Jump to content
Why become a member? ×

Leaderboard

Popular Content

Showing content with the highest reputation on 14/01/21 in all areas

  1. And the next challenge - getting the chamber cut for the electronics when the screwholes are going to be so close to the edge. The process was basically to cut it undersize, and then fit it bit by bit a bit like when you are making a tight-fitting control chamber cover. The tools were the same as the neck pocket - hog out with forstner, bring to line with a chisel and to depth with a router. Here it is hogged out and edges being tidied up with a chisel proir to the trial-and-error fitting: And here with the battery box also cut, the chambers deepened on the router and the cutaway for the truss rod access next: And fitted, ready for a repeat of the process to fit the mighty Wal pickup :
    9 points
  2. A little bit more progress today. I drilled the holes for the tuners in the headstock plate. Seems easy enough but with my limited tools at home nothing is ever straight forward. 😄 The ferrules are just over 12mm and the biggest drill bit I have at home is 10mm, apart from some step cutter type bits. Also marking the position of the four holes proved trickier than you'd imagine as they'd have to be bang on or I wouldn't be able to get all four in. The inner diameter of the ferrules was 8mm though so I hatched a plan, yes Baldrick, a plan so cunning you could pin a tail on it and call it a weasel. Well nearly. It taped the plate into position on the front and popped the ferrules in from behind. I could then use an 8mm drill bit and the ferrule would act as a guide to stop it wandering and keep things aligned. I then ran a step drill through until the 12mm section and tried the ferrules, and they fit, but were they in exactly the right place? Tried to slot it all together and as if by magic, it actually fits. The neck is now on and I can pop a pair of strings on and line up the pickups tomorrow. The badge I mentioned further back is hopefully being sorted. @Dad3353 & @BigRedXhave teamed up and most kindly offered to design and 3D print one and it should be just the ticket. Massive thanks fellas. 🙂👍
    8 points
  3. My 1968 Fender Precision (A neck) is sitting in its case in the corner of the room. It's only been out of the case twice in nearly 20 years! It was seriously modded in the 90's, so there is little "original" value there. I have no urge to gig it and it's been around for so long I'll probably never sell it either. Here it is . . . .
    6 points
  4. [Mod's Hat On] It's too much of a hassle to tidy up topics of the sort. This one has had its say, and is now 'retired'. The political garbage will have to stay, but it's polluting an otherwise interesting topic. A shame, but there you go. Some folks just can't help it, it seems. [/Mod's Hat On]
    6 points
  5. I think the bass I’ve owned longest is, technically, one of the ones that cost e least but only because of the state I bought it in. It’s a ‘64 P that had been stripped and refinished in a horrendous natural lacquer that looked & felt like Ronseal. The neck was particularly hideous and sticky (although the fingerboard is lovely). I bought it in pieces from the USA where someone had started a restoration but ran out of money. It turned up, in the original ‘64 case that’s obviously been gigged within an inch of its life, with all the bits in little ziplock bags, right down to original screws and wiring loom etc. It sat in pieces whilst I tried to think of what colour to have it finished in. One day I was randomly chatting to a luthier friend and asked who he’d recommend for the refin and what he thought of possible colours. He asked to take a look and found traces of the original Olympic White in the neck pocket and cavity routing. He had officially stopped doing refins but, by complete chance, had one last quantity of nitro left and it was Oly White! He volunteered to finish it off and put it all back together at a ‘mate’s rate’ price. Took about 2 years before he was entirely happy with the finish but he did an amazing job. The nitro has aged quickly and is already fading and checking beautifully. On a personal note it has an attachment as it’s the bass my gorgeous grandson chose (out of a rack of about 12) when he told me he wanted to learn to play when he ‘grew up’. Unfortunately we lost him later that year but I’ll always remember that day and have a pic of him trying to play it somewhere. Can’t imagine I’ll ever sell it.
    5 points
  6. Just to go against the grain... The bass I've owned the longest is my Veillette Citron which I had to import from The States. One of maybe 3 in the UK it is lovely to play, great balance and amazing tones. I generally let visiting bass players play it since it may be the only opportunity they'll get to play one of these 80s masterpieces..
    5 points
  7. I did check that they weren't 'Stone Cutters'...
    4 points
  8. If she had bothered to read it she would have found that they had capitulated on fishing, even after all of the fuss that they made about it! The level of incompetence of government in this country over the past decade has been staggering. It never used to be like that (both parties were pretty capable at governing the country, whether you liked them or not).
    4 points
  9. I reckon this is complete. I really like all of these pedals and there's no room for any more unless I level up my Tetris skills.
