Leaderboard

I have a really nice example of a USA original Peavey Cirrus V bass. I bought it whilst living in the USA. Unusual and new, it has a delightful rich tone. It’s just I’m trying to clear wall space down to say two basses its a bit posh for me, I never use a lot of my basses and hoarding is a waste. Description Spec The body is of Red Oak and Alder composite. The fingerboard is in Rosewood at 24 Frets. It’s a long neck. A 35' single wood through body bass. Tuners are Gotoh 720’s I think. Original anyway. The Bridge is an original milled brass bridge, and all parts are in gold colour. No pitting or deformities. The Control section is comprised of Volume, Pickup blend, EQ: Bass, mid & treble controls with a 10dB boost/cut a huge range of tonal controls. Comes supplied with the original Peavey Hard Case. I’m not looking for trades to be honest, (although I have seen a few ACGs that get me damn near close, she says not looking for any more “posh” basses). Hit me up with a PM if you are interested.

Now £350 Are you sitting comfortably..? then i'll begin A few years back the fine people at Enfield/SIMS were selling off some stuff from their workshop. This is one of those things. Its was a P bass body with about 2mm skimmed off the face and an Acrylic cracked mirror facing expertly applied. The 21 fret (yay high E!) neck is Maple and the headstock was modified to give a more old school p bass vibe. Hardware was a knackered old BBOT bridge and no electronics. The Back is gloss black by the SIMS paint shop. I started out by cleaning and doing a set up to see of the neck was any good etc. Turned out the heel of the neck had to be reduced by a couple of mm, which i did (probably due to the skim from the front for the acrylic changing the neck pocket presentation). I also tidied the headstock the Nitro varnished the back of the neck and knocked it back to give a very smooth and non sticky feel. On the body I installed a Kick-donkey (edit KICKASS) bridge, my go to p bass pickups the Dimarzio DP122 (adjustable pole pieces., high output, great tone), Copper shielded control cavity, CTS pots, orange cap and cloth wiring. The machine heads are un-stamped but are very good quality. Suspect they are Schaller or similar definitely not a Chinese £15 a set! I tried a few scratchplates and settled on the mirror one you see here. Weight: approx 9lbs or 4kgs.. The bass now plays great, warm hi output and looks the nuts, or at least looks unique! I have gigged it a good few times an it always generates positive comments. It certainly has 'mojo' and plays great, truss rod is free and adjustable, plenty of room to manoeuvre on the saddles for low/hi action. There are scratches on the back and one dint in keeping I guess from a guitar that sat around in a workshop for a good while Condition is subjective I guess as its seen some life not road aged or heavily knocked about but there are a few dints here and there, but show room isn't what this bass is about. It's unique characterful and lets face it Shiny! So to sum up this is a very nice p bass, you definitely wont see another, plays well, choice hardware and all for the price of a Squier... Some pictures...apologies is needs a wipedown edit: just run some polish over the back, and most of the scuffs have polished out..last pic of back updated.

I assembled a bass from some nice parts. I’d really like to get down to two basses soon. I have a fretless Precision Jazz with Seymour Duncan Quarter pounder pups, Fender tuners, a hipshot badass 4 heavy bridge, brass nut and a lovely flamed maple neck. Fender neck plate. Rosewood marker-less fingerboard (be warned the side dots are not for fretless, I know I know, it’s what I had to hand) Current strings are LaBella Heavy flatwounds. It’s not a proper Fender PJ (the decal *definitely* wasn’t my idea, but i kinda fell in love with the Flamed maple and the skunk stripe was just [chef’s kiss]) parts were all new and unused and sourced here and there: ebay for the body, basschat, talkbass — but it’s a lovely ash body bass and in beautiful condition. weight is 5.4kg. 11lbs yeah. It’s not light wood but heavy lumber and a real woody so it rarely gets used in my Punk Rock Project. The profile of the neck is very comfy and it has a great tone. Just clearing wall space. The neck is bolted using stainless steel bolt inserts (this is standard in all my builds) and this is good for sustain and tone and general sturdiness. It’s also a good low action and the bass has a really satisfying growl. Looking for £399 plus shipping (which is less than the cost of the parts). Also comes in a tatty but safe for shipping gator case.

