4Compressor/Limiter . 5Powerful 4-band EQ 6Serial and Parallel Effects loop 7Floating balanced XLR output 8Built-in speaker simulator 9 volt EBS Phantom Power System 10Active Intelligent cooling system Technical Specifications Input Impedance: 1 Mohms Frequency Response: 35 - 20.000 Hz Maximum Compression Ratio (Compressor): 3:1 Tone Controls: Bass: +/- 15 dB @ 100 Hz Middle: +/-12 dB @ 50 - 3000 Hz, Q=0.5 Treble: +/- 15 dB @ 4 kHz Bright: -0/+20 dB @ 10 kHz Drive Control Gain: 0-30 dB Drive Type: Solid State Other Features: Character filters, Phantom power, Effects loop and Balanced Output Minimum speaker impedance: 2 ohms Dynamic Output Power: 350 W RMS Continuous Output Power: 300 W RMS Dimensions (W x D x H): 19" x 13" x 2U (48cm x 33cm x 9cm) Weight: 9 kg / 20 lbs speaker specs Eminence Bass Driver (no issues) Frequency Response 50Hz - 18KHz sensitivity 103 db power rating 400 watts RMS impedance 4 ohms volume 84 liters Height 51 cm / 20 “ Width 58 cm / 23 “ Weight 28 kg / 62 lb
  13. For sale at a bargain price am sold as a pair will not separate EBS HD 350 Head in rack unit in perfect working order EBS proline compact 1x15 with 2 inch high frequency horn complete with Roqsolid cover again in good working order with no issues HD350 Amp head spec Features 1100% Solid State Design 2Drive control 3Tube Emulated Drive Control 4Compressor/Limiter . 5Powerful 4-band EQ 6Serial and Parallel Effects loop 7Floating balanced XLR output 8Built-in speaker simulator 9 volt EBS Phantom Power System 10Active Intelligent cooling system Technical Specifications Input Impedance: 1 Mohms Frequency Response: 35 - 20.000 Hz Maximum Compression Ratio (Compressor): 3:1 Tone Controls: Bass: +/- 15 dB @ 100 Hz Middle: +/-12 dB @ 50 - 3000 Hz, Q=0.5 Treble: +/- 15 dB @ 4 kHz Bright: -0/+20 dB @ 10 kHz Drive Control Gain: 0-30 dB Drive Type: Solid State Other Features: Character filters, Phantom power, Effects loop and Balanced Output Minimum speaker impedance: 2 ohms Dynamic Output Power: 350 W RMS Continuous Output Power: 300 W RMS Dimensions (W x D x H): 19" x 13" x 2U (48cm x 33cm x 9cm) Weight: 9 kg / 20 lbs speaker specs Eminence Bass Driver (no issues) Frequency Response 50Hz - 18KHz sensitivity 103 db power rating 400 watts RMS impedance 4 ohms volume 84 liters Height 51 cm / 20 “ Width 58 cm / 23 “ Weight 28 kg / 62 lb
  14. It has its original intact Rick case I was referring to a cardboard outer box for shipping
  15. For sale is my 2019 4003 in the much sort after midnight blue in mint condition the bass has had very little use and have decided to let it go it has had the original bridge removed and changed to the new Ricky bridge with access to intonation screws .It also has had the pickup cover removed and bevel insert fitted and also a Ricky thumb rest fitted all work carried out by Rickysounds it comes with the original bridge and pickup cover and unopened case case and case in the pictures you can see stereo cable which is not for sale serious buyers only please can post at buyers cost it will have to go fully insured and I will have to buy a box from hiscox to ship which will cost £25 of course collection is available the site is not allowing any more pictures to upload due to file size I can send other pictures on request
  16. Tech 21 SansAmp Delux pedal very light studio use no box no scratches or marks great Di fantastic sounds £160 including postage
×
×
  • Create New...