    4 points
  10. https://www.nuxefx.com/mighty-plug.html Hi folks Full disclosure - NUX haven't paid me for this review but if they'd like to, let it be known that I'm happy to say whatever they/you like for cash. I play through headphones a lot. Rather than seeing it as a way of 'getting by' before being able to use a bass rig, I have made them central to my home setup where I do 90% of my playing. I'm using a Roland VB99 and a bass board by Tecamp for tactile feedback when playing along with music on Spotify or tracks I'm playing on for people. I love it because it's dead quiet, I can control the sound to my tastes exactly, nothing in the room rattles (or if it does then I can't hear it!) and I can rest easy knowing nobody else can hear me and steal my amazing basslines. I'm very picky when it comes to in-ear or headphone sound and especially sensitive to noise and distortion, having being spoilt by a crystal clear sound from the (outdated but very much still current) Roland. In the past I have tried lots of small battery powered headphone amplifiers, looking in essence for a small portable version of my home setup which in my head should be quite possible these days. I've been really frustrated by the ones I have tried so far - either they don't take batteries, they have loads of white noise, digital noise or otherwise, they are awkward, necessitating cables going in and out and all around, especially when adding a phone with some music to play to into the mix, and they lack any signal processing or adjustability. Most of them are cheap, like the Vox Amplug, and aren't intended to be anything more than a little gadget which might very well do for using now and then, so that's understandable. Enter the NUX Mighty Plug! Advantages: - It's super quiet. When you're not playing there is a barely perceptible yet smooth and more than acceptable level of noise. On some settings this is enhanced when playing clean and solo but negligible and inaudible when playing along with anything. - The app. I can open the app on my phone which connects to the plug by bluetooth. No extra cables! It has backing tracks, a drum machine and (for bass) three saveable presets with a good range of effects, cabs, apps and reverbs (which I find essential for solo noodling). - I can play music from my phone (Spotify, Youtube, whatever) to the plug and jam along, and there's even an EQ preset for the incoming audio to scoop out the bass which is quite neat. - It drives my IEMs fine and gan go VERY loud, but I think it sounds far better at low volume - Internal battery which seems to last very well. You could charge it from a power bank if you were hiding from an invading army and working with a guerrilla resistance force in the mountains with no access to power - Price! I paid £62 with delivery and stuff from here Disadvantages: - Doesn't drive my over ear headphones as well as IEMs - it doesn't go as loud and rolls off the treble a bit, but using a second preset I can save a separate setting for them and adjust to compensate. - Has a micro USB input for power, which are the worst connectors ever invented and never seem to accept a cable regardless of the angle of attack or thrust. USB-C would have been nice - No compressor/limiter 'effect' - I think this would have elevated it to be the perfect device. Currently it takes some getting used to the way it behaves with different basses to get a good consistent sound which doesn't;t distort the output, hence a preference for using it at lover volumes. I think a limiter would have been a great addition, but potentially it would introduce some noise which would be counterproductive. A good limiter wouldn't be an easy 'effect' to add, maybe. So that's about it - but then I plugged it into my Backbeat Insane! The backbeat can work in several ways - it can 'rumble' just your bass, pass that to the NUX then your headphones, or rumble the NUX including the backing tracks then go to headphones - but I prefer the former at lower volumes. The effect of feeling the bass means you can play very quietly and still feel every note. I'm well used to the feeling after using a TecAmp Bassboard for years but it's quite a weird experience having the same feeling in a portable package. So I'm very pleased with it; for the price I think it's absolutely brilliant! Cheers ped
    3 points
  11. I am trialing this. I will put metal strings on it BEADG. I will see how it behaves. If it settles (it has a truss rod) then I will get a magnetic pickup routed into it - probably one of those Delano Oval ones cos they are fit. I will also put a standard bass guitar bridge on it. It could benefit from a tummy cut and a forearm cut. We shall see. It was 200 all in from China. The woodwork is fine and dandy. The fret tangs are a bit sharp. It is vol and 3 band eq but a mag pickup would go passive vol and tone. All the pots have a center detent. Yes, all. Great for those half volume moments. If it does not take metal strings I will flog it. As with all my projects, I reserve the right to take an inordinately long time about it.
