Leaderboard

Ignore any chafing observations that may appear here. In expressing your dissatisfaction with a musical instrument retailer you are following in the highest traditions of BassChat. Not a week goes by that one of us does not put finger to keyboard the better to chronicle the deficiencies of sundry guitar emporia and / or their carters. Some abhor the over-pushy salesperson; others detest the chap who cannot hand us a bass without first sitting down and slapping away like a spoons-player with St Vitus dance; profound contempt is reserved for the purse-lipped, nicotine-stained geriatric proprietor and his dopey, hopeless shop-boy alike. The happy retail experience is so vanishingly rare that it is greeted with wide-eyed surprise. Even beyond the retailer we hurl our bile at wholesalers and manufacturers and their endorsers and their suppliers and their advertising agencies and so ad infinitum. Frankly, it's the right thing to do. Any erring retailer who gets off with as little as a redacted thread like this should count himself lucky. For myself, when thwarted by some ghastly till-monkey I adhere to a firm two-step policy of (i) a savage, public tongue-lashing followed by (ii) a bullet in the face in a deserted warehouse.

To those who feel I should have contacted the store in question...please re-read my original post! It was the first thing I did. Before starting this thread. It was meant as a general sound-off, not to demonise what I otherwise regard as a reputable business, which is why I took pains to keep the identity of the offender's totally anonymous. It may not be the way you would have done it, but hey, it's a free country for us all. An update. I received this morning a very nice email from the store owner. Very professional, very apologetic, very positive. As in all these situations, there was more than met the eye. Suffice to say said employee feel below the standards expected of him by his employer, and it has been dealt with. I can't say fairer than that.

Unbeknown to me until recently there appears to be a vast resource of information about compression, both on this site, and over other areas of the worldy wide webbie, who would have thought..... Some people seem to like it, some people don’t. Just when the reaping has occurred and a victor/truce has been announced, the Capitol announces another compressor games where previous immunity holds no sway and we are back into the bear pit. Maybe a short survey could provide a fresh outlook. Os there continued hunger, will a truce be called, or will it be Groundhog Day? Stay tuned.......

@Bluewine , look at it like this: I would have no problem turning up to a local venue that had PA, lights and often backline provided to play a 30 minute set of our own songs for free, have a couple of beers and listen to some other bands. We get to have a good night out with friends, network with other bands in the same genre and get pictures and reviews posted to online blogs which could lead to bigger paid gigs at festivals or support slots. I would not drag a full lighting rig and PA to a far away venue, play a 4 hour gig and still be packing up at 2am even if you paid me. My day job pays me more than enough to live comfortably, so I don't need the extra money nor want all the ballache required to earn it.

It’s funny how the expectation of good customer service completely switches us off to others on a human level. So whilst it’s entirely possible that this young chap isn’t a very good salesman, it’s also very possible that he’s having an awful day/week/year. So instead of checking what the case is, we complain on social media as opposed to seeing if we can offer help/guidance/advice on how that person might either fix their problem, or at the least, get better at their job. ”Oh that’s the job of the shop manager/owner” you cry! Nope, it’s the job of anyone who cares. Si

So, Just because I can, thought I'd "improve " the head amp cabinet of my BTA300 ashdown, spurred into action by the aquisition of MatampGt1Mk1amp'n'cab that is wine coloured with gold faceplate and corners. Besides many hours, this stands me at ninety quid so far, and I think will be great in the lounge on its Orange cab, yes, that's next after this !

He's nine years old, a grade 8 drummer and chose to play bass a month ago.. We've a Fender Jazz that rarely gets used, so let him try it first...... Took to it like a duck to water.... We asked what he wanted for his birthday and it was a clear "Can I have a Precision bass please?" After hunting around for a decent donor, we found a beat up Squier 20th anniversary, missing a few electronic bits - plus no 14 hole pickguard, strings or nut. Overall though, it wasn't too bad. Got it home and made a new pickguard (small design tweak around the controls - just to add something unusual), added the bits, new Fender nut, strings and gave it a good clean (oiled the board etc.)......... Here's his pressie........ To me it looks awesome and plays great. Can't wait for the reaction................

To quote the Goonies, “ HEY YOU GUYS!” So this is happening now. contacted everyone with invoices, no rush till the end of month but some have paid already and therefore hold a special place in my heart. I still have April as the delivery date which is a large window so when I get more accurate dates I’ll update you all. the geddy 2112 pre came with a badge of geddys signature so what does the dUg pre include? A free 12 string? A free six pack? have to wait and see I guess.

