All Activity
- Past hour
-
BassmanPaul started following Ampeg V4B v Ashdown CTM100
-
I don't know what the tube complements od the Ashdown but the 7027 tubes used in the V4B are very very expensive. up to a thousand bucks for a set of four from Fliptops. They mention the British KT88 are an alternative.
-
I had another look at my Little Board, after my previous post here, and basically redid it entirely. I wasn't quite happy with the Harley Benton PowerPlant Tuner before I managed to damage it, and it wasn't quite right afterwards. So I got a better PSU with all-isolated outputs and tried again: Peterson StroboStomp Mini tuner - still the best tuner I've ever owned Orange KongPressor is back, because I had the space, and with a doubler cable it's getting 18V. Boss OC-5. I still have the MXR Bass Octave Deluxe, on my big board this time. The OC-5 is here because I'm experimenting with octave up for a pseudo 8-string tone, with some nice results so far. It's not a "hi-fi" octave up in isolation, but it blends well with direct tone. Mosky Silver Horse dual mode "Klone": the effect I want from it seems to change every time I use it, which is not the pedal's fault. It can give just a clean boost, a little more hair, or quite a bit of grind with the treble down to tame the fizz. JHS 3 Series Phaser: I had a problem with the switch last year that mysteriously fixed itself: if it goes again, I have a couple of dead pedals that can donate a switch. It's definitely a keeper for the sound quality. Ly-Rock "Simplifier" clone. I know, should have gotten the original DSM&H Simplifier, and I am considering the new Sub-Atomic pedal version. The cab sim is subtle but with some careful listening it does make a difference. The PSU is a mains-powered Harley Benton PowerPlant Junior, on sale at a very nice price. It has 5 isolated outputs, but you can see six pedals and the KongPressor is using two outputs for 18V. So I did have to use a splitter, which is not ideal. I got a little hum when using that with the Phaser, so the splitter now powers the tuner, the Klone and the preamp. There's still a very slight hum with the tuner in tuner/mute mode, but none in normal operation.
-
Misdee started following The Bass Gallery Camden
-
Cryptic, but I think I understand what is expected of me. I await your further instructions.
-
Grassie started following Boss GT-1B
-
-
Misdee started following Overplaying
-
I would have to say accordion, on the basis that to my ears any accordion is too much so a lot of accordion is unspeakable.
-
Haven't used my RM set up for a while. It's a 500 1x12 combo, for which I have a 1x12 extension cab. This week I took the combo out on its own and once again I was startled by how good it sounds. A little bit of the onboard grit and compression, not much else, and the onstage sound was splendid. I always regretted parting with my ABM which may be why I forget how good the RM is.
-
I have this epifani 600 watt @4 ohm cab for sale ..long story short I had an issue with an amp which cooked the original speakers along with the tweeter ..I have replaced the drivers with celestians which were £150.00 for the pair and installed a new tweeter ..weight wise it’s 25kg ..its collection only from Wymondham Norfolk Nr189ju or I can meet within 40miles with some petrol money .
-
- 3
-
-
My Sandberg's a factory plek'd and I like them a great deal. I have a bitsa with a Fender Mex Jazz neck that could do with a bit of a go over - not a surprise for a modestly priced part but I'm thinking of a plek this time rather than a human! Anyone had it? I'd be picking Charlie Chandler's place for the work as I've only ever heard good things from there. ta
-
Whichever one I'm playing, apparently.
-
Schwartz started following Feedback for Walshy
-
Sold my Quad Cortex to Paul, prompt payment, speedy replies with info and an all around great dude! 5/5 Basschatter. Cheers again mate.
-
No drummer beats a bad drummer every time, but why does anyone put up with a bad drummer? Play with a good drummer and your workload is halved. Play with a bad drummer and your workload increases 10 fold!!
-
3Leaf Audio Octabvre Mini & Proton MK3 *Price Drop £420 total*
iamtheelvy replied to simonlittle's topic in Effects For Sale
- 2 replies
-
- 1
-
-
- 3leaf audio
- octabvre mini
-
(and 2 more)
Tagged with:
-
Anyone had their mitts on one of these?
-
Grahambythesea started following Overplaying
-
Drums every time. For a while I was playing bluegrass, what a pleasure no drummers at all.
- Today
-
-
-
-
Hacked maybe? Nothing on TBG FB page?
-
lowregisterhead started following NS Design CR5 Radius bass
-
Up for sale is my NS Design CR5, in Amber. Bought from The Bass Centre just last year, and in near-new condition, apart from a small dink on the upper edge of the body shown in the photos. Light for a fiver at 4.2kg, and sits beautifully on the knee or a strap. Incredibly versatile magnetic / piezo pickup system with 2-band preamp. Specs are here: https://thinkns.com/instrument/the-ns-design-radius-bass-guitar/ns-design-radius-bass-guitar-cr/ Comes complete with gigbag. An amazing sounding and innovative design of bass, but I find myself reverting to my old Laklands, which just feel like home, so it's time to move it on. Collection preferred from near Woking in Surrey, but I can post within the UK at the buyer's cost and risk. Sorry, no trade offers please.
-
-
briansbrew started following Drum Kit
-
-
^^^ this It’s a beautiful instrument and will bring immense joy to who ever owns it next. tbh, I’m not sure why it’s not had more interest, sunburst bodies aren’t to everyone’s liking I guess, nor are maple finger boards. I’d like it to have gone to someone in the BC community , but I guess I’ll have to speak to Bass Bro’s about a commissioned sale or summat.