All Activity

I’d say an end pin is under the ruling of a bass stand. Just checked my messages and last bass I bought was 2023! Unfortunately it’s not through lack of GAS though, so you must have a disease 😂

Let's Get Blind - Sack Street Rock

I don't need that sort of negativity in my life........

Blinded by the Light - Bruce Springsteen

Doctor My Eyes - Jackson Browne

I asked chatgpt but the info is all over the place. thanks

A bit of modification on my stingray5, changed the pickguard and made a control plate out of an old standard 5 pickguard

So true. . . .

The Starchers

Because most of my cabs never get truly finished I've a lot of loose wires in many cabs, and vibrating wires do happen but not often. I usually fix one end to the speaker itself with cable ties leaving enough slack to avoid stressing the connections but tight enough not to flap around. I bury the other end under any wadding and that stops that moving. I don't leave a lot of slack though, just enough to be able to remove the drive unit easily

Me too.

I came up with the same number as you did, none.

£99 on Andertons. https://www.andertons.co.uk/behringer-meatball-envelope-filter-pedal/?search_query=behringer meatball

yes it certainly sounds like the preferred option, thanks very much for all the responses. a combination of a curved body, a belly carve and a front carve like the mk1 should work well

I admire what you are suggesting. However, the thread is into many pages now and as we know people do not read through all the posts and many have a short memory. This was always going to happen with a thread like this, so just roll with it.

Thanks for sharing that. Be interesting to see what Behringer are going to be retailing these for? Hopefully will put these within reach of many more musos given that the original Lovetone Meatball typically sells for around £750 used!

By a luthier/specialist; just looking for a ballpark figure. Assume entire instrument sent rather than body only. Nothing fancy, a solid colour, perhaps a light metallic fleck. Any recommendations of people who are particularly well regarded for this type of work? Cheers, Rich