    3 points
  12. I've bought and sold a fair few basses over the past 5 years and find myself really happy with the shape and balance of my herd. I'm fortunate to have some lovely basses including a Ken Smith and a Yamaha BB NE2. However... I was taken aback recently when the penny dropped that the three basses I have owned the longest are actually my three least expensive ones! Here's a pic of my second oldest, a Yamaha BB1025, bought end of line from the Yamaha store in London for a very decent price, to get the ball rolling. It's seen off several other PJs and I suspect I'll never move this one on: Any of you got a similar story about your budget basses being the ones that have best weathered the test of time? And of course, it doesn't have to be just basses that can inspire loyalty! I bet there are some wonderful amps out there too that you've held on to 'cos they sounded great but didn't cost the earth?
    3 points
  13. 3 points
  14. My Orion. It's one of the "cheap" models but it's still something which is a joy to play every time. You can see where the money goes in them.
    3 points
  15. The previous owner had painted it black, then wrapped fishnet stockings around it and sprayed grey over the top to give it a snakeskin effect. It had active Status pickups in and as a result both looked, and sounded, horrible. Looking back I have absolutely no idea why I bought it, other than I had just been bitten by the P-bass bug and it was the cheapest one I could find. I paid £400 plus another £50 for the shop to refinish it. Picked it up a week later and they had done an amazing job. Put some SD Quarter Pounders in it and it’s been my go to workhorse ever since.
    3 points
  16. Aye I bought tickets too. Great guys down at Alpher.
    3 points
  17. Let's hope the sellers don't take the... mick.
    3 points
  18. He won't be able to reply , as he's in hospital with Covid again .
    3 points
  19. Right - who's handing out numbers - I'll take 1205 please 🤣 After 14 years away, I am back with Ibanez... the things we do when G.A.S. attacks!
    3 points
  20. The bit of bass related gear that I’ve had the longest would be my fender CS ‘64 jazz, sonic blue with matching headstock. It even featured in bass guitar magazine. @molan helped me obtain it via the old shop and I think (he may be able to confirm) that this was April 2015 ish. I gigged it a lot up until 2018... not played it for a long time as the Status and Sadowsky now get all the gigs.
    3 points
  21. Haha! Well here’s the 64. Restored by John at Bravewood in Cornwall:
    3 points
  22. So I absolutely love a P bass, this is the current crop with another incoming from @Beedster Some vintage ones (65 and 66 ) some bitsa, some custom builds and a couple of Lakland Bob Glaubs. I love them all! I mainly gig the Black Lakland and the 66 CAR but they all have their own personality. Is 11 or 12 too many? Thoughts of thinning the herd chill my blood 😂
    3 points
  23. Read a great article by two blokes who built a double bass with a fully carved maple back (https://maestronet.com/forum/index.php?/topic/328014-making-a-double-bass/). Initially they didn't want to use a router, but then realised that even Stradivarius had a router ... called the junior apprentice (apprentissimo). "Take this chisel laddie .... see that 4x 2ft piece of wood over there"
    3 points
  24. I've had my ESP 400 Series since late 92. At the time, I was deciding between a 75 Precision for £250 and the ESP for £300. Financially, I made the wrong choice and went with the substantially better bass.
    3 points
  25. Well, the new member of my BB family has arrived today. It's red is even more beautiful than from the pics. I thing gold hardware will fit very well.... Super low action ! NICE! Edit: Even the pickup rings of the 1000MA should fit... Put a ring on a 300 before, looks killer!
    3 points
  26. I’ve owned many very expensive basses and the two I’m left with cost me a total of around £800. Part of it is increasingly high levels of skintness, but also a recognition of what I need versus what I want. The latter tends to be where the expense creeps in
    3 points
  27. In fairness, this is a discussion on politicians rather than politics. I think it's fair comment to say that politicians, these days, exhibit a marked tendency to stay in post when they have done things that would have been career-ending a few years ago. I should add that this is not just the UK either. There was a time when openly mocking/imitating someone with a disability would have been the last time such a person was able to aspire to/hold any kind of political office.