I like them both but I prefer the newer ones with dark against the body. Will you cap those with dark wood as well? PS: DOH! They're upside down aren't they? Still works for me like that though.

Great minds think alike... Although I've used standard MoP, this is what I remade last night: I've also made some more to replace the brass knobs on my own build

I voted Yes , I am on BC to talk bollocks

Well, if you don't really want the redundant 4 strings, I suppose I could look after them. I'll even half you on postage!

Clever comment! But in all seriousness there are of course reasons why classical musicians tend not to use compressors: The first and most obvious is because they tend to play acoustic/unplugged and so there’s... err... no signal chain for the compressor to be linked into. That's quite a biggie, really. Compressors are definitely most transparent when there's nothing to plug them into. On occasions when classical musicians are mic'd up and their performances fed through a mixing desk, there'll certainly be some sneaky compression being applied to help manage the overall mix. But yeah, you won't find it being used on stomp-boxes at the musicians' feet. Classical arrangements are written to avoid clashes between instruments of similar frequency. That’s not how composers think of it, they tend to think in terms of balancing tone and timbre, but it has the same end result. Very different to five tubby blokes belting out Moondance with instruments all fighting for the same frequency band. Classical concerts tend to be performed in rooms with far better acoustics than your average Dog & Duck. Other than that, yeah, classical musicians are mostly amateurs. Why anyone would waste their time with that sort of guff is beyond me

Something similar happened to me, my wife was nagging me about soemthing or other, I dunno I wasn’t playing attention, but on this occasion, I put her vocals through a compressor, and Lo and behold what she was saying suddenly made sense and I could hear it correctly. Well, I took out the bins, emptied the dishwasher and even took my weekly bath. Afterwards I managed to get a really squashed sound just by twiddling the knobs. As a result this one may be a keeper....

In recent months I've attended several concerts (Philharmonia Orchestra, a violin duo, a solo pianist) where there were no compressors (or indeed any amplification) in evidence at all, despite it being, as others have pointed out above, a scientifically provable, unarguable fact that compression makes music sound better (it is, after all, a simple matter of the measurable behaviour of sound traveling through air). As far as I could tell, the only mechanism they had for managing their dynamics was to rely on the skill and musicianship of the individual players! Honestly, I felt embarrassed for them. I did ask one cellist whether she'd considered using a compression pedal to help her "sit better in the mix", but she just looked at me as if I was some kind of weirdo. Amateurs.

Should we...? HELL NO! Will we...? HELL YES!

I've gigged one of these, it blew me away.

Correction: Vacuum sucks. Gravity's heavy.

Why don't you tell us what you really think rather than always sitting on the fence....?

The thing is Al, you might as well ask what impact wood glue has on the comfort of a dining chair? (bear with me...!). The glue helps to hold the chair together. Without it, that function is left to the screws alone. The chair still stands, but it's not as sturdy. And none of this is noticed by the people who sit on it. Thats about all I've got left on this discussion. My tank is empty, but I wish you well

If it was mine, I would make sure I had compatible varnish and thinners by testing on a hidden area, maybe under a tuner, make sure there's no reaction between old and new. Then apply thinned varnish to the cracks, gaps and especially under the decal where it's lifting, pushing the decal down flat onto the wet surface underneath until it sticks. When dry, build up layers as required, finishing with a coat or three over the whole area. Patience will be required!