Shuker Series 2 custom 6 string bass. Comes with high end custom flight case. Immaculate condition. With case this would be over £3k now.

35" scale graphite through-neck. Drop A-tuner fitted to the B-string. Made for me in 2004 by Rob. A few small marks to lacquer here and there, and a small 1cm hair-line to lacquer by jack-socket. Plays like butter and is booked in later this month to be re-strung and intonation +set-up as necessary by https://www.southamptonguitarrepairs.com/. Will be supplied with original Status hardcase. Available for testing / trial in Hampshire, near Winchester - SO53. £1500

Back for sale, this time for trade too. I think this bass don't need a description. Anyway, you can find the specs in a picture below. Condition 9.5/10, papers, original Status/Hiscox hard case, strung with almost new Elixir nickel 45-105 + 130TW. 34.75" scale Adjustable string spacing at the bridge (now 18 mm) 47 mm nut 4.5 Kg on my bathroom scale The buyer will pay the shipping, I'll send fully insured through DPD (up to 50 Euros to EU and UK, I think) The price is €1500. Only Euro, please! Trading options - Spector or Warwick Streamer (+ money or not), but try me, who knows... Please PM. Thank you!

A big potential purchase has come up and sadly I need to move on a couple of basses to help pay for it So, as a result, here is my lovely Hartke XK4 active bass. I always wanted one of these as I had played one in a shop approx 15 years ago and had been blown away by the massive (almost Status/Modulus graphite-sounding) active tone, striking black/chrome and brushed aluminium looks... and easily playable neck that felt like it was short-medium scale! It didn't disappoint and I've hugely enjoyed owning and playing it. Indeed, soundwise, it's been a fave of many musicians I've ever played with as it cuts through with authority and ease. Here's the original sales blurb from Hartke: Designed to Larry Hartke's specifications and featuring high quality components throughout, the XK-4 represents a more accessibly priced option for professional bassists. This precision instrument features a Poplar body coupled to a Vaccaro double T-Bar aluminum component neck system with a rock maple neck shell that provides a familiar feel and easy playability. This unique neck system consists of a lightweight aluminum aircraft extrusion welded to an aluminum triple-plated chrome headstock. It not only ensures maximum resistance to atmospheric conditions and string tension, it provides exceptionally long sustain and tuning stability over the long run. A Rosewood fretboard with ultra fat action neck finish and Nickel-Silver frets further enhance playability while the XK-4's Zero-fret design provides flawless open string response.To best capture its extraordinary sustain, tone and presence, the XK-4 is equipped with high performance passive pickups and active electronics. Other features include dual volume controls; concentric bass/treble tone controls; a chrome bridge and tuning machines and a brushed aluminum finish pickguard. Like the XL-4, there is a lifetime guarantee on the neck assembly. Poplar body 34" scale length Vaccaro double T-Bar aluminium neck Chrome-plated headstock Rock maple neck shell Rosewood fretboard Nickel silver frets Zero fret for flawless open string response P-J passive pickups with active electronics Dual volume controls Concentric Active Bass/Treble controls Heavy Duty 'Hartke branded' Chrome bridge Gotoh Chrome tuners Easy access 9-volt battery compartment Brushed aluminium finish pickguard Sadly, less than 1000 of these were ever made when Vaccaro suddenly went out of business and production ceased in around 2002. Condition is excellent (especially for a 18 year old bass!) with just a couple of very light surface dings on the body edge. More pics available on request. These are high quality instruments and were priced at around $1000 / £800 new when they came out. I therefore feel I'm offering a bargain at just £SOLD! Happy to courier at your cost (prob around £50 for 24hr UPS via Interparcel). Payment by cash on collection (from Guildford/Woking area), Paypal (you pay all fees) or direct bank transfer. Please see my extensive positive feedback thread for assurance of a clean, honest transaction.