    3 points
  28. NOPE. IM NOT FALLING FOR THAT AGAIN
    3 points
  29. (I keep it) Trade only (value 4500 euros) Leduc HUB3F-4. New condition Date of manufacture: Dec 2017 Two year wait. Manu Vallognes model Ubass fretless 4 strings SJB5 + RMC Hybrid One single magnetic pickup Options: - 2 knobs only, not totally machined routings for the "4 pots" - Fingerboard going up to the pickup Ordered on 05/07/2015: Delivered in December 2017 (very recent bass) Description of a floating top bass, model: UB3F-4, fretless, 4 strings Features of the NECK: set neck, scale: 860mm, maple neck, with Para rosewood fingerboard (Brazil), thicknesses at 1st and 12th position: 21.0 mm to 22.5 mm, thin and fast (0.83’- 0.89’), shape of the neck: more "fleshy" grip on the side of the high strings (more tone), Head type: headless, tailpiece tuning, Features of the FINGERBOARD: number of positions: 28, usual on Masterpiece and U-basses fretless, nut width: 36 mm (1.42’) 4 strings, string spacing at 9 mm (0.35’) PB, width at the end of the fingerboard: 61.1 mm, fingerboard radius: 305mm, bone nut, markers: all dots in ivoroid Ø 1.5mm, 1st oct on the bass side, 2nd on the treble side, side markers: cream plastic Diameter 1.5mm, no additional inlays on the fingerboard, Features of the BODY: Brazilian mahogany body with a red cedar top with rear comfort only, strap buttons: 1 on horn and 1 on the right, standard, output placement (s): rear face on Strat type plate, varnish: oiled / waxed finish, body thickness 45 mm recommended finish: natural waxed Features of the TOP: the table is of the floating type in red cedar, the bracing bars are made of premium spruce, Features of the PARTS: finish colour of the metal parts: cosmo black, machine heads: Leduc string lock for headless basses, strap button model: Schaller with "security-lock", bridge: wooden bridge, potentiometer buttons: wooden, flush, 2 potentiometers only, flush and the same wood as the body (mahogany). Volume towards the horn and balance (smaller button) between the body and the table, Features of the ELECTRONICS: type of electronics: passive electronics potentiometer configuration: flush volume, built-in blend, NO TONE! routing between body and table limited to the single potentiometer access to electronics: Access from the rear recessed plate, passive magnetic electronics and 'RMC Hybrid' mixing preamp between magnetic pickup and 'RMC Acoustic Gold' piezo Features of the PICKUPS: fixing method: at the bottom of the routings bridge pickup: single coil Jazz Bass type Additional Notes: Seymour Duncan SJB-5 pickup strings 45-60-85-105 D’Addario flat wounds ————— —- Asking second-hand price (to be negotiated) ———————————— Details of the purchase price: (UB3F-4 U-Bass v3 fretless, 4 strings, 2 mag, passive 3900.00 € op3-1M U-Bass option, no neck pickup -100.00 € op3-4RMC Option UB 4 strings, RMC piezo and Hydrid preamp 600.00 € Total including tax Net price 4400.00 € + Pmau-n “Comfort” plate (ramp) between pickup and fingerboard, same wood as the fingerboard € 150.00 Total including tax Net price 4550.00 €
    3 points
  30. I may be able to beat them on price. I've been asked for some funny ol' things, mainly from fellow RC 'plane enthusiasts. A couple of pilot projects, for some US buddies ... One for France ... It doesn't always go to plan, though...
    3 points
  31. Suprise visit from UPS this morning delivering my Ibanez.
    3 points
  32. My Warwick Thumb was approx £1200 in 89 when i bought it from Sound Control Glasgow. Bass Centre had a sale on at £980 and i challenged them that i could just get it from Bass Centre so they gave me it for £980. Its the longest i've ever had a bass and after playing it yesterday for a while i don't ever see me selling it. Its simply glorious to play with its very slim neck and low action with that classic Warwick growl. Dave
    3 points
  33. Build your own/put one together and you’ll get exactly what you want. I build them and also have 2 of @Beedster builds along with many, many other P basses 😂 If you want a decent P bass today that is excellent value and sounds and plays like a P Bass should, buy the Nate Mendel in the classifieds. I’ve had a few, still have one and they are exceptionally good. If you don’t like it, you’ll not lose money on them either.
    3 points
  34. I bought this pedal on here last march and its a great pedal. Its a custom build with one side Knightfall distortion and one side Tarkin Fuzz. The knightfall side has internal diodes to change the clipping. Works perfectly and sounds great. the pictures are from when it was sold to me as i haven't had a chance to take any in good light yet. I'm asking £180 with free postage. Now sold!
    2 points
  35. I've just bought two items from Gumtree both from different sellers, paid for both via bank transfer, let's see if either actually arrive!! 😂 Livin' on the edge me!
    2 points
  36. Posted this before but I’ll just throw it back up to keep the thread going. Series 2, 3/4 point body and crown headstock, burl maple front and back, chrome metalwork. Fire & Ice.
    2 points
  37. Don't get Prize Draw confused with a Raffle; Raffles are lawful when the beneficiary of the lottery is a charity, which in this case it is 100%. I don't think you need a license either, unless it reaches a Threshold, which is definitely some way above what Chris will get here. Have full faith that Alpher will know exactly what they are doing
    2 points
  38. Well, I’ve owned 2 and played dozens, at the very least. Some have been stellar, some ok, some not great, but they’ve almost all been heavy! Here’s my custom Triple O, and with my second Warwick Dolphin Pro 1.
    2 points
  39. Maybe I just got lucky on this one, but the bit of bass gear that I've held onto the longest is actually an amp not a bass. I fell in love with it the instant I first played through it. It was housed originally in a PH212 combo and together weighed a staggering 80+ lbs! I managed to offload the cab in a trade for another cab which I then managed to shift to buyer in NI with a ridiculously large courier fee plus a few pedals that no one really should have wanted, except that surprisingly there were some on eBay that did. Anyway after considerable effort and wheeling & dealing I ended up with just the bit of kit I really wanted, the Mesa M6 amp and for a fraction of what they can go for new. And at 25 lbs it's literally staying put I bet I'm not unique on this and that there are a fair few valve amps and Trace Elliot heads that are still besting modern D class gear!
    2 points
  40. 2 points
  41. I’m very lucky to have two pre-CBS Precisions, which have solved my old-school P gas pretty much completely. This is my 64, running DI through my Noble: For a more modern P sound, my Dingwall Super P5, my Sadowsky NYC P/J and my recently acquired Yamaha TRB-5P all sound absolutely phenomenal. The first two have the Sadowsky pre, the Yamaha has a John East. The BB435 I sold recently also sounded incredible.
    2 points
  42. Plenty of sustained notes, not a 'see how fast I can play' montage.
    2 points
  43. Same riff played fingerstyle, with a pick and slap, in isolation, side by side. Repeat for different types of bass (P, J, ‘Ray, etc). Then the same again, but in a mix. Cover all the basses - pun intended.
    2 points
  44. HMRC say this (in guidance updated on 31/12/20) - love the way the form still has a Customs & Excise number!! There are links to further information from the form link. Nice and easy eh? Claims for rejected imports You can claim repayment or remission on goods imported from outside the UK when: you’ve rejected the goods because at the time of declaring them to a customs procedure they’re: defective damaged before being cleared by customs not compliant with the terms of the contract you imported them under they’re the same goods from the original customs declaration you’ve not used any goods, other than the minimum necessary to establish they were defective or did not comply with the contract you’ve not sold the goods after finding them to be defective, damaged or not compliant with the contract you’ll re-export or destroy the goods You cannot make a claim if you already knew the goods were damaged or defective when the contract for sale was made. You must submit form C&E1179 at least 48 hours before the goods are packed for re-export or destruction.
    2 points
  45. My guess is it got walked on. I've seen them do it when they've delivered to work. 'The big green parcel machine', Tuffnells used to deliver a lot of our stuff and the driver would be in the back walking on parcels to get to the ones he wanted. The vans have got 'The people who care' on them as well.
    2 points
  46. The thing is the changes need to be in place plenty of time before the Covid restrictions are lifted, so that everyone knows exactly what is required once gigging anywhere is possible again. Right now what I am being told is that given the current situation (pandemic restrictions not withstanding) it's simply too much effort to bring the support band as well as the headliner over from the UK. @Al Krow I admire your optimism, but right now I see a opportunity which we have spent the last 3 years working towards by delivering at the UK gigs in serious danger of slipping away.
    2 points
  47. I decided to do the back and sides black and the top has had a little wipe of danish oil Next job is to veneer the headstock and the rout out the control cavity......👍🏻
    2 points
  48. But yes, if you know what you want in a Precision, then a bitsa self-build is the way to go, and often cheaper than buying a whole bass. The below is my keeper instrument, OK I've come close to selling a couple of times due to COVID cash flow issues, but having survived it remains my go to bass. It's like a Fender Custom Shop Tony Franklin Relic, although slightly more resonant than was my original TF (courtesy largely of a VERY good Warmoth neck with perfect ebony board and shallow depth 44mm nut which has made every bass on which it has been installed resonate for longer), Lollar PJ set, Kiogon harness, vintage Gotoh lollipop tuners (the aesthetics of which for some reason I really like), all for around the cost of a used MIM Precision. As per some of the comments above, basses are a lottery, with bitsas you just keep playing the lottery, albeit with components as opposed to instruments, which is a lot cheaper. It's also far more diagnostic/scientific, because with each switch you're in effect conducting a controlled experiment along the lines "what difference does switching this for this actually make?'. You get there eventually, it's fun but you also, I believe, end up with a bass that you feel closer to as the result.
    2 points
×
×
  • Create New...