This comment allows me to hopefully explain some of the misunderstanding around compression, so if you don't mind I'm going to dive in a dissect it a little Firstly, and with respect (not wanting to single you out), this type of response suggests that you don’t fully understand the purpose of compression. And I’m not trying to be deliberately patronising here! It's just an unfortunate by-product of me trying to explain all this. So apologies and please bear with me. Unless you are slamming a drum kit with hard New York-style parallel compression, it is very unlikely to ever give someone “a boner” as you put it. Boner causation is just not the purpose of compression, I’m sorry to say. It really is the 'bass player' of audio effects in that respect. Quiet and steady, doing its job, holding things together; no real glamour or glory. That's a compressor. Great! And you can pretty much stop right there, because you've got it - that is precisely the purpose of a compressor. And helping you sit better in the mix should not be understated. It’s the difference between a great-sounding band and indeed, one with potential to bring about boners. Even amongst the female members of the audience. And that's the part where the misunderstanding sets in. Other than very hard compression, which can be done for effect, there really isn't "any other application" apart from helping even out your signal so that it sits better in the mix. And maybe it's because you expect compression to do something else that you find it underwhelming. It's great that people comment on your tone and they most certainly do so because you’re a competent bass player and you use nice gear. But if you were to give me a bunch of your band's recordings and asked me to mix them, I guarantee there would be moments on each song where your bass is noticeably too loud or too quiet - and this would need fixing if I were to do my job properly as a (albeit unpaid amateur!) mix engineer. I could approach this by trying to automate or ‘ride the fader’: manually adjusting the level of your bass to compensate for loud and quiet notes. Or I could use a compressor to do this automatically. And the important thing to note here is that a compressor doesn't just apply to the solo instrument: it's about helping that instrument sit well alongside others playing simultaneously. It's a tool for helping to mix the whole band; not a tool for drawing attention to any one player. Does this matter in a live context? If you, your band and your audience are happy with your sound, then no it probably doesn't. As I’ve said before, compression is rarely essential, but it's nearly always beneficial. If you’re an obsessive like me, who likes to squeeze every % of quality out of a performance (live or recorded), then yes it matters. And that’s why the bass guitar on nearly every recorded song - and played by nearly every professional musician - has compression applied either at source or at the mixing desk. Such pro players have technique in spades and they use compression: because they want to attain the best sound possible. Does a pub band need to do the same? That's a question for you to answer. But if you're spending good money on your instruments and obsessing over string types/gauges, maple/rosewood boards, etc, then you're already obsessing over things that arguably have a lesser effect on your band as a whole than compression. TL/DR: you can mix your porridge smooth, or you can mix it lumpy. It's still porridge. But if you want to add other ingredients, like some blueberries and bananas, then it's best to mix it smooth for a better overall experience. Simple, right?

@tonyxtiger i’d Be happy if you stick in some tablet and a wee dram, that’ll do me

Visitors to BC over the years may well have seem me bang on about what I suppose is still a favourite 'tonally coloured' speaker cabinet, the Hartke 4.5XL. I've had about 6 of those 45Kg beasts over the years. Too heavy for my poor back now. Imagine my excitement when I find I can have 600 different IR's of this famous cabinet to play with on Helix and my DAW???!!!!! Could I have 'Dan's 90's Tone' back again??? Watch this space! (My back says thank you)

Come on Dave - spill the beans or you'll ' accidently ' be falling down the stairs at the nick

Nah that's an Indian takeaway. As was Freddie Mercury.

Time to dig out your platform boots Dave!

A little bump to the top of the forum in case you're not a regular visitor to the events page... The double bass bash is happening in a barn near Bicester on Saturday 14 April, and there are more details here: https://www.basschat.co.uk/topic/317927-double-bass-bash-nr-bicester-oxon-saturday-14-april-2018/ Hope to see you there!

But IMO it's also about having the right tools for the job. And the right tool for this job is a Roland TB303 (or a sequencer and sound module that sounds like it) and not a bass guitar. I've just had a look at a few "bass covers" of this song on YouTube and while the players are all very accomplished and have got playing the bassline down pretty well, none of them have come even remotely close to the sound on the recording, which is equally important in getting the feel of the song right.

If the shop in question is the one I think it is, I was just going to add that I have been considering going for a bit and have decided against it due to several bad experience internet posts and anecdotes. They are dotted around the net on various different platforms, and although I wouldn't usually 'cut my nose off' as some have put it here, what worries me is that the reviews are all talking about the same specific issues, despite being in totally different places, from different times, and are fairly well spread out chronologically. This tells me that the problems are consistent, long standing and most importantly, not learned from after bad feedback. Interestingly, the pattern also includes a bit of smarm following each problem, with no changing of attitude, which is even worse. I would say this is a good reason to raise grievances like this. Everyone has an off day, and maybe writing off a place due to one bad experience is rash, but a consistent lack of consideration for customers walking in the door is inviting people to go elsewhere, and how else will consistent bad practices be challenged? It won't happen by just individually moaning a bit AFTER handing over your money, (that's advocating bad practice), but shared experiences being exposed on forums like this. A lot of people here probably have a good idea of the shop that's being talked about..which kind of highlights how much of a problem there is. Good on you for bringing it up AND challenging it I say.

I think they use Cliff like Marshall. PM me as I have a couple you can try.

I'm more of a Rat Pedal type of guy, here's mine:

Ah right, good luck. just wanted to add that my comment about my PL wasn’t an open invite to buy mine, just making a one time gesture. I will be placing a for sale ad for it once I get my AS.

By the look of it quite a bit of lacquer has lifted too. I assume that it's nitrocellulouse. You can carefully use a small brush (i.e. artist's watercolour brush) to build up where the lacquer has flaked off. It will take many coats to do so. That might wick under the lifted lacquer and help to stabilise it. Nitrocellulouse will blend in with the existing lacquer - the solvents will slightly dissolve it. Obviously take necessary precautions if using nitrocellulouse - it's nasty stuff to breathe in! You'll also want some cellulose thinners for cleaning your brush. I had some lacquer chipped around the frets of the guitar I built and had to do similar. It's very time consuming. The lacquer needs to be built up slowly to allow the solvents to evaporate - 2 or 3 coats a day and then leave it for 24 hours. Scrape back any excess with a razor blade and repeat. I used rattle cans to lacquer my guitar, so sprayed a little into the cap so I could brush it on. Finally you'll need to sand it flat - I used micromesh pads then Meguillar's ultimate compound to polish it up. If worst comes to the worst and you end up with something resembling a dog's dinner, you can always strip it back, get a new decal (Rothcoe and Frost) and refinish it properly

Have you ever thought of going on QI? No? Good

Maybe the kid has been instructed not to be too pushy and has taken it to heart. I can't understand why you didn't ask to have a look and a try-out.

Come on, tell us - I didn't expect to have to grille you about it.... Sorry.

You really are straining at this, aren't you? Please stop insisting you don't have a commercial interest. It's pretty obvious that you do. Bill's original comment was not a criticism of the Markaudio system itself, but more general, so why so sensitive?. You're in danger of protesting too much. We appreciate that you wish to persuade people on here to audition a particular product. Can we leave it at that?

Played a great gig at scruffy murphys in Birmingham last night, we seemed to go down well despite not being too well known outside of Coventry, great atmosphere and sound and I had a blast, bloody warm though...

I’ve gone stereo bass!

TBH the lack of adjustability is one of the Thumpinator's greatest strengths. You simply plug it into your signal chain and let it get on with removing those frequencies that are making your amp and cabs work extra hard for minimal audible benefit (and could be potentially damaging the speakers). The fact that there are no adjustable controls means that you can't set it up so it's not being as effective as it could. Plus because you shouldn't be able to "hear" it working, there is little point in being able to adjust it.

Your research has missed some very important points. 1. No HPF will "cut off everything" below a certain frequency. What they do is progressively attenuate frequencies from the cut off point downwards according to the filter slope. Those frequencies will still be present but they are reduced in level more as you go further down from the cut off frequency. SFX have a frequency plot which shows the effect of the Thumpinator on their web site. 2. You have ignored everything else in the signal path including the human ear. While normal human hearing goes down to 20Hz, if you look at any frequency plots you will see that sensitivity drops off significantly from 160Hz downwards, so most of what you are hearing with your octaver on the open E string are the harmonics rather than the 20Hz fundamental - the brain is very good at filling in this missing frequency information for you. Also unless your rig includes PA style cabs specifically designed to reproduce signifiant levels of sub bass ( which case you should be using an active crossover and you won't need a HPF) your cabs will struggling to project these low frequencies at the same level as the higher ones. 3. Finally the design of the HPF itself is very important. IME a higher cut off frequency with a steeper slope (24dB/oct rather than 12dB/oct) is going to be far more effective at removing the potentially speaker damaging frequencies. Go too low with too gentle a slope and it won't be removing enough to be doing a worthwhile job of protecting your speakers. Also as has already been said many filter designs will as a by-product of the way they work add a slight peak to the signal at the cut off point - which is something you really want to avoid on one aimed at removing sub-audible frequencies. AFAIK only the Thumpinator is designed specifically to minimise this peak.

Unless you're spending super coupons on reproducing the fundamental a 40Hz roll off vs anything lower won't really be audible on a 5 string IME

I'm not sure that I agree with that - if your sound is boomy due to a hollow stage, and HPF can tame the boom, similarly if you want more punch and less mud, an HPF plus bass boost can fix that for you. In both cases you can hear the